The set of bolts holding the drum in place may be the first thing you notice when you purchase a new Indesit washing machine. Although these transport bolts are necessary to safeguard the machine during delivery, you cannot use your appliance until you have removed them.
If you leave these bolts in place, your washing machine may sustain serious damage while it is in use. Luckily, taking them out is a quick and easy process that takes only a few minutes.
To help you quickly get your new appliance up and running, we’ll walk you through the process of safely and effectively removing the transport bolts from your Indesit washing machine in this guide.
- Purpose of fasteners
- Where to find these screws?
- Removing the screws: instructions
- If you start the machine with bolts?
- Video on the topic
- What will happen if you do not twist transportation bolts on a washing machine?
- Washing machine – strong vibration.
- What is important to do when installing the Indesit washing machine?
- Transport bolts on a washing machine how to remove
Purpose of fasteners
Washing machines are getting more complicated if other home appliances need to be transported safely in a branded cardboard box with a foam frame. Every washing machine has a drum and a tank that are suspended from the ceiling. They are only secured by a couple of screws and unique springs, which allow the motor shaft to move freely while the machine is operating because they absorb shock. Put simply, the dampers reduce the engine’s speed gain and thus the vibration caused by centrifugal force.
However, there are some challenges when transferring the machine over large distances because of the suspended drum. The tank will actually "jump" with abrupt movements if there isn’t a solid fixation, and the shock absorbers won’t protect it from collisions or additional mechanical damage. The internal moving parts are safely fastened by transport bolts, which shield them from other parts. As a result, the unit’s transportation becomes simple and secure.
Transport bolts secure the tank while it is being transported, shielding it from knocks, vibrations, and damage.
The bolts that are used to move Indesit appear to be ordinary. These are long screws made up of three components: a plastic insert-endor, a rubber intermediate ring, and a metal "spiral." The fasteners, which are custom-made for every model, are the only thing that differs.
Where to find these screws?
The location of the fasteners is easy to understand. Generally speaking, their location is predictable and is determined by the machine type that was purchased. Thus, two possibilities are available:
- if the model is top-loading, then the screws holding the tank are screwed in from the top or from the back;
- if the machine is front-loading, then you need to look for the bolts strictly on the back panel.
The factory instructions contain all the details regarding the location and number of transport bolts on the Indesit washing machine.
The bolts are usually found on the case’s sides, towards the back. However, it is preferable to consult the manufacturer’s instructions to determine the precise location of the bolts rather than wasting time examining the back panel. A comprehensive guide detailing the process for removing the fasteners is also included, complete with helpful tips and explanations. There’s a range in the number of fasteners used, from two to four. Everything is dependent upon the washing machine’s dimensions, capacity, and manufacturer’s policy.
Removing the screws: instructions
It was decided to bring the machine to the apartment. Although it is preferable to take your time, you should connect the unit and begin washing as soon as possible. Let the washing machine "rest" for a few hours at room temperature first. After that, take off the factory stickers and establish unrestricted access to the water supply, sewerage, electricity, and communications. Only after completing all of the aforementioned manipulations do we deal with the transport bolts.
A unique key that is typically included in the kit for any Indesit model is needed to remove the clamps. Find a 12 head or pliers if it isn’t there. Then we behave in this way.
- Loosen the screws by unscrewing them by 3.5-4 cm.
- Push the bolt into the body until it rests against a hard surface (on average, a 2-2.5 cm deepening is enough).
- Without touching the screws themselves, remove the rubber gaskets and the plastic tip.
- Close the vacated holes with special plastic "plugs" that are included with Indesit washing machines. The main thing is to press on the covers until you hear a characteristic click.
A unique key is included with the machine to remove the plastic plugs and transport bolts.
However, take your time discarding the removed transport fasteners. It is preferable to package and keep them with the other documentation and instructions. If you decide to sell or relocate, they will be useful the next time you move the machine. Remember that it is strongly advised against moving machinery without bolts.
If you start the machine with bolts?
It is forbidden to use the washing machine without taking the bolts off. The truth is that these fasteners lock the drum in place, which will unavoidably have disastrous effects when the engine is started. The shock absorbers will take the brunt of the damage first, followed by the bearings and finally the drum and its surroundings. The washing machine’s odds of "survival" decrease with the length of the "cycle."
Regretfully, a lot of people begin washing with them without thinking about the bolts. In this instance, the device starts to indicate an issue by doing the following:
- during washing, rinsing, and especially during spinning, it begins to vibrate strongly;
- the vibration turns into “jumping” around the room;
- noise and a loud rumble join the shaking.
Cleaning without removing the transport bolts is not regarded as a warranty case!
If the machine was turned on despite the fixed drum, you need to forcefully finish the cycle right away. Following that, make sure to invite a specialist from the service center to your house so they can evaluate the state of the washing machine’s internal components. In addition to providing a professional assessment, the master will perform any necessary repairs.
| Step | Description |
| 1 | Unplug the washing machine from the power outlet. |
| 2 | Locate the transport bolts at the back of the machine. |
| 3 | Use a wrench to unscrew each bolt. |
| 4 | Remove the bolts and any washers. |
| 5 | Cover the holes with the provided plastic caps. |
| 6 | Store the bolts for future use, like during a move. |
Knowing how to take out the transport bolts from your Indesit washing machine will help you make sure it runs quietly and efficiently. By taking a few minutes to finish this step, you can prolong the life of your machine and protect its internal components.
In the event that you ever need to move the washing machine again, never forget to keep the transport bolts in a secure location. Later on, this small precaution can save you time and effort.
You’ve taken a crucial first step toward optimizing the performance of your washing machine by adhering to these simple instructions. Savor the peace of mind that comes with knowing your newly installed appliance is ready for use.
The transport bolts holding the drum in place during shipment must be removed in order for your Indesit washing machine to be safely assembled. This tutorial will walk you through the process step-by-step and guarantee that your machine functions as intended.
