Removing the drain hose from the Beko washing machine

One possible cause of improper draining from your Beko washing machine could be a clogged or damaged drain hose. The hose might occasionally need to be taken out for replacement or cleaning. With a little assistance, you can remove the drain hose from a Beko washing machine on your own, even though it might seem like a job best left to the pros.

Make sure everything is safe before you start. To avoid any mishaps or leaks, unplug the washing machine from the electrical outlet and shut off the water supply. Assembling the necessary equipment, like a bucket and a pair of pliers, will also facilitate and expedite the process.

Knowing how to remove the drain hose correctly will help you save time and money, whether you’re dealing with a blocked hose or getting ready to replace one. Without requiring a service call, this easy task can frequently fix minor problems and return your Beko washing machine to operational condition.

A Beko washing machine’s drain hose can be easily removed to help with drainage problems or to get the machine ready for cleaning and maintenance. You can make sure that water flows correctly and stop potential clogs or leaks by following a few easy steps, like unplugging the machine, reaching the back panel, and carefully disconnecting the hose. Whether you’re cleaning the hose or replacing it entirely, this easy do-it-yourself project can maintain your washing machine operating at peak performance.

Removing the old hose

If you need to remove the drain hose, it is much easier to work with the Beko "home helpers" because they lack a bottom. That being said, dismantling does not absolve you from taking safety precautions and adhering strictly to the instructions. Before beginning work, gather several screwdrivers, pliers, and extra towels or rags. To get rid of the troublesome corrugation, carefully adhere to our instructions.

• Disconnect the device from all utilities.
• Use the emergency drain system to get rid of all the waste liquid that remains after the working cycle.
• Move the device away from the wall a few meters so that it is convenient to work with the equipment.
• Lay rags or towels under the equipment.
• Tilt the washing machine so that you have free access to the bottom.

You can place the machine on its right side if you don’t have an assistant who can hold it for you temporarily.

• Find the area where the sleeve connects to the drain pump.
• Loosen the fixing clamp.
• Disconnect the other end of the hose.
• Remove the corrugation from its seat.
• Carefully examine the hose for damage or blockages.
• Remove debris from the sleeve if it is not damaged, and then return either it or a new hose to its place.
• Secure it with a clamp and make sure it is securely fastened.
• Connect it to the body.
• Return the washing machine to the wall.

Ultimately, at this point, all you need to do is perform a test work cycle to ensure the equipment is operating as intended. When checking that the hose’s outer wall is dry during draining, in particular, stay close to the household appliance to ensure that it is operating as intended. You must stop washing right away and tighten the corrugation clamps if you see that water has collected at the pump’s connection point.

Why the old hose failed

The drain hose occasionally breaks down because of the heavy load it is subjected to. Naturally, because it is made of polypropylene, it is consistently shielded from harsh chemicals and abrupt temperature changes, but wear, blockages, and mechanical impacts can cause it to deform. We will go into great detail about the primary causes of corrugation failure.

• Incorrect length. Sometimes the "home assistant" comes with a hose of the wrong length, which is not enough to connect to communications. If in such a situation the user did not buy a new hose, but tried to extend it, then such a design will definitely become unusable over time. That is why it is better not to waste time on such work, but to immediately buy a long hose.
• Damage. Often housewives, through carelessness, provoke damage to the corrugation, for example, when they accidentally install a washing machine or other heavy objects on it. Such careless handling provokes the appearance of problems with tightness.
• Clogs. If the owner of the washing machine has not cleaned the machine and its key parts for a long time, then it may suffer due to a blockage. In this case, debris or scale simply will not allow the drain hose to pass waste liquid into the sewer.

It’s also important to keep in mind that small rodents and pets in private homes have the potential to bite through the corrugation multiple times, if not completely. In this instance, changing the old hose with a new one is always required to fix the issue, regardless of what caused it. Don’t waste time on improvised repairs with electrical tape, glue, or other materials because it is cheap.

It need not be difficult to remove the drain hose from your Beko washing machine. You can do this maintenance task on your own with ease if you have the necessary tools and a little perseverance. Prior to beginning, always make sure the washing machine is disconnected and the water supply is off. By doing this, you can be sure that there won’t be any unplanned leaks or electrical problems.

When disconnecting the hose, don’t forget to have a towel or container close by to collect any possible leaks. To make it easier for you to reattach the hose later, make a note of how it is attached as well. Make sure the new hose you purchase for your Beko washing machine is compatible with the model if you need to replace the old one.

You can maintain the smooth operation of your washing machine by routinely inspecting and replacing the drain hose. It can stop leaks and clogs, which could cause more significant issues. You can prolong the life of your washing machine and maintain a hassle-free laundry routine by performing this easy maintenance.

Video on the topic

How to remove the drain hose of a washing machine

How to connect the drain hose to a Beko dryer?

Replacing the hose on a washing machine

How to replace the drain hose in a washing machine

How to replace the drain hose of a washing machine

How to change the drain hose in a washing machine with your own hands