Types and types of drain hoses for washing machines: Instructions + Video

The drain hose is essential to maintaining the efficiency of your washing machine. This frequently disregarded part makes sure that water is effectively removed from your washing machine at the end of each cycle. Your laundry routine may benefit greatly from knowing the various kinds of drain hoses and how to select the best one.

We’ll examine the different kinds of drain hoses for washing machines in this post. We’ll go over every detail, including the materials they’re made of, their sizes, and their compatibility. We’ll also provide you a helpful video and step-by-step instructions to help you choose and install the ideal hose for your needs.

Understanding your options will enable you to make the best decision for effective and trouble-free washing, whether you’re installing a new washing machine or replacing an outdated hose. Let’s investigate the various varieties and select the one that best suits your configuration!

Types of washing machine hoses

Hoses typically fall into one of the following categories:

1) Conventional. This kind has a set length that ranges from one to five meters. Join multiple tubes together to extend.

2. Telescoping. When stretched, its length can reach two meters, and its diameter can reach sixty centimeters. It comes pre-assembled and compressed for sale. It can create blockages when the water flows because of its strong vibrations. When making your decision, keep this drawback in mind. It can also shatter if it is stretched too much.

3) A coil of hose. It is very useful and convenient to use. It features notches so you can adjust the length on your own. Normally, the hose is up to 50 cm long. It is not advised to use it as a drain, though. Blockages are also a significant risk.

4) Drain pipe. Very common. polypropylene-based. It effectively eliminates tainted liquids. Its ends have fittings that measure 19 or 22 cm in diameter. The pipe’s fittings at either end may have the same diameter or a different one. This facilitates the process of connecting to the sewer and washing machine.

Recall! Consider the type of hose in addition to its length and diameter when selecting a drain hose.

Models of drain hoses

  • – Connect to a siphon. Installation occurs through a threaded connection.
  • – Connect to a separate branch on the sewer pipe through sealing cuffs.
  • – Without connection to the sewer. Have a bend at the end for attaching to a bathtub, sink or toilet to drain water there.

Crucial! Although inconvenient, the third kind of hoses is necessary if the sewer system isn’t functioning well.

Hose and sewer pipe diameters

The sewer pipe to which the hose is attached typically has a diameter of 40, 50, 90, or 110 mm. PET pipes have a thinner wall thickness and a smaller diameter. In most cases, the wall thickness is 3 mm when the diameter is 40–50 mm and 5 mm when it is 90–110 mm.

Washing machine hoses have internal diameters ranging from 16 to 63 mm. The majority of manufacturers offer drain hoses with an external diameter of 22 mm and an internal diameter of 19 mm. There are also hoses with a 25 mm diameter; some LG models are among them.

There are fastening fittings with a diameter of 19 or 22 mm at the ends of the hose. A diameter of 29 mm is used on older Indesit washers, but other washing machines hardly ever use this size.

Leading producers of drain hoses

  • The Russian company Helfer produces hoses that can withstand pressure up to 10 Bar and temperatures up to 60 degrees. Fittings 19 mm.
  • The Italian company "Parigi" Nylonflex produces high-strength hoses that can withstand pressure up to 10 Bar and temperature differences from -5 to +70 degrees.
  • Italian TSL hoses can withstand pressure of 5 Bar and have fittings 19 * 22 mm. Suitable for washing machines Ariston, Electrolux, Zanussi, Bosch and Whirlpool.
  • The company "EvciPlastic" produces corrugated hoses with an operating temperature from -5 to +60 degrees, a maximum pressure of 3 Bar, footage up to 50 m and a diameter of 16 up to 63 mm.

1.5 to 3.5 meter hoses with a maximum pressure of 2 Bar are produced by the Russian company TuboFlex. Compatible with Samsung, Beko, Atlant, and Indesit washing machines.

It is essential to select the appropriate drain hose for your washing machine in order to ensure effective water flow and prevent leaks. This post will discuss the different kinds of drain hoses that are available, offer helpful installation advice, and include a video tutorial to make the process go as smoothly as possible. Knowing your options will help ensure the best possible performance and longevity of your washing system, whether you’re installing a new machine or replacing an outdated hose.

Features of choosing and measuring hoses

  • – take measurements as accurately as possible, but without tension and rounding down;
  • – do not buy hoses much longer than necessary (the longer the hose, the more actively the pump works, and therefore wears out);
  • – the hose should not be stretched or with strong kinks;
  • – it is not recommended to buy a hose longer than 3.5 m;

  • – think over the connection of the hoses to each other (sometimes a connecting tube is used, for which you need to buy a clamp in a car store);
  • – if the washing machine has a non-standard fitting, then you will have to order it from the manufacturer or increase the length;
  • – the diameter of the inlet and outlet pipes is usually standard and is ¾ inches, which makes the choice easier;
  • – find the place where the hose is attached to your washing machine before buying;

Note: The drain system is under the front panel of Siemens, Bosc, and AEG washing machines. It is typically located on the device’s back wall according to other manufacturers.

  • – pay attention to the heat resistance of the hose (optimal temperature up to 90 degrees) and the marking with the maximum allowable pressure (2 Bar is enough for an apartment, but for a private house you need to take more);

Crucial! Remember to inspect the hose’s completeness and state. It’s easier to buy everything at once than to dash to the store afterwards.

Type Description
Standard Drain Hose Typical hose that comes with most washing machines, made of flexible plastic. Suitable for most home installations.
Extended Drain Hose Longer hose for connecting to distant drainage points. Often used if the standard hose is too short.
Anti-Kink Drain Hose Designed to prevent kinking and ensure smooth water flow. Ideal for tight or challenging installation spaces.
Heavy-Duty Drain Hose Sturdier hose made for commercial or high-use settings. More resistant to wear and tear.
Flexible Drain Hose Highly flexible, allows for easier installation in awkward spaces. Can be bent without damaging the hose.
Drain Hose with Integrated Pump Includes a built-in pump for higher water discharge. Useful if the drainage point is higher than the washing machine.

Selecting the appropriate drain hose for your washing machine is essential to keeping it operating at peak efficiency and preventing leaks. Knowing the various kinds of drain hoses that are available—like standard, extension, and flexible options—will help you choose the one that best suits your requirements and configuration. Depending on the washing machine model and installation space, each type has advantages of its own.

To guarantee a tight fit and appropriate drainage, carefully follow the installation instructions. Water backup and leaks are frequent problems that can be avoided with a properly installed drain hose. With the help of our video guide, which offers detailed instructions, you can better understand the procedure and find the task less difficult.

Choosing the appropriate hose and installing it properly will ultimately result in your washing machine operating more smoothly and lasting longer. To achieve the best results, feel free to explore our video and comprehensive instructions. Please get in touch if you need help or if you have any more questions!

Video on the topic

Height of the washing machine drain into the sewer. Correct placement of the hose

How to connect a washing machine / Connect a washing machine without a plumber

Correct connection of the washing machine drain. Siphon effect. Siphon with a check valve.

How often do you conduct maintenance of your washing machine (cleaning filters, drum, and t.d.)?
Share to friends
Ekaterina Vasilieva

Consultant on choosing household appliances. Working in a hardware store, I helped many customers choose washing machines that perfectly suited their needs. In my articles, I share recommendations and personal life hacks for choosing and using, so that it is easier for you to make a decision.

Rate author
FAQ-Washer.com
Add a comment