How to lubricate a bearing in a Samsung washing machine?

Lubricating the bearing is an essential task for maintaining the smooth operation of your Samsung washing machine. This frequently disregarded maintenance procedure can help your appliance last longer and save expensive repairs. In washing machines, bearings hold the drum in place and facilitate its smooth rotation. They may eventually dry out or wear out, which could result in loud operation or even worse problems.

With some assistance, lubricating the bearing is an easy task that you can perform on your own. You must first remove the drum or the washing machine’s back panel in order to gain access to the bearing. Once you have access, the key to making sure everything functions properly is to clean and apply the appropriate lubricant. In addition to keeping your machine operating at peak efficiency, this task helps prevent future malfunctions.

We’ll go through each step of lubricating a Samsung washing machine’s bearing in the sections that follow. You can maintain your washing machine in top condition and take advantage of its best performance for many years to come by following these instructions.

Description of the procedure

Rebranded seals and bearings under the Samsung brand are available and don’t need to be lubricated further before being installed in the machine. It is advised to change the lubricant if you buy dubious parts from an unidentified manufacturer. The machine’s old bearings need to be checked for damage; if they are in good condition, replacing them is not necessary; instead, they can be liberally lubricated with a special compound.

The parts are first degreased with WD-40 aerosol before being processed, and only then are they lubricated.

If the bearing collapses, remove the protective cover with a tool before lubricating it. The material is evenly applied to the inner ring where it comes into contact with the bushing. Following processing, the seal is put in place and the bearing is lubricated.

How should a non-separable bearing be properly lubricated? Additionally, the part is pre-treated with WD-40 aerosol and dried with a cloth. In sealed bearings, the protective cover is not easily removed. The following will be the algorithm for subsequent actions:

• fill the inner ring of the element with polyethylene (a regular bag);
• cut the neck of the tube with lubricant so that its diameter matches the size of the ring;
• place the tube with the substance on the inner race, start squeezing out the lubricant until it appears on the other side;
• screw the bag to distribute the lubricating composition inside;
• wipe off excess with a rag, install the part in its original place.

It follows that mandatory processing applies to both sealed and separable bearings. In either scenario, there are no lubrication issues.

It is imperative that the composition be applied to the rubber seal. In addition to the bearing, the Samsung washing machine’s seal needs to be lubricated. The rubber is worked with with a standard syringe. The material is inserted into the seal’s inner groove, and the seal is then replaced.

We purchase a lubricating composition

A variety of specialized lubricants for washing machine parts are available for purchase. Every product has unique characteristics. The material that is applied to seals and bearings needs to be:

• moisture-resistant. The purpose of the seal is to protect the bearing from water. That is why the lubricant for the rubber seal must be resistant to water and not be washed out by it over time;
• resistant to temperature changes. During the operation of the machine, the water is heated up to 95 degrees on certain programs. Also, the shaft, when rotating, becomes very hot. Only a heat-resistant compound will not lose its properties and will provide protection against water getting into the unit;
• suitable for rubber parts. Seals lubricated with a low-quality substance can become very hard, or, on the contrary, soften. This will lead to a violation of the seal"s tightness;
• thick. Then the compound will not leak out during operation of the washing machine.

It is best to avoid using automotive lubricants when performing repairs since they are completely ineffective at lubricating washing machine bearings.

The following lubricants are typically used by service center technicians:

• AMPLIFON is a waterproof compound from an Italian manufacturer;
• Anderoll is a product recommended specifically for Indesit machines. It has two forms of release – in a 100 g can., or in syringes;
• STABURAGS NBU 12 is a waterproof and temperature-resistant compound that has proven itself well in the market;
• LIQUI MOLY "Silicon-Fett" – expensive German grease. Very high-quality product, meets all requirements. Produced in fifty-gram tubes.

Read the features and specifications of the composition carefully before selecting one to treat your seals and bearings. Examine reviews from users and experts.

Understanding how to lubricate your Samsung washing machine’s bearings is essential if you want it to function smoothly. This procedure prolongs the life of your appliance while also assisting in noise reduction. You can maintain optimal performance and prevent expensive repairs by cleaning and lubricating your machine according to the instructions.

Dismantling the body panels

You must reach the washing machine’s parts in order to lubricate them. Since the bearings are inside the machine’s tank, it will be challenging to get to them without nearly disassembling the entire washing machine. First things first, take the body apart. The following will be the order of events:

• remove the top cover by unscrewing the bolts that fix it;
• unscrew the screws holding the rear panel of the unit, move the wall to the side;
• remove the container for detergents;
• unscrew the bolts located behind the cuvette, as well as on the opposite side of the control panel;
• release the latches that fix the control panel. When deciding to disconnect the wiring, it is necessary to photograph the connection diagram so as not to make a mistake during assembly. However, you can avoid disconnecting the wires and carefully remove the panel to the top of the machine;
• open the hatch door, remove the outer clamp holding the cuff;
• tuck the sealing rubber inside the drum;
• unscrew the bolts securing the door lock, unfasten the power supply wiring from it;
• unscrew the other bolts holding the front wall.

Therefore, the casework will be finished. The Samsung washing machine’s "insides" must then be removed. It won’t be feasible to remove the tank from the machine until all of the pipes, wires, and other components are disconnected.

Although lubricating the bearing in your Samsung washing machine may seem like a difficult chore, doing so is crucial to preserving the appliance’s smooth functioning and extending its lifespan. You can make sure that your machine operates effectively and stays away from common problems like loud noises or uneven spinning by closely following the instructions provided. Maintaining adequate lubrication helps to keep the drum turning steadily and silently by lowering wear and friction.

Make sure you have the appropriate lubricants and tools before you begin. Using the products advised by the manufacturer is essential to preventing any possible harm. Additionally, remember to turn off your machine’s water and power supplies to maintain safety throughout the procedure. By taking these safety measures, you can reduce risks and increase productivity.

Check the bearing’s condition frequently after lubricating it to detect any early warning indications of problems. Monitoring the operation of your washing machine will enable you to take care of any problems before they get out of hand. To ensure that your washing machine keeps functioning properly for many years to come, keep in mind that routine maintenance is essential.

Video on the topic

Samsung washing machine. Repair after repair.

The washing machine rattles loudly during spinning! Replacing bearings on a Samsung washing machine!

Repairing a Samsung washing machine, noise during operation (quick overview of replacing bearings).

Replacing bearings in a Samsung Diamond washing machine