You may need to remove the drum in order to diagnose any strange noises coming from your Candy washing machine or uneven drum spinning. Although it may seem like a difficult task, you can manage it on your own if you have the correct assistance.
Time and money can be saved if you know how to remove the drum safely. We’ll guide you through the procedures in an easy-to-understand manner, whether you’re dealing with a broken part or simply want to give your machine a thorough cleaning.
Make sure you have the required equipment and a little patience before you begin. You can quickly remove that drum and get your washing machine operating like new if you have a well-thought-out plan.
| Step | Description |
| 1 | Unplug the machine |
| 2 | Remove the top panel by unscrewing the screws at the back |
| 3 | Take off the back panel by removing the screws |
| 4 | Disconnect the drive belt from the drum |
| 5 | Disconnect wires connected to the motor and drum |
| 6 | Unscrew and remove the motor |
| 7 | Remove the pulley by unscrewing the central bolt |
| 8 | Carefully lift and remove the drum from the machine |
- Preliminary actions
- Remove the parts that prevent the drum from being removed
- Video on the topic
- Candy Smart washing machine does not spin the drum.
- Replacing the bearings of a washing machine at home. Candy Aquamatic 6T (8T, 10T).
- How to disassemble a Candy top-loading washing machine to replace bearings.
- Candy GO 106 repair Disassembly, tank repair in the workshop, washing machine assembly
- Replacing bearings in a Candy 3 washing machine.5 kg. Video instruction.
- Candy step-by-step instructions, disassembling a washing machine
- Replacing bearings in a Candy washing machine || Washing machine repair in Kaluga
Preliminary actions
The most essential tools are undoubtedly in every owner’s small toolbox: a hammer, a drill, pliers, a screwdriver, screwdrivers, and hex keys. The devices on the list will be sufficient to disassemble the automated candy machine. The only additional requirement is that you have to get a metal hacksaw ready in order to fix the device.
It is preferable to avoid placing advance orders for parts that require replacement. It’s possible to purchase the wrong replacement parts by misinterpreting the component markings. It’s best to take the elements out first, and only then purchase new ones that are comparable to the ones that were taken out. After setting up the necessary equipment, you can begin working on the automated device. Since the repair process will take a long time, it is best to set up a comfortable workspace for yourself right away. Move the washing machine to the workshop or garage if possible.
If this isn’t feasible, the appliance needs to be relocated to a room that is large enough and has nothing that could obstruct the disassembly process. The room’s floors need to be covered with fabric. Additionally, you must confirm that the washing machine’s sides are easily accessible. You can begin repairs once the workspace is ready.
Although it may seem difficult, you can remove the drum from a Candy washing machine on your own if you follow the right instructions. This tutorial will lead you through the procedure, emphasizing important steps such as turning off the electricity, removing the front and rear panels, and securely removing the drum. You’ll discover effective and safe methods for doing repairs yourself, which will spare you the expense of hiring a professional, whether you’re changing the drum or fixing an issue.
Remove the parts that prevent the drum from being removed
It’s crucial to follow safety protocols when making repairs. Make sure to turn off the water supply tap and de-energize the washing machine before beginning any work. You can then move on to more manipulations after completing this.
The remaining liquid in the system must then be drained. To accomplish this, get ready a low container, set it underneath the device, and take out the garbage filter. The basin will receive the water flow. Make sure you rinse, dry, and set aside the removed filter element.
Take pictures of the sensors, wiring diagram, and other parts as you disconnect the elements. This will aid in precisely assembling the automated machine later on.
To take out the Candy washing machine’s drum, you should:
- disconnect the "top" of the case. Unscrew the bolts holding the panel, then slightly push the cover back and pull it up. Put the element aside;
- unscrew the screws that secure the back panel of the case. Remove the wall;
- remove the drive belt;
On the rear of the tank, rusty streaks point to a damaged bearing assembly.
- disconnect the wiring from the washing machine tank. Specifically, the contacts of the heating element and thermostat;
- loosen the central nut of the heating element. Use "rocking" movements to remove the heater from the socket;
- unscrew the bolts securing the motor of the automatic machine;
- remove the counterweight. The unit is located on top, it is easy to see immediately after removing the cover. Keep in mind that it weighs quite a lot. To disconnect the element, you will need a hex key. Unscrew the clamps holding the part and remove the weight from the housing;
- disconnect the wiring and hose from the water level sensor. Then carefully pull the pressure switch out of the machine;
- remove the powder receptacle;
- loosen the clamps of the hoses connected to the detergent drawer, remove them and remove the dispenser "hopper" from the housing;
- lay the washing machine on its right side. If there is no tray at the bottom, that"s good; if there is a bottom, you will have to remove it by unscrewing the mounting bolts;
- unscrew the screws located on different sides of the drain filter. Then push the snail, in which the filter element is located, into the housing;
- disconnect the plug with wires from the drain pump;
- loosen the clamps and unhook all the tubes from the pump;
- remove the drain pump from the automatic machine;
- pull the engine out of the housing. Take hold of the motor, move it slightly back and pull it down;
- disconnect the shock-absorbing elements supporting the washing machine tank from below.
In this manner, every component that hinders the removal of the drum will be eliminated. The tank needs to be removed and sawed in order to access the "centrifuge." At the next work stage, we will advise you on what to do.
It takes time and attention to detail to remove the drum from a Candy washing machine. You can complete the task efficiently if you pay close attention to the instructions and make sure you have the necessary tools on hand.
Prior to beginning, don’t forget to unplug the machine from the water and power supplies. Your first concern should always be safety. Take special note of the screws and connections, and record the location of all parts for easy reassembly.
Do not be afraid to ask for professional assistance if you find that some steps are too difficult. Seeking help is preferable to taking a chance on further harming your washing machine. Your washing machine can be restored to working order quickly with the correct care and approach.
