Removing the drum of the Indesit washing machine

Every owner of a washing machine may eventually need to remove the drum for maintenance or replacement. This task may seem difficult if you own an Indesit washing machine, but even someone with no experience repairing appliances can handle it with the right help.

The washing machine’s drum is an important component, and keeping it functional requires that you remove it properly. Time and money can be saved by learning how to remove the drum safely and effectively, regardless of the problem—noisy spin cycle, unusual vibrations, or other.

We’ll take you step-by-step through the procedure in this post so that you can be confident and knowledgeable enough to remove the drum from your Indesit washing machine without breaking anything.

Let"s prepare carefully for work

A universal set of tools is kept in almost every home or apartment and is occasionally used for small household tasks. We’re talking about tools like pliers, side cutters, hex keys, screwdrivers with different sized and kind of attachments, and hammers. Apart from the instruments mentioned, it is imperative that you have a metal hacksaw ready.

Before disassembling the washing machine, do not buy replacement parts ahead of time because their markings may be off. It will be far more appropriate and sensible to take them out before purchasing a replacement.

Once you’ve chosen every tool required for the task, you should begin setting up the machine. Since the upcoming repair process is going to take a while, it would be best to set up a fully functional workspace where nothing will get in the way of the necessary adjustments. It is advisable to move the washing machine to a large room, such as a garage, as this will offer the most comfortable repair environment.

If moving the washing machine to a free non-residential space is not an option, clear a few square meters of space in the room, cover the floor with cloth, and move the machine and its accessories to an area that is equipped. Once the workspace is fully prepared, you can start fixing things.

The first stage of disassembly

You need to unplug the Indesit machine from the power source before you start disassembling it. After washing the bottom of the tank, you should drain any water that might still be there. This can be accomplished by taking a container the necessary size, putting it beneath the machine body, and then gradually draining the water while separating the garbage filter first. The removed filter needs to be carefully cleaned, dried, and set aside. Only after all the work is finished should it be replaced.

Crucial! It will be easier to correctly assemble the washing machine after the repair is finished if you take pictures of the steps you take when disconnecting wires or small parts of the unit.

Therefore, follow these steps to remove the drum from the Indesit washing machine.

1. Remove the top cover of the case, to do this, unscrew the bolts located on the back wall of the washing machine body. A simple tip will help you to make the removal easier: first, the cover should be moved back, and then pulled up.
2. Unscrew all the bolts on the back wall of the case. Unfasten the cover and put it aside.
3. You will see the part of the drum located outside. Also in front of you will be the drive mechanism of the machine, namely the pulley with the working belt and the engine. You should immediately disconnect the belt. Having seen rusty streaks coming out of the central point of the tank, you can safely state that the seal is broken and the bearings are out of order.
4. Proceed to disconnect all cables and wires that are attached to the drum. We are talking about the power supply of the heating element (TEN), the temperature sensor. Be sure to unscrew the bolts used to secure the washing machine motor.
5. Unscrew the heater mounting nut, then, with gentle rocking movements, remove the part.
6. Remove the counterweight. It is located on top of the unit, you will certainly see it after disconnecting the top cover. This part is quite large and is necessary to prevent the machine from “jumping” during spinning. To remove this element, prepare a hex key of the appropriate size and unscrew all the parts used to secure the counterweight.
7. Disconnect the wires and hose leading to the pressure switch from it. After that, carefully remove the part from the appliance.
8. Remove the tray used for loading detergents. Then loosen the clamps of the pipes directed to the powder receptacle, remove them and remove the dispenser hopper.
9. Slowly lower the washing machine to the right side, look under its bottom. If the bottom is missing – great, when there is a bottom, you will have to unscrew it. Unscrew the screws located on different sides of the dust filter. Then push the snail in which the filter is placed into the body of the appliance.
10. Remove the chip with the wires from the pump. After this, you will have to loosen the clamps and remove all the pipes from the surface of the pump. Having finished this, you can remove the pump itself.
11. Carefully pull out the machine"s motor, to do this, lower the part slightly back and pull it down.
12. Unscrew the shock absorbers supporting the tank from below.

This concludes the washing machine’s initial disassembly step. Consequently, you will have unrestricted access to them and be able to release the tank using a drum. You are now able to move on to the next task.

Although removing the drum from an Indesit washing machine can appear difficult, it is a task that can be completed with the correct techniques. You can finish the task efficiently if you comprehend the procedure and take your time.

You can safely disassemble the machine and get to the drum without breaking anything by following the instructions. Not only does this knowledge aid in repairs, but it also reduces potential expenses.

Since the drum is one of the most important parts of your washing machine, remember to keep track of all the parts and handle it carefully. You can prolong the life of your appliance by carefully removing and reinstalling the drum with patience and attention to detail.

Disassembling multiple crucial parts necessitates meticulous attention to detail when removing the drum from an Indesit washing machine. In order to access and repair internal components such as the spider arm or bearings, this procedure is essential. You can successfully remove the drum from your washing machine and maintain optimal operating condition by following the correct procedures and handling parts with caution.

Video on the topic

Drum disassembly indesit wisn80

Replacing bearings in an Indesit washing machine with a glued tank

Drum disassembly and replacement on an Indesit IWSD5085

HOW TO UNSCREW THE DRUM PULLEY ON AN INDESIT, ARISTON WASHING MACHINE!