The plug of the washing machine has melted

It can be concerning to find that your washing machine’s plug has melted. It’s an indication that something is seriously wrong, and in order to stop additional harm or potential dangers, the problem needs to be addressed right away.

There are multiple reasons why a plug from a washing machine could melt. It might be the result of overloading the machine, a loose connection, or an electrical malfunction. The first step in fixing the issue and making sure your appliance is safe to use is figuring out what caused it.

This post will discuss the potential reasons for a melted plug, how to fix it, and precautions you can take to keep it from happening in the future. You can maintain the safety and smooth operation of your washing machine by acting quickly.

Replacing a melted plug

The fused body of the electric plug and an unpleasant burning smell are signs that it needs to be repaired. How should you proceed if damage is evident? The plug needs to be changed. Continuing to operate the machine with such a plug is extremely risky.

You must have pliers, a thin screwdriver, and a sharp knife on hand when changing the electric plug.

When changing a plug, you ought to:

• cut off the old plug from the cord;
• use a knife to remove the top insulating layer from the cable;
• stripping each wire;
• twist the wires and cut them so that the length of the uninsulated section of the cable is 10 mm;
• bend the ends of the wires with pliers;
• inspect each internal core. Usually, the washing machine"s power cord has three wires: neutral (bluish or light blue), ground (yellow or green) and phase (can be black, brown or pinkish);
• connect the wires to a working plug according to the diagram. Grounding is connected to the central contact;
• clamp the cord with a special plastic jumper to securely fasten it to the seat;
• assemble the body of the electrical plug, connecting its halves with a screw.

You can see that it’s simple to change the plug. It’s critical to connect the wires according to the directions exactly and to avoid mixing up the contacts. Otherwise, no specialized training or equipment are needed.

Your washing machine’s melted plug is an obvious indication that there is an electrical problem that needs to be fixed right away. This might be the result of using an incompatible extension cord, bad wiring, or overheating. It’s imperative to take quick action to fix the issue in order to stop additional damage or even a fire hazard.

For fans of Soviet plugs

The Euro plug is a standard feature on modern washing machines. Installing such an element at your own risk is possible if it has melted and all you have at home is a Soviet-style plug. The process is essentially the same as the preceding algorithm:

• cut off the faulty plug;
• remove a couple of centimeters of outer insulation from the cord;
• stripping each wire with a knife, trimming the length with scissors;
• using pliers, make a ring at the end of each core;
• connect the neutral wire and phase to the contacts of the new plug. Soviet-style plugs do not provide for grounding, so the third, yellow-green cable of the cord can be cut off.

The next thing to do is to make sure the wires are fastened firmly. If so, the central screw needs to be inserted to complete the body part assembly. It is advised to keep an eye on the washing machine’s operation for a while after changing the plug.

Discover why even a brand-new plug starts to melt and de-energize the outlet right away if you smell burning.

Checking the power cord

There are instances where a short circuit has caused the plug to melt. If changing the plug doesn’t solve the problem and the new one deteriorates as well, you should look for damage to the power cord. Check the washing machine cable first to see if it has any cracks, clamps, kinks, or burn marks.

Using a multimeter is the simplest method of inspecting an automatic machine’s power cord. If a breakdown does occur, it will be quickly identified by a specialized device. How should I go about running diagnostics? Turn on the buzzer mode on the tester and ring the washing machine cable. The multimeter will begin to loudly beep if it detects an electric current leak. In this instance, changing the power cord is the only way to fix the machine.

You can build a homemade tool and use it to test the cord if you don’t want to purchase a multimeter to diagnose it. All you’ll need is a battery, two connecting wires, a connector, and a 3.5V lightbulb. The layout is put together in a specific order:

• a lamp is connected to the positive contact of the battery;
• a wire with a clamp is brought to the negative.

It is preferable to check the homemade gadget on the power cord’s operational section first. At any time, you should hook the clamp. The lamp will turn on if the assembly is correct and the cable cores are receiving current. In the event that the LED remains dark, a circuit break may exist.

Although dealing with a melted plug on your washing machine can be unsettling, it’s imperative to take immediate action to guarantee safety. A melted plug is frequently a sign of an electrical issue, like an overloading socket or a short circuit. Ignoring it might result in more serious harm or possibly a fire hazard.

It is imperative that you unplug the machine and look for any obvious damage on the plug and outlet. To minimize risks, it could be advisable to seek advice from a qualified electrician if you’re not sure what’s causing the issue. You can help avoid future problems like this by routinely inspecting the plug and outlet on your washing machine.

You can maintain the safety and efficiency of your washing machine and lessen the possibility of future problems by acting quickly and being aware of the warning signs.

Video on the topic

How to properly replace an electric plug.

Why do plugs burn out.Causes and how to fix them.

Many houses have burned down because of this.. Why does a plug or socket get hot

Do I need to pull the plug out of the socket in washing machines?