Repairing a washing machine occasionally necessitates accessing parts that aren’t designed to be readily accessible. One such part is the drum of an Indesit washing machine. Regardless of whether you’re trying to fix it seriously or find another use for it, opening the drum requires close attention to detail.
We’ll walk you through the process of cutting the drum of an Indesit washing machine in a safe and efficient manner in this guide. You can complete this process without causing harm to the surrounding areas if you have the proper tools and take the necessary precautions. It’s not as difficult as it might seem.
It’s crucial to know why you might need to cut the drum, what equipment you’ll need, and the safest techniques to employ before you begin. Let’s get started and make sure you’re ready for the challenge at hand.
- What tools to use?
- Sawing time and result
- Video on the topic
- how to saw Indesit tanks
- Important nuances of sawing a non-separable tank of an Indesit, Hotpoint-Ariston washing machine
- The subtleties of sawing a non-separable tank of an Indesit, Hotpoint-Ariston washing machine 🪚
- How to saw 🪚 a non-separable tank of an Indesit, Hotpoint-Ariston washing machine
What tools to use?
The tools used have a big impact on how quickly work gets done. A hacksaw for metal is the most basic tool. One major disadvantage is that it’s hard to cut. Cutting the tank will take more than an hour if you are using a hacksaw. In theory, you could experience pain just once if you break your washing machine at home. However, everyday repairmen are compelled to search for a more practical method of cutting.
A Gross wood saw with fine teeth can be used as an alternative to a typical hacksaw for metal.
Its perfectly cut plastic is precisely because of its hardened teeth. The tank’s surface does not fracture or bend as a result of the impact; the cut is extremely smooth. Gross will save roughly one to one and a half hours of cutting time when compared to a traditional hacksaw.
But it’s not the fastest way to divide the tank either. Using a jigsaw is the most effective way to cut the tank. In order to swiftly slice the drum, you’ll need:
- a standard electric jigsaw;
- two washers and a bearing (for a 4 bolt);
- a hacksaw blade.
An immobile jigsaw blade has a very large width. As a result, it is advised to modify a regular hand jigsaw’s thinner blade. View the appearance of a stationary hacksaw blade at one end. It can easily slide into the jigsaw hole thanks to this arrangement. An appropriate shape for a hand jigsaw blade would be similar.
After the thin hacksaw blade has been shaped so that it can fit into the jigsaw, the structure needs to be fastened with bolts, washers, and bearings. A bolt secures the installation of the washers on the sides, a bearing in the center, and other components. It appears that the design is fairly straightforward.
The jigsaw’s saw blade is placed inside and secured with a clamp.
Once the design is firmly in place, you can start cutting the tank in half. A hand jigsaw can also be used to saw the drum, but it will take a lot longer. It is preferable to take a few minutes to modify an electric jigsaw to fit a standard blade.
Sawing time and result
With the aid of a modified jigsaw, you can saw with the least amount of time. Cutting off all of the "ears" from the tank’s surface—that is, the protrusions on the weld seam that will obstruct sawing—is required before beginning the main work. The jigsaw can then be started after the blade has been placed on the seam.
It’s crucial to keep an eye on where the saw is placed; in order to protect the components, it should run nearly parallel to the tank.
Additionally, if this is your first time doing the task in this manner, it is still preferable to manually navigate the challenging sections of the tank (such as the area depicted in the above picture). This will facilitate the most cautious cutting of the tank.
It will take a master who has already "got his hand in" 45 to 50 minutes to saw the tank with a jigsaw. Remember that each time you divide the tank, the work will go more quickly even if it takes longer the first time. Jigsaw cutting is an extremely efficient method that requires little effort on the part of the person "sawing."
| Step | Description |
| 1. Disconnect | Unplug the washing machine from the power source. |
| 2. Remove top cover | Unscrew and take off the top cover of the washing machine. |
| 3. Detach front panel | Unscrew and remove the front panel to access the drum. |
| 4. Take out drum | Carefully remove the drum from the washing machine. |
| 5. Cut the drum | Use a saw to cut the drum at the desired point, making sure to wear safety gear. |
Although cutting the drum of an Indesit washing machine can be difficult, it is absolutely possible if you have the proper equipment and exercise caution. Taking your time and being cautious are essential whether you’re attempting to access the drum for repairs or repurposing it for a do-it-yourself project.
Make sure you have all the required equipment, including safety gear, before you start. Working cautiously will keep you safe while doing the work as well as help you prevent further damage to the machine. Keep in mind that it is difficult to return the machine to its initial condition once the drum has been cut.
If you want to repair your washing machine yourself or give the drum a new lease on life, disassembling it can be a satisfying project. To get the best results, just make sure you’re well-prepared and proceed cautiously.
Although cutting the drum of an Indesit washing machine may seem difficult, it is safe and easy to do with the correct equipment and procedures. With the help of this guide, you will be able to access the inner parts of the machine for repair or recycling without needlessly damaging it.
