Although washing machines are designed to last, problems can arise with even the best models over time. The malfunctioning of the drum, which is housed inside a non-separable tank, is one of the most frequent and difficult issues. Non-separable tanks are made as a single, sealed unit as opposed to easily disassembled tanks. Although this design aims to make the machine more durable, it may also complicate repairs.
Many people believe that their only choice when dealing with issues like a damaged drum or a faulty bearing is to replace the entire tank. Nonetheless, you can disassemble a non-separable tank and resolve the problem on your own if you have the necessary tools and a little perseverance. By using this procedure, you can give your washing machine a second lease on life and avoid having to buy a new one.
This guide will walk you through the process of opening a non-separable tank carefully, identifying the issue, and fixing it. This guide will provide you the knowledge and confidence to take on the task, regardless of your level of experience doing things yourself or just wanting to save money on a new one.
| Step | Description |
| 1 | Turn off the washing machine and disconnect it from power. |
| 2 | Remove the top and back panels of the washing machine. |
| 3 | Locate the drum and non-separable tank inside the machine. |
| 4 | Carefully cut the tank along its seam using a saw or sharp tool. |
| 5 | Once opened, take out the drum and other internal components. |
| 6 | Inspect, repair, or replace parts as needed. |
| 7 | Reassemble the tank using strong adhesive or screws, then reattach the panels. |
Dismantling the tank
The steps involved in removing the element from the laundry room will resemble those in various car models. Only in the cases of "front-line" and "verticals" repair will there be a noticeable distinction; in the former, the front wall of the case must be removed, and in the latter, the side portion. In order to remove the tank from the machine gun freely and then split it, get the following tools ready:
- cross and flat screwdrivers;
- screwdriver;
- hacksaw for metal;
- drill with a diameter of 3-5 mm;
- pliers;
- punch;
- set of socket heads;
- ratchet wrench.
In order to properly reassemble the washing machine after repair, it is advisable to take pictures of all disconnected chains and connections while the machine is being disassembled.
The primary phases of the non-separable tank’s removal from the body were as follows:
- de-energize the washing machine;
- close the valve responsible for supplying water to the system;
- disconnect the inlet and drain hoses from the body;
- remove the top cover of the device, to do this, use a screwdriver or screwdriver to unscrew the mounting screws;
- remove the detergent tray from the system;
- unscrew the bolts holding the main control panel. You should not completely disconnect it from the body, it is enough to put the part on top of the washing machine;
- loosen the clamp holding the cuff of the hatch door. Pull out the ring and tuck the sealing rubber into the drum of the machine;
- unscrew the 2 screws holding the hatch locking device, pull out the UBL, having previously disconnected the power wiring;
- unscrew the remaining screws holding the front wall of the case, remove it and put it aside;
- dismantle the back wall, to do this, unscrew all the mounting bolts;
- disconnect the wires from the heating element, loosen the main nut and pull the heating element out of the socket;
- remove the counterweights adjacent to the tank;
- remove the drive belt from the pulley, unfasten the power wiring of the electric motor.
You can proceed to loosen the shock absorbers after disconnecting all of the parts and components from the tank. Remove the tank by unscrewing the suspension spring fasteners. For additional do-it-yourself repairs, carefully take out the non-separable structure from the case and set it on a level surface.
Stages of work
Collapsible tanks are not financially viable for home appliance manufacturers to produce. Monolithic structures don’t have extra bolts or fasteners, and most users will spend a lot of money replacing an entire tank if the same bearing breaks. Few people are aware that it is possible to "defeat" a washing machine with a non-separable tank by splitting the cast part in half and getting inside. The following are detailed instructions for disassembling the tank in order to replace the bearings.
- Mark and drill holes on the surface of the plastic housing.
- Carefully cut the tank along the marked line.
- Remove the drum.
- Using a punch or a special key, knock out the bearings, install new ones in their place.
- Change the oil seal.
- Assemble in reverse order.
The overall plan is very straightforward. We will, however, go over each step in greater detail because the work will be labor-intensive and delicate.
Disassembling a washing machine’s non-separable tank may seem difficult at first, but it is absolutely possible to accomplish with the right patience and strategy. You can reach internal components that would otherwise be out of reach by carefully following the instructions and taking your time.
Although this method can save you money by avoiding the need to purchase a new machine or pay for an expensive repair, it is important to keep in mind that it does require a steady hand and some basic tools. In addition, you’ll feel good about yourself for overcoming the obstacle and extending the life of your washing machine.
Even though not every do-it-yourself enthusiast feels capable of tackling the project, those who do will discover that the procedure gets easier to handle with each step. Just remember to take safety precautions, work in a well-lit, orderly area, and keep track of all the screws and parts.
In the end, disassembling a non-separable tank is a great way to learn more about your washing machine’s operation in addition to solving a problem. Who knows? The next time your machine needs some maintenance, having this knowledge may come in handy.
While disassembling a washing machine’s non-separable tank may seem difficult, it’s a manageable task that can prevent expensive repairs or the need to purchase a new appliance. Even though your washing machine wasn’t meant to be disassembled, this guide will walk you through the process step-by-step and provide helpful hints and insights to help you safely open, repair, and reassemble the tank. Whether your problem is a damaged drum, clogged parts, or you simply want to give your machine a thorough cleaning, this article will provide you the confidence to take on the task.
