Even though disassembling an Indesit washing machine might seem difficult, anyone who is willing to try can manage it with the right help. Knowing how to disassemble a machine can save you time and money on repairs, whether you’re dealing with a malfunction or just want to give it a thorough cleaning.
Make sure the washing machine is unplugged from the power source and gather the required tools before beginning. Prioritizing safety is crucial when handling electrical appliances.
You can easily access the main components of your Indesit washing machine, including the drum, motor, and control panel, by following this step-by-step guide. You can confidently disassemble your machine by following these instructions.
| Step | Description |
| 1. Unplug the machine | Ensure the washing machine is disconnected from the power supply. |
| 2. Remove the top panel | Unscrew and slide off the top panel of the machine to access internal components. |
| 3. Detach the control panel | Carefully unscrew and remove the control panel, making sure to disconnect any wires. |
| 4. Take off the front panel | Unscrew the front panel of the washing machine to access the drum and door area. |
| 5. Remove the |
- Preparation
- How to remove the main parts
- How to disassemble the tank and drum
- Features of disassembling units with vertical loading
- Video on the topic
- how to disassemble an Indesit washing machine
- Restoration and repair of an Indesit washing machine. Part 1 – Disassembling an Indesit washing machine.
- How to disassemble an Indesit washing machine
- Repair of a narrow Indesit washing machine with your own hands.Part 1 Disassembly
- Indesit (Indesit) how to properly disassemble a washing machine.
- Disassembled an Indesit washing machine. What can you profit from!? Scrap metal.
- Disassembly and assembly of an Indesit washing machine, Indesit
- INDESIT WASHING MACHINE DOES NOT TURN ON INDESIT CONTROL UNIT REPAIR. Step-by-step instructions!
Preparation
Make sure you have the required tools before you begin any repairs. You might require:
- a set of flat and Phillips screwdrivers;
- end and open-end wrenches;
- a set of heads and a brace;
- a hammer;
- a multimeter;
- a chisel;
- a hacksaw for metal;
- pliers;
- WD-40;
- an awl.
To dismantle a washing machine, you might require multiple tools.
Note that the list of tools and equipment provided is as comprehensive as possible and enables you to carry out any type of repair. You can get by with a much smaller set in certain situations.
It is important for you to know that troubleshooting might take more than a day and that the removed parts will occupy a large amount of space. Thus, if at all possible, relocate the unit to a utility room, garage, or shed where the parts can be organized neatly and it won’t cause any issues.
Locate the warranty card and confirm that the warranty has ended before disassembling the automatic machine. Keep in mind that equipment repaired at home does not fall under the manufacturer’s warranty; therefore, if the equipment is still under warranty, get in touch with a specialized service center.
If there isn’t any available space, arrange the work on the spot. Set up a minimum 2-by-2-meter floor area, remove any furniture and carpets, and cover it with film or old newspapers. Carefully disconnect the hoses and unplug the washing machine from all utilities.
Emptying the remaining water from the tank is essential to prevent it from getting on other components when disassembling. To achieve this, put a dry cloth underneath the machine, take out the drain filter, and let the water run out of the opening until it is completely empty. Along with the filter, remove the detergent drawer as well (usually requires pressing the middle lock and pulling the section in your direction at the same time).
Some skills are needed in order to disassemble the washing machine. It is preferable to give the task to experts if you lack confidence in your own skills.
What should I do first now that the Indesit washing machine is prepared for disassembly?
How to remove the main parts
The majority of the washing machine’s parts are concealed inside the casing.
This is a schematic illustration of the washing machine’s major components.
The top panel of the machine is secured by two bolts that must be unscrewed before we can start disassembling the case from there. The panel should then be pulled toward you and slightly raised while you stand in front of the device.
The rear panel is the next to be discussed. It is secured in place by six screws. Using a screwdriver, you can remove them. The drive belt is located directly behind the cover; it is best to remove it now and turn the pulley wheel clockwise with caution.
Greetings, readers! Join our Telegram channel to receive helpful housekeeping and other information: Visit the channel.
The diagram illustrates which way the pulley should be rotated in order to remove the belt from it.
Remove a few screws that are situated in the detergent tray’s niche in order to disassemble the instrument panel. After that, unplug the pipe and the wires, take the panel out of the latches, and set it aside.
In order to efficiently and accurately reassemble in the opposite order following repair, it is possible to take pictures of the parts’ locations and the contacts’ connection diagram while disassembling.
At the summit The water intake valve and its contacts, the counterweight (stone), the pipe that joins the powder compartment to the tank, the pressure switch, its tube, and its contacts are all part of the washing machine. Take out each of these components.
Take out the rubber seal and hatch door before removing the front panel. With a screwdriver, bend the cuff to begin the disassembly process, then carefully remove it. To dismantle the door, loosen the multiple bolts holding the hinge. Next, take out the screws holding the front panel in place and set it aside.
