The washing machine spins for a long time

It can be annoying and time-consuming if your washing machine is taking longer than usual to complete the spin cycle. It is possible that you will find yourself impatiently waiting, wondering if there is a serious reason for the delay. Although there may be multiple causes for this problem, most of them are simple to resolve on your own.

An uneven load can occasionally be the only thing keeping the machine from operating at maximum efficiency. In other cases, it could be the result of a dirty filter or a clogged drain. Longer spin times could also be the result of incorrectly adjusted washing machine settings.

This post will explain the most frequent reasons for a slow spin cycle in your washing machine and offer helpful advice on how to restart it. You’ll find helpful advice to help you solve the problem without needless stress, regardless of whether you’re dealing with a small problem or something that requires a little more attention.

The machine does not complete the spin

It is extremely risky for the washing machine to spin the clothes indefinitely rather than stopping the drum and finishing the job because this can cause the machine to overheat and damage the bearings. For this reason, it is crucial to use the safest technique to turn off the equipment as soon as possible in this situation. In order to accomplish this, you must press the "Start / Pause" button and wait for the drum to finish rotating.

The only thing left to do is take the power cord out of the outlet and de-energize the device if the button is inoperative.

If you can only turn off the "home assistant" by pulling the cord out of the socket, then you shouldn’t put it off. Otherwise, you shouldn’t abuse it.

Why such a problem appeared?

Numerous tasks can be completed by any machine in a single working cycle. She must first open the inlet valve in order to retrieve the tank’s contents. After that, the detergent and liquid are combined, and the motor starts the drum’s rotation. Following the socking phase, the washing machine disposes of the used water, obtains new, clean water, and combines it with common household chemicals for the primary wash, which is stored in a separate section of the powder receiver.

As soon as the main stage of clothing processing is completed, the device will again merge the used liquid, and then again gain clean water – this time for rinsing. After rinsing, an excavation will begin, the problems with which we today will try to solve. The malfunction during push -ups can sometimes be tracked using the error code that the machine will display on the information display, but if the household appliances do not report which element has broken down, then the cause of the malfunction will have to be sought by yourself. In this case, it is better to know the structure of the washing machine in order to accurately determine the malfunction. First of all, you should make sure that the problem is not due to user error.

• Overloading the washing machine.
• Attempt to wash one, but excessively large item.
• Too few items were loaded for one work cycle.
• The user selected a mode that does not provide for clothes spinning.
• A foreign object got into the drum, for example, a bra bone, a hairpin, a paper clip, a nail, a needle, a coin, etc. Even such small items can interfere with the work process, due to which the drum will not spin at the proper speed during spinning.

The clothes will just bunch into a tight lump if you let them get too heavy, which will throw the drum off balance. The "home assistant" will immediately halt the work cycle in order to allow the user to remove the excess items if this behavior causes damage to the drive.

This can also occur when there is insufficient laundry loaded. Many modern machines are capable of sensing very light loads on clothing and ceasing to spin. If the cause is a foreign object that has entered the area between the drum and the tank, it needs to be removed right away to avoid damaging the plastic components, which could cause the machine to leak while it is in use, as well as obstructing the drum’s free rotation.

You can start diagnosing the device at home if you are certain that the issue is not with any of the five points mentioned. You will need to partially disassemble the equipment in order to accomplish this, but if you follow our instructions, it should be simple to accomplish without much experience or knowledge.

A number of common problems, such as an uneven load, a clogged filter, or a sensor malfunction, could be the cause of your washing machine’s slow spinning. Restoring normal spin times and averting possible machine damage can both be achieved by taking care of these issues.

We look at the motor and tachometer

We will start by studying the two components that malfunction the most frequently: the tachometer and electric motor. The electric motor frequently loses power as a result of brush wear, making it incapable of accelerating the drum to the high speed needed for superior spinning. This makes spinning impossible and causes the washing machine to break down. How can the motor brushes be checked correctly?

• De-energize the machine and disconnect it from all communications.
• Remove the top cover of the washing machine, for which you must first unscrew the fixing bolts.
• Remove the back wall of the device body.
• Remove the drive belt from the pulleys.
• Disconnect all wires from the electric motor.

It is best to write down or take a picture of the proper connection before disconnecting the wiring so that you have a reference when you reassembly it.

• Unscrew the motor clamps.
• Remove the unit from the device body.
• Unscrew the small screws on the sides of the element to remove the carbon brushes.
• Visually assess the wear of the brushes.
• If at least one brush is worn out, then both elements must be replaced at once, even if one of them is in perfect condition.

If there was nothing found when the brushes were checked, the tachometer might need to be repaired. A multimeter needs to be used to check the tachogenerator:

• Switch the tool to ohmmeter mode.
• Measure the resistance of the tachogenerator with it.
• It is good if the value is around 60 Ohms.
• Then the device should be switched to voltage measurement mode.
• Measure the voltage at the terminals of the tachogenerator, while simultaneously turning the engine.
• Everything is fine if the multimeter shows a reading of about 0.2 V.

Spinning will not be possible if the tachogenerator is malfunctioning because it will not be able to regulate the speed of the electric motor. If you discover that the element is the root of the problem, make sure to replace it.

Something may not be functioning properly if your washing machine is taking a long time to spin. You can frequently fix the issue on your own by inspecting basic components like the load balance, drain hoses, and filter cleanliness. By taking these easy steps, you can prevent expensive repairs and maintain the proper operation of your machine.

If these solutions are ineffective, there may be a more serious problem with the motor or other internal components. In that instance, it might be best to speak with a professional. Don’t ignore the issue; taking care of it right away can stop additional damage and increase the lifespan of your washing machine.

Recall that the best defense against spin cycle issues in the future is routine maintenance and appropriate use. Watch the performance of your machine and take appropriate action if you see any changes. You can save time and money in the long run by paying a little attention now.

Video on the topic

Why the washing machine takes a very long time to wash 🕓

The washing machine does not reach maximum speed in spin mode. Just rotates slowly.

The washing machine spins for a long time and freezes at 8 minutes?Solution to the problem

⚫ THE WASHING MACHINE WILL NOT BREAK DOWN. Does not drain water, does not spin, makes noise