How to clean a Beko washing machine

Regular cleaning will keep your Beko washing machine operating smoothly and effectively. Dirt, fabric softener, and detergent residue can accumulate inside the machine over time, impairing its functionality and resulting in less fresh clothes than you would want. Thankfully, keeping your washing machine clean is an easy task that can help your appliance last longer.

You can make sure that your Beko washing machine stays in excellent condition by adhering to a few easy steps. Every little task counts—from doing a maintenance wash to cleaning the detergent drawer—and adds up to a big difference. Frequent cleaning avoids potential malfunctions and offensive odors in addition to enhancing the cleanliness of your laundry.

The best ways to clean your Beko washing machine will be demonstrated in this guide, ensuring that it keeps working reliably for many years to come. Regardless of the type of model you’re working with—front-loading or top-loading—these suggestions are simple to implement and very successful.

What elements need to be cleaned?

The washing machine’s interior and exterior still become dirty, even though it is frequently exposed to water and strong household cleaning agents. Simultaneously, even common household cleaning agents have an adverse effect on the internal components of the Beko washing machine, causing soap scum to accumulate on the dispenser and drum and limescale to remain on the hoses and water heating element. In addition, the machine is frequently clogged with dust from the house, pet hair, and lint from clothing.

Professionals recommend giving the washing machine a thorough cleaning at least once every six months.

This explains why the washing machine gets so filthy both indoors and out. The amount of contamination varies, though, so you should inspect the powder receptacle, pump, cuff, drain filter, and tank bottom much more closely. Why take this action?

• Drain filter. This element is often called a trash filter, because it stops about 90% of various debris that gets into the machine. This list includes foreign objects from clothing, hair, threads, wool and much more. The unit must be cleaned at least twice a year.
• Hatch cuff. The rubber seal consists of several folds in which various debris, soap, and waste liquid accumulate. Because of this, the cuff must be wiped dry after each working cycle so that it does not become moldy and does not begin to smell bad and contaminate clothes.
• Pump. In this element, you need to very carefully check the impeller, which collects the remaining 10% of debris after the garbage filter. Often, hair, wool, lint and other contaminants block the movement of the blades, which over time can lead to a breakdown of the pump.
• Detergent receiver. Very often, household chemicals remain in the tray that have not dissolved, but along with dust and plaque, remain to dry. If you do not monitor the receiver, mold can also form in it, spreading an unpleasant odor.
• Bottom of the tank. Finally, you can clean the bottom of the tank, on which sometimes remains debris from the drum, soap, as well as residues of waste liquid. It is not always easy to remove contaminants from the bottom, but this does not mean that they can be ignored.

The list of elements that are most prone to contamination looks exactly like this. Now that you know better than to try to clean the washing machine, you can start with the easiest and work your way up to the hardest tasks. Because cleaning is so easy, you don’t even need to call the repair service experts—you can do it yourself.

Maintaining the cleanliness of your Beko washing machine is crucial to preserving its effectiveness and increasing its lifespan. Frequent cleaning avoids the accumulation of dirt, detergent residue, and limescale, which can cause bad washing outcomes and offensive smells. You can easily clean the drum, detergent drawer, and filter of your machine by following a few easy steps, which will ensure that it stays clean and functions properly for many years to come.

The main "storage" of dirt

The drain filter on the majority of Beko washing machines is located behind the rectangular technical hatch in the lower right corner. Simply pry the hatch open with a screwdriver and push the plastic latches to reveal the waste filter. The next step is to locate the black plug and begin cleaning the element in accordance with the guidelines.

• Be sure to disconnect the "home assistant" from all communications.
• Tilt the body of the washing machine back so that its front legs rise 5-7 centimeters from the floor.
• Place a large basin or bucket under the drain filter to collect the water remaining after the last working cycle.
• Find the emergency drain hose, disconnect it and drain all the liquid into the same container prepared earlier.

These guidelines apply to washing machines that require a specific drain hose. The instructions will be slightly different if your model does not have this kind of hose because you will need to unscrew the garbage filter. The process in this instance will be as follows:

• take hold of the ledge on the plug and twist it from right to left;
• remove the nozzle;
• carefully examine the seat for dirt using a flashlight;
• remove all dirt and debris from there;
• clean the nozzle itself from debris that could stick to it. It is convenient to do this using a powerful stream of hot water from the tap, or by soaking the element in a solution of citric acid;
• install the part in its seat;
• close it with a hatch.

If you wash normally and don’t have any pets, experts advise cleaning the drainage element at least once every three months. It is preferable to clean the filter once a month if there is a dog or cat living there. Lastly, following each wash of woolen items, the unit needs to be cleared of wool.

Dirt in the powder drawer

The powder receptacle is considered a rather dirty place in the washing machine. If it is not cleaned in time, then powder, gel, conditioner and other household chemicals will seriously stick to the walls of the tray over time. At the same time, the longer you do not clean the compartment, the more plaque there will be, which can adversely affect the blockage of the pipe, due to which water with detergents will leave the dispenser worse, lead to leaks and reduce the overall quality of the wash. To prevent this, you should carefully treat the detergent tray after each working cycle. This can be done with citric acid, vinegar or baking soda as follows:

• first, you need to remove the powder receptacle, carefully taking it by the handle;
• then pull it towards you until it stops;
• Click a small lever in the center of the dumplings to remove the block;
• remove a tray that does not prevent anything else from getting out of the seat.

There are situations when severe pressure can be used to remove pollution. However, if the tray hasn’t been cleaned in a while, you’ll need to soak it for a few hours in a solution made of the aforementioned cleaning ingredients. Next, you must completely clean the surfaces with an old toothbrush or sponge to get rid of all the plaque. After that, rinse the tray well and give it a thorough drying. The powder receptacle just needs to be put back in its proper location, inserted into the hole, and pushed all the way in.

The cuff also gets dirty

A lot of dirt, ranging from wool and hair to soap scum and waste liquid, collects in the washing machine’s lower folds, so you should also pay special attention to the rubber seal. It’s best not to leave everything to chance because, in an environment with high humidity and no air conditioning, mold and a bad smell will grow inside the machine very quickly and be difficult to get rid of. What should be done about these outcomes? After every work cycle, it is preferable to remove everything superfluous from the lower folds of the cuff by hand. Periodically cleaning the rubber thoroughly is also worthwhile.

• Open the door of the washing machine hopper.
• Treat each fold of the rubber seal with bleach.
• Close the door.
• Wait about an hour.
• Wash the cuff with your own hands, or activate the idle working cycle with a minimum duration.
• Be sure to wipe the rubber dry.

Using bleach is not required because soda or citric acid solutions also function well. The most crucial thing is to avoid using caustic acids as they may harm the rubber component. To avoid dangerous chemicals getting on your skin and eyes when handling cleaning solutions, wear protective gloves and goggles.

The impeller of the pump is blocked by dirt

Let’s go on to more challenging topics. It is difficult but necessary to allow free access to the pump’s impeller in order to extend the life of the "home assistant." If the home appliance is built-in, you will first need to unplug it from the power source and move it away from the wall or take it out of the kitchen set. then adhere to our guidelines precisely.

• Remove the detergent drawer.
• Unscrew the two screws hidden behind the powder receptacle.
• Loosen the bolts screwed in around the perimeter of the dashboard.
• Disconnect the fee from the case without separating the wires from it, but simply laying it on top of the washer.
• Podge and remove the door of the technical hatch.
• Remove the outer clamp from the rubber seal and carefully tuck it inside the drum.

Removing the cuff entirely is not advised because it is very difficult to reinstall without prior experience.

• Disable the hatch locking device.
• Remove the front panel from the Beko washing machine.
• Drain the waste liquid that may have remained after the last wash.

The drain pump installed below is the only thing left to locate. Take off the clamps holding it in place, unplug the wiring, and carefully rock the element out of the household appliance. You can now thoroughly check the impeller for dirt. Take out any hair, wool, foreign objects, and other debris that may have accumulated inside the device while it was being used actively. After disassembling the pump, make sure to wash the internal components and remove any remaining dirt from the area around the snail and the drainage’s surface.

After the pump has been thoroughly cleaned, assemble it, place it in the seat, and reassemble the washing machine in the order we specify. Avoid attempting to repair an impeller with sealant or glue if it has damage, such as a broken blade that hangs or falls off the shaft. Only a total replacement of the element is allowed in this circumstance.

To keep your Beko washing machine operating smoothly and effectively, cleaning is a must. Frequent maintenance guarantees that your clothes always come out clean and fresh in addition to prolonging the life of your appliance. You can avoid the accumulation of dirt, detergent, and limescale, all of which can impair the functionality of your machine, by following a few easy steps.

Since the detergent drawer and door seal are prone to gathering dirt and residue, start by cleaning these areas. After that, use white vinegar or a descaling agent during an empty hot cycle to remove any remaining odors and limescale. Remember to routinely inspect and clean the filter because accumulated debris can obstruct drainage and produce offensive odors.

You can maintain the best possible condition for your Beko washing machine by including these cleaning duties into your regular routine. This guarantees that your laundry receives the best care possible in addition to preventing expensive repairs. It’s worth the time to do the machine correctly because clean clothes come from a clean machine.

Video on the topic

Cleaning the BEKO 2024 washing machine filter / How to clean your Washing Machine filter BEKO "23

How to clean the filter in a Beko washing machine

How to clean a Beko washing machine?

How to clean the drum of a Beko washing machine?

Do this, and all the dirt will come out of the washing machine, and the wash will not have an unpleasant smell