Remove the rubber cuff by gently bending it with a screwdriver.
It is necessary to disassemble the electric motor, lower counterweight, drain pipe, shock absorbers, and tubular electric heater (TEN) at the bottom, which support the tank.
The end, which is visible beneath the tank, is where you can easily locate the heating element. Take out every wire from the heating contacts. Take off the nut that is situated in the middle of the contacts. After the element has been loosened, take it out of the groove. After removing the engine’s ground wire and power plug, loosen the bolts holding it in place.
The heating element is beneath the tank; to remove it, unscrew the nut in the center and disconnect the contacts.
You must turn the washing machine on its side in order to remove the drain pipe and shock absorbers. Disconnect the drain pipe from the pump and remove the clamp with pliers. Next, remove the shock absorbers’ screws.
The clamps holding the drain pipe must be loosened and removed in order to disassemble it.
Remove the tank once all the components have been disassembled. However, what if this is insufficient? Inside a non-separable tank, how can the drum of an Indesit washing machine be disassembled?
How to disassemble the tank and drum
Generally speaking, Indesit brand washing machines have non-separable tanks; in the event that any internal component fails, the manufacturer advises replacing the entire assembly. Disassembling the tank is still preferable if you need to replace a bearing, for example, because these repairs can be costly.
The washing machine’s non-separable tank, which houses the drum, is visible in the picture.
Pulley removal is the first step in disassembly (the wheel through which the belt passes). There are heavy loads on the bolt that fastens this component, so it must hold firmly. As a result, when the machine is put together, it is frequently glued in addition to being tightened. It is preferable to gradually loosen the bolt with an Allen key of T40 size. Should the component resist, try applying WD-40 or gently removing the glue with a hammer.
Use an Allen key of T40 size to unscrew the bolt holding the pulley in place.
After that, turn the tank over and carefully cut the seam (where the two halves of the part are soldered) with a hacksaw. First, use a drill to make preliminary holes all the way around the seam (the halves can be quickly fastened together with bolts).
Once the tank is open, remove the fasteners, unscrew the bolts holding the drum in place, and remove the tank wall. At this point, you can dismantle the drum by removing the bearings and seal.
Starting with the bearing that is nearer the drum’s outer edge, we proceed. After setting the hatch opening portion in place, we hammer and place the chisel on the metal ring’s outer rim.
You will need a hammer and a chisel to remove the bearing from the drum.
When removing a bearing, we closely watch where the chisel is placed. If the tool slips and the blow strikes the inner ring, the bearing may fly out, making it very difficult to extract the remaining part from the socket. Using the same method, we disassemble the inner bearing before removing the seal.
Features of disassembling units with vertical loading
What is the process for disassembling a vertically loaded Indesit washing machine? Because the device has many of the same components as a front-loading washing machine (pressure switch, water intake valve, drum, tank, control board, pump, etc. d.), the process won’t be all that different from what was previously described. The primary distinctions are that the "vertical" drum axis is supported structurally by two bearings, and occasionally the tank is home to a self-positioning sensor that fixes the drum with the flaps up.
The picture shows the vertical loading washing machine’s structure.
Using a screwdriver to pry the part away and moving it in your direction, we start to disassemble the unit from the control panel. Don’t forget to disconnect the contacts along the way. We also disassemble the control board that is located beneath the panel.
Next, we take off the side panels and top cover (the fasteners for which are often found beneath the control board), and we carefully unclip the clamp from the drum.
The remaining steps will be to remove each part in turn. A top-loading washing machine’s bearings are on both sides of the drum, so removing them will take some extra time.
If our post assists you in doing your own washing machine repair, we will be happy. You’ll succeed if you pay attention to the operating instructions, take your time, and exercise caution.
An Indesit washing machine requires time and meticulous attention to detail when disassembling. Before you begin, make sure you have the required equipment and a tidy work area. To prevent breaking the machine, carefully disassemble each part, starting from the top panel and working your way down to the drum. Pay close attention to the screws and connections.
It’s usually a good idea to consult the user manual or get assistance from a professional if you have any questions about any step of the process. By doing this, you can avoid expensive errors and guarantee that your washing machine will continue to function properly.
You can confidently disassemble your Indesit washing machine by following these steps, regardless of whether you’re replacing a part or simply troubleshooting an issue. Stay organized and, if necessary, take pictures to document the situation.
You will need some basic tools, patience, and a well-defined plan in order to disassemble an Indesit washing machine. First, turn off the water supply and unplug the machine. Then, to gain access to the drum, motor, and other parts, carefully remove the front, back, and top panels. Keep track of every component as you proceed, paying close attention to wiring connections, clips, and screws. You can safely disassemble the washing machine for maintenance or repairs if you pay close attention to each step.
