How to remove the activator of a semi-automatic washing machine?

If you’re unfamiliar with the procedure, removing the activator from a semi-automatic washing machine may seem like a difficult undertaking. But if you follow the right procedures, it can be completed quickly and easily.

Understanding how to remove the activator safely is crucial, regardless of whether you’re working with a broken part or just need to clean the machine. We’ll walk you through the steps in this guide to make handling this frequent problem simple for everyone.

It only takes a few simple tools and a little perseverance to remove the activator from a semi-automatic washing machine. You must unplug the machine and make sure there is no water inside before doing anything else. Typically, a central bolt or screws—which are simple to remove with a wrench or screwdriver—secure the activator. After the fasteners are removed, carefully remove the activator, taking care not to damage any nearby components.

What is this element for?

You must comprehend what the activator cm semi-automatic is in order to remove it. This is a unique plastic disk that is fixed to the machine tank’s bottom or wall. It starts the cycle, rotates, scrolls the laundry, and then "activates" the wash.

An essential component of a semi-automatic device that gives the laundry "mixing" and "shaking" in the "centrifuge" is the activator.

The "front" surface of the plastic disk has unique blades. Although activators come in a variety of sizes, their purpose is always the same: to mix the contents of the tank. It helps ensure that laundry is washed more thoroughly and does not get clumped together.

On the surface of the drum, there are "ribbers" that serve as the activator in automatic machines. They both have the same job to do: keep the laundry from clumping together and "shake" the cleaned objects. Activators in semi-automated washers can be positioned either horizontally or vertically. The disassembly procedure for the disk will vary depending on its location. Let’s examine each circumstance in isolation.

Type SM-1

The activator of these semi-automatic devices is mounted on the "centrifuge" wall. The following machines are under discussion: "Otrada," "Samara," and "Malutka." It is preferable to create a unique key by hand in order to disassemble a Soviet washing machine. The tool will facilitate the disk’s disassembly.

Since each activator requires "its own" tool, it is nearly impossible to find a key that is suitable for disassembling Soviet semi-automatic machines for sale. It is therefore preferable to create a unique key. Furthermore, making a homemade product like this won’t take long. For instance, you’ll need the following to create a key for the "Malutka":

• a tube (15 cm larger than the diameter of the "activator" disk);
• a drill of 6 mm;
• a pair of bolts and nuts.

To create a key:

• drill two holes in the tube. They should be at a distance of 9.5 cm from each other;
• insert the bolts so that one to one and a half centimeters of them "look out" from the back side;
• fasten the elements with nuts.

Now that the key is designed, you can take the activator apart. The following will be the sequence of events:

• de-energize the washing machine;
• remove the plug from the side of the washing machine;
• turn the disk by hand so that the holes on the impeller and the wall of the housing coincide;
• lock the engine rotor with a screwdriver;
• "insert" the homemade key into the activator and unscrew the element.

Which way the dial should be turned depends on the particular semi-automatic model. Replace the old activator after taking it apart. The machine is assembled in the opposite order.

Option SM-1.5

These washing machines have a somewhat intricate design. We are discussing the "Fairy," "Ivushka," and "Mini-Vyatka" machines. Here, as in machines with a collector motor, the plastic disk rotates as a result of the belt drive mechanism. The activator can be disassembled as follows:

• pull the power cord of the machine from the socket;
• loosen the screws holding the motor;
• drop the belt from the pulley;
• unscrew the nut securing the pulley;
• remove the stopper;
• take out the activator.

Remember that there should be no more than 2 mm separating the disk from the tank when replacing the activator.

There is only 0.5 mm of axis shift possible for the activator. Accurate adjustment of the element is crucial for the equipment to function normally.

Type SM-2

These models vary primarily in their compact dimensions. They can wash up to 2.5 kg of dry laundry in a single cycle. These semi-automatic machines have an activator on the side. When disassembling the component, the following sequence of steps will be followed:

• de-energize the machine;
• remove the rear panel of the case;
• drop the drive belt;
• remove the pulley by unscrewing the bolt holding it;
• dismantle the "activator" disk.

The new component is reinstalled in its original location. After that, the machine body is assembled, the drive belt is tightened, and the pulley is put back. Changing the activator will require ten to fifteen minutes.

Although removing the activator from a semi-automatic washing machine may appear difficult, it is doable with the correct method. You can complete the task without causing any damage to your computer by adhering to the instructions provided.

Keep in mind that each washing machine model may differ slightly, so be mindful of that and handle the activator with care. To protect yourself, always unplug the machine from the power source before beginning any repairs.

You can quickly remove the activator and get your washing machine ready for its next use with a little perseverance and caution.

Video on the topic

Select and replace the gearbox on a semi-automatic washing machine

Saturn semi-automatic how to remove the activator

How to remove the activator of a washing machine. Repair of washing machine. How to remove the activator.