You may find yourself with a drum full of water and no idea what to do if your Indesit washing machine isn’t draining water correctly. Thankfully, manually emptying the water is a simple procedure that doesn’t require any specialized equipment or knowledge. Knowing how to drain your machine can save you time and trouble, whether it’s stuck in the middle of a cycle or you need to empty it for maintenance.
We’ll walk you through the easy steps in this guide to safely and quickly empty your Indesit washing machine. We’ll go over a few different approaches so you can select the one that best suits your needs. By doing this, you can prevent future problems with your machine and any possible water damage.
Make sure you have a few necessities on hand before you begin, such as a towel and a shallow dish or container. These will assist you in controlling spills and maintaining a dry and tidy workstation. Let’s empty your washing machine now and get it operating again!
- Options for removing liquid from the tank
- Unscrew the plug of the garbage filter
- Manipulating the hose
- Emergency opening of the hatch door
- Disconnect the pipe
- Video on the topic
- INDESIT washing machine. How to unscrew the drain cap? Drain cap on the Indesit washing machine
- How to drain water from the Indesit washing machine wuin81
Options for removing liquid from the tank
The water cannot be drained using a special program if the automatic machine is not responding to any commands from the user. The tank can be manually emptied in a few different ways. It is essential to evaluate the circumstances and select the best course of action. The primary choices for drainage that is forced:
- through the drain hose, without activating the pump;
- by unscrewing the plug of the garbage filter;
- by opening the hatch door of the washing machine;
- by disconnecting the drain pipe.
Make sure to de-energize the apparatus and close the shut-off valve before emptying the water from the automatic machine.
You can use any of the listed methods, regardless of the type of malfunction that occurred in the system. There are specific preparations needed for each drainage method. Let’s examine the steps that must be performed when selecting a method for draining liquid from the unit.
For safety reasons, turn off and unplug the Indesit washing machine before beginning to drain the water. Next, find the drain filter, which is typically concealed behind a small panel, at the base of the washer. To allow the water to drain, open the panel, set a towel or shallow tray underneath, and carefully remove the filter cap. Expect a little mess because water can spurt out fast. In the event that the machine is still full, you might have to manually drain the water by gently tilting it or by siphoning it out of the drum with a hose.
Unscrew the plug of the garbage filter
Every Indesit washing machine has a unique filter that keeps coins, paper, and paper clips from getting into the pump. The filter element is very easily accessible; it is situated in the lower right corner of the machine’s front, behind the false panel. How water is drained through the waste filter is as follows:
- using a slotted screwdriver, release the latches and remove the decorative panel;
- slightly tilt the washing machine on its left side, carefully lean the body against the wall and place a basin under the bottom to collect the liquid. Make sure that the machine does not slip;
- cover the floor around the washing machine with rags that absorb water well;
- unscrew the filter a few turns until water flows out from under the plug. There is no need to completely remove the filter element from the system;
- collect the liquid in a container.
In this situation, it will be extremely difficult to guarantee a "clean" water drain; some liquid will still spill. It will be necessary to wipe the floor by hand. However, this method also has a big benefit: since you don’t have to disassemble the washing machine, it will only take a short while to complete.
Manipulating the hose
In a matter of minutes, the second technique will also assist in emptying the washing machine’s drum. Using the drain hose, you can easily and quickly remove water from the washing machine. This method can be applied if there is unrestricted access to the location where the hose is connected to the sewer network. To empty the water on your own:
- disconnect the drain hose from the sewer pipe;
- unfasten the tube from the back wall of the housing, remove the plastic retainer holding the hose at the base of the washing machine;
- place the drain hose below the washing machine tank, direct its free end into a bathtub, sink or a pre-prepared container;
- drain the water, it should flow by gravity.
Not all Indesit washing machines, though, are permitted to empty water in this manner. Contemporary models feature an unique internal loop intended to stop leaks while the equipment is operating. After that, using the drain hose to manually remove water will be impossible. This design feature is exclusive to washing machines made after 2015. By consulting the user manual, you can determine whether your machine has a loop.
Emergency opening of the hatch door
You can try opening the CM hatch and manually scooping out the liquid if, for some reason, the first two methods failed to remove water from the system. Check the water level in the drum before "breaking" the door. It is crucial to tilt the washing machine in the direction of the wall because liquid nearly always rises above the lower edge of the hatch. In this manner, in the event that the door is suddenly opened, a "waterfall" won’t spill out of the tank.
Water can be easily removed from the machine by opening it and using a mug or ladle to scoop out the liquid. There might be some challenges when attempting to unlock the device.
A thin rope can be used to open the washing machine. The locking lock is located where the lace is inserted, which is into the space left by the door and the housing wall. Pulling the rope’s ends is required to get the rope as deep as possible. You keep doing these things until you hear the distinctive click. After that, the hatch can be opened.
You will stop at nothing to remove items from the drum and remove the machine from the water in the event that it breaks down. Consequently, this is the only option available to you if you are unable to unscrew the garbage filter and the drain hose is clogged, preventing the liquid from flowing naturally. The method’s drawback is that because scooping takes a while, it takes more time and effort.
Disconnect the pipe
It is best to use forced water drainage via the pipe as a last resort after all other attempts have failed. This technique might get rid of the source of the machine’s freezing in addition to removing water from the system. Since a blockage in the drain pipe can occasionally cause the machine to stop operating properly. The following is the action algorithm:
- remove the top cover of the washing machine, then the back wall;
- find the pipe – it is located under the drum and connected to the pump;
- place a basin under the pipe, put several dry rags on the floor to collect the flowing water;
- using pliers, remove the clamp connecting the pipe and the pump;
- disconnect the pipe from the pump – liquid will start to pour out of it.
! If the water does not drain, the element needs to be cleaned because there is a blockage in the pipe cavity.
The primary drawback of this approach is how challenging it is to put into practice. A woman will find it challenging to move the washing machine away from the wall and to partially disassemble it. However, it is possible to completely drain the system of all water.
| Step | Description |
| 1 | Turn off the washing machine and unplug it from the power source. |
| 2 | Locate the drain hose, usually found at the back of the machine. |
| 3 | Place a shallow container or towel underneath the drain hose to catch any water. |
| 4 | Remove the drain hose from its holder and lower it into the container to allow the water to drain out. |
| 5 | After the water has drained, clean the drain filter if necessary, which is typically found at the bottom front of the machine. |
| 6 | Replace the drain hose and ensure it"s securely in place before plugging the machine back in. |
| 7 | Turn on the washing machine and run a short cycle to ensure everything is working correctly. |
With a little assistance, emptying the water from an Indesit washing machine is an easy task that anyone can perform. When handling a machine that has become stuck in the middle of its cycle or getting ready to move or store the washer, it’s critical to understand the safe and effective methods for removing water.
Locate the drain pump filter first, which is often located near the machine’s front bottom. Slowly remove the filter cap after opening the access panel gently and preparing a container or towel to catch any spilled water. Allow the water to slowly drain, paying attention to the flow to prevent spills. You may need to manually empty the water by lowering the hose into a bucket or inspect the drain hose if the water isn’t draining through the filter.
Keep in mind to routinely clean the filter to avoid obstructions and preserve the effectiveness of your washing machine. In the event that you face any obstacles or if the water doesn’t drain, it may be necessary to seek professional assistance. Your Indesit washing machine can last longer and continue to function properly with routine maintenance and quick fixes for problems.
