Checking the pump on a Samsung washing machine

The pump in your Samsung washing machine may be the problem if it isn’t draining properly. Gaining knowledge about how to inspect and diagnose the pump can help you save time and money. You can make sure your washer functions properly by thoroughly inspecting the pump with the aid of this guide.

You’ll need to find the pump first. It’s typically located next to the drain filter at the bottom of the machine. There are a few easy steps to checking it that don’t require sophisticated technical knowledge. You can frequently identify common problems like clogs or blockages by doing this.

We’ll show you how to check the pump, remove any impediments, and assess whether it needs to be replaced in this article. You can maintain the best possible condition for your washing machine and save money on repairs by following these ultimate tips.

Choosing a testing method

Examine the signs of the malfunction closely before taking the washing machine apart. By evaluating the "symptoms," you can reduce the number of potential reasons for the malfunction. You have the option of selecting a diagnostic method based on the type of machine damage.

The following symptoms point to a drain pump failure:

• the washing machine cannot drain water into the sewer;
• uncharacteristic noises are heard when the machine is running;
• the pump hums and does not pump out water;
• the pump does not function, does not make sounds.

From basic to more complex, the washing machine’s diagnostics should be performed.

First, you should make sure there are no obstructions in the drainage system. De-energize the apparatus, set up a container with dry rags, take off the garbage filter, and empty out any leftover water. Wash the filter element if there is any dirt on it. Additionally, clean the walls of the hole that was created, shine a flashlight inside, and take out the trash that was inside. Verifying that the drain hose is bent and that it is positioned correctly in relation to the floor won’t be unnecessary.

The pump is most likely the issue if there are no blockages but the machine still refuses to empty the water. Let’s examine how to verify the serviceability of the pump in more detail.

Look at the element adjacent to the pump

The location of the pump, which is below in the right corner of the Samsung washing machine, can occasionally be noisy. A significant blockage of the element or an object lodged in the pump snail could be the cause of a washing machine malfunction. The section next to the pump is called the snail. The following will be the sequence in which the check is conducted:

• de-energize the equipment;
• open the hatch located below, in the right corner of the washing machine body (this way you will gain access to the garbage filter);
• unscrew the filter. Water will flow out of the hole, so be sure to stock up on dry rags and place a flat container under the washing machine;
• shine a flashlight into the hole to inspect the snail;
• remove any garbage or small foreign objects that are there.

Normally, nothing should be visible in this hole other than the pump’s impeller. The Samsung models with two motors—one for draining and one for recirculation—on the snail will be the only ones exempt from this rule.

Visual inspection algorithm

Let’s examine the fundamental guidelines for visually examining a washing machine. Make sure to unplug the machine’s power cord from the outlet as part of your safety precautions. Additionally, make sure there is no water left in the tank and disconnect the equipment from communications. The machine should then be positioned so that working with it will be convenient.

To prevent harm to the washing machine’s body, it is preferable to cover the floor with a blanket. The machine is then placed on its left side. It is possible to see the drain pump by looking down. You can now freely remove the pump to perform diagnostics and inspections.

First and foremost, you need to manually check the impeller’s stroke. It moves in sudden jerks normally. The impeller must then be shaken left and right, perpendicular to the axis. The pump will need to be changed if there is a lot of play.

If the pump is unable to drain the water from the tank, you can use the following methods to examine its serviceability and rule out control module malfunctions:

• add water to the washing machine tank. Enough to slightly cover the surface of the drum;
• de-energize the washing machine by pulling the cord out of the socket;
• remove the front panel of the machine to gain access to the drain pump terminals;
• disconnect the terminals or remove the plug (the connection method depends on the washing machine model);
• connect the terminals of the previously prepared cord with a plug;
• make sure that the connection is secure and safe, the contacts do not touch each other;
• insert the plug into the socket.

The pump is operating correctly if the water starts to drain after these adjustments. It’s possible that the breakdown has an entirely different cause. The washing machine’s main control board or other components might not be working properly.

Testing the pump coil

Using a multimeter is the third method that enables you to verify the pump’s serviceability. When the drain pump electric motor is winding, the tester should register resistance between 150 and 260 ohms. The following will be the sequence of events:

• Disconnect the machine from the mains;
• Disconnect the contacts of the pump;
• Turn on the multimeter by setting the resistance determination mode;
• Attach the tester"s probes to the contacts of the motor.

You can identify a short circuit if the device’s screen shows zero. Оогда мультиметр показывает непомерно большое значение, речь будет идти о разрыве обмотки. An indication that is noticeably higher than the normative value will raise concerns about stator winding damage.

Repairing the pump winding is not cost-effective; it is advisable to replace the drain pump completely.

Although it may appear difficult, checking the pump on your Samsung washing machine is actually fairly doable with the right patience and strategy. You can keep your machine operating smoothly and prevent common problems like drainage issues by routinely inspecting the pump. To ensure your safety, make sure you unplug the washer before beginning any checks.

First, get to the pump, which is often found near the machine’s base. It can be obstructed by debris or lint, so clear it out to ensure proper drainage. If obstructions are discovered, carefully remove them. Additionally, look for wear and tear or obstructions in the hose and filter of the pump.

After examining the pump, you can run a test cycle to see if the problem has been fixed. It might be time to call an expert if the machine still won’t drain correctly or if you hear strange noises. Your washing machine’s lifespan can be increased and optimal functioning maintained with routine maintenance and prompt attention to any problems.

In conclusion, inspecting the pump is a simple yet crucial part of keeping your Samsung washing machine in good working order. You may have trouble-free laundry days for years to come if you remain vigilant and take care of minor issues before they become bigger ones.

One of the most important steps in troubleshooting a Samsung washing machine that isn’t draining properly is to inspect the pump. The pump is in charge of taking water out of the drum; if it becomes clogged or breaks down, drainage issues and possible leaks may result. We’ll show you how to check and clean the pump in this post, so you can get your washer back in working order without having to pay for an expensive repair.

Video on the topic

Before changing the pump, check it in the washing machine

Samsung washing machine does not drain water || Repair of washing machines in Kaluga

How to check the drain pump (pump) of the washing machine automaton.

How to check the drain pump of a Samsung washing machine

Correctly checking the pump of a washing machine