Dismantling the Candy washing machine tank

Although disassembling a Candy washing machine tank may seem difficult, it is completely possible to accomplish with the correct methods and equipment. Disassembling the tank is an essential first step in performing repairs or learning about the inner workings of your washing machine, regardless of whether you have a broken drum, a bad bearing, or are just inquisitive about how it operates.

We’ll walk you through the procedure step-by-step in this post so that even readers with no prior experience can follow along. You will discover what equipment is required, how to take safety measures, and how to safely and effectively disassemble the tank.

After reading this guide, you’ll be confident enough to handle this project by yourself, saving money on repairs and gaining insightful knowledge about the workings of your washing machine.

Is such a repair available?

The washing machine’s drum rotates smoothly and softly because of the bearing unit. The rings are prone to natural wear, though, because they are continually under increased load. The washing machine will begin to knock and make noise while operating, especially when it is in the spin stage, if the bearings break.

On the drum cover are the bearings. Not only must you remove the main tank from the machine body, but you also have to cut it in half in order to reach them. The issue is that non-separable tanks are a feature of the majority of Candy washing machines.

As a result, extracting the tank from the body won’t be the most challenging task. A "cast" plastic tank is far more difficult to disassemble. Workshops and repair facilities offer to replace the entire unit in such a case, but the price of such repairs can approach seventy percent of that of a brand-new washing machine.

A non-separable tank can even be cut in half and then reassembled at home without losing its tightness.

Thus, you can try using a hacksaw to cut the tank in half, replace the bearings, and then glue the plastic container back together if you don’t want to spend money on pricey repairs. You could save a ton of money, but you should be aware that this kind of work takes a lot of effort, endurance, and skill.

What tools do you need to get hold of?

It’s time to get ready for the impending repair. It is preferable to gather everything you need right away so that you are not sidetracked from the task by looking for tools. Thus, you ought to possess:

• hacksaw for metal or grinder;
• pliers;
• marker;
• open-end wrenches of different sizes (from 8 to 18 mm);
• Phillips and slotted screwdrivers;
• set of heads with ratchets;
• hammer;
• punch;
• awl;
• drill.

Purchasing spare parts as soon as possible is also preferable. You should pay close attention to the Candy washing machine’s model and serial number when choosing parts. This brand’s automatic machines typically have one oil seal and two bearings.

Where will we repair?

It is crucial that you give yourself a comfortable workspace. There should be plenty of room because the machine will need to be disassembled almost entirely. Move the washing machine to a garage or workshop, if possible. If this isn’t feasible, relocate the machine to a space that is two to three square meters empty.

Prior to moving the washing machine:

• disconnect the appliance from the power supply by pulling the power cord out of the socket;
• unhook the drain and inlet hoses from the machine.

The work area should then be ready; cover it with cloth or newspapers. Next, relocate the device to this location. After that, take the powder container out of the washing machine and set the tray down. The washing machine’s remaining water must be drained in the following step. To carry out this:

• place a low container under the machine, in the place where the "trash can" is located;
• start gradually unscrewing the drain filter;
• wait until the water drains into the container;
• wash the drain filter in warm water.

It’s also a good idea to plan ahead for the placement of small components like screws, latches, and clamps. It is best to set aside space for detachable components right away; you can place the garbage filter and powder container there. Following that, the washing machine starts to be disassembled.

We try to "get close" to the tank of the machine

The machine must be disassembled, which is the next and longer step. You must unhook all of the pipes, wires, and components from the tank before removing it from the housing. The following will be the algorithm:

• remove the cover of the washing machine housing – to do this, unscrew the bolts holding the "top", then pull it towards you and up;
• remove the technical hatch (the panel is located on the back wall of the housing);
• unscrew the inlet valve mount and pull the element out;
• disconnect the pipe and take out the niche of the powder receptacle;
• unscrew the bolts holding the "dashboard";
• reset the contacts connected to the dashboard (after photographing the connection diagram),
• having dealt with the latches, disconnect the dashboard from the housing and put it aside;
• remove the outer compression clamp of the drum cuff, to do this, hook its mount with a screwdriver;
• tuck the rubber cuff inside the machine;
• disconnect the UBL contacts;
• remove the front and back walls of the case, having previously removed the fixing screws;
• pull the drive belt off the pulley.

You now have to examine the rear surface of the tank very carefully. It’s definitely time to replace the seal and bearings if rusty streaks "come out" from the center. Proceed to disassemble:

• find the heating element, disconnect all contacts from it;
• unscrew the heater nut;
• pull the heating element out of the groove;
• drop the plugs and electrical wiring from the engine;
• unscrew the bolts holding the motor and remove the motor from the housing.

You will now need to operate the machine’s upper portion. The counterweight is the next in line. Its purpose is to reduce the centrifugal force generated when the washing machine operates. It appears that the weight is a big, flat stone.