Although it may seem difficult, changing the heating element in a top-loading washing machine is completely possible with the correct instructions. The heating element in your washing machine probably needs to be changed if the water isn’t heating up enough or at all. This part is necessary for the washer to clean your clothes efficiently, especially when using the hot water cycle.
It’s crucial to comprehend the fundamentals of what you’re working with before you start. It usually sits close to the bottom of the machine, and to get to it, you’ll need to disassemble it. But don’t worry, you can quickly get your washing machine back to normal with a few simple tools and some perseverance.
You can install a new heating element and safely remove the old one by following the instructions in this guide. Regardless of your level of experience, DIYers will find the instructions to be easy to follow and understand.
A top-loading washing machine’s heating element can be easily replaced by unplugging the unit, opening the back panel to access the element, and carefully removing and swapping out the damaged component. You can guarantee that your clothes are washed efficiently by regaining your washing machine’s capacity to heat water by following the correct procedures.
- How to inspect the heating element?
- How to replace the part?
- Video on the topic
- How to replace the heating element on an Indesit and Ariston washing machine yourself?
- How to get coins and see the condition of the heating element in the machine – automatic, without disassembling ?
- Replacing the heating element of the Zanussi washing machine
- Replacing the heating element on the Electrolux ews 106410w washing machine
- How to replace the heating element in a Whirlpool washing machine with a vertical load
- Replacing the heating element of the Hotpoint Ariston ARTL 837 washing machine
- How to extract and replace the heating element in a washing machine if it does not come out 🛠 (extract TEN).
How to inspect the heating element?
It’s very simple to determine the state of your "vertical"’sheatingelement. It is not even necessary to disassemble the washing machine’s body. We will demonstrate the process of quickly inspecting the heating element by using a Whirlpool machine as an example. Lifting the top cover and opening the drum flaps is the first step. The bottom of the machine has an inspection window that allows you to see the heating element by peering "inside." It is more convenient to work with the hopper closed and turned so that our "hatch" is on top.
Use a slotted screwdriver to "arm yourself" and open the inspection window. On the side, there is a plug that needs to be shifted to the right. After that, the plastic "flap" will slide away, the latches will function, and the grooves will leap off. Allow it to drop into the drum; you don’t need to hold it. Now that the window is open, all that needs to be done is turn the drum around one more, lift the flaps, and remove the fallen plug. Through the holes, you can now evaluate the heating element’s condition. Equip yourself with a flashlight if needed.
By looking through the inspection window, you can determine whether the tubular heater has carbon deposits or scale buildup. It is preferable to take the heating element apart and inspect it if it is in "deplorable" condition. Finding the side wall of the "vertical" to remove in order to access the heater contacts is very simple; just make sure to look through the inspection window. Which side the wiring and mounting screw are on will be visible.
How to replace the part?
Make sure to de-energize the automatic machine and turn off the tap that controls the water supply before beginning to replace the heating element. The washing machine can then be moved to the middle of the space so that using it is more convenient. The next step is to remove the case’s side wall, which can be done by simply unscrewing a few bolts that are positioned all the way around the case. The following will be the subsequent action algorithm:
- find the location of the heating element – the "nest" is at the very bottom;
- remove the wiring. Before this, it is better to take a photo of how the chips are connected so as not to get confused during reassembly;
- disconnect the temperature sensor chip from the heater;
- unscrew the central nut securing the heating element;
- remove the heating element from the "nest".
If the heating element resists, try using a screwdriver to pry it from its position and pry the heater along its edges.
It is necessary to remove the sealing cuff and the heating element simultaneously. Use dish soap on the rubber if it has "dried up" and isn’t going to "go." The product will aid in the gasket’s softening. It is best to clean the seat right away from dirt, debris, and scale fragments after disassembling the heater. This can be accomplished by looking through the inspection window’s holes. Once the "cleaning" is complete, it’s worthwhile to begin installing a new, functional heating element.
If the heater had a thermostat, take it out of the old component and put it in the new heating element’s hole. After that, you can fit the element into the socket and use a wrench to tighten the center nut. Reattach the ground wire, temperature sensor plug, and all of the contacts. In this manner, the "vertical’s" heater can be replaced. The case just needs to be put together, and a test high-temperature wash should be performed. This will guarantee that the temperature is raised.
| Step | Description |
| 1 | Unplug the washing machine and remove the back panel. |
| 2 | Locate the heating element near the bottom of the drum. |
| 3 | Disconnect the wires connected to the heating element. |
| 4 | Unscrew and remove the old heating element. |
| 5 | Install the new heating element and secure it in place. |
| 6 | Reconnect the wires to the new heating element. |
| 7 | Replace the back panel and plug in the washing machine. |
| 8 | Test the washing machine to ensure the new heating element works properly. |
With a little perseverance and the appropriate equipment, replacing the heating element in a top-loading washing machine is a job that many people can complete. You can prolong the life of your appliance and reduce repair costs by carefully following the steps.
Prior to beginning any repairs, make sure the washing machine is always turned off from the power source. By doing this, you can be sure that no unintentional electrical problems will arise.
Perform a test cycle after installing the new heating element to make sure everything is operating as it should. You’ve finished the replacement successfully if the water heats up as predicted.
Your washing machine can continue to operate effectively for many years with routine maintenance, which includes inspecting and replacing worn-out components like the heating element.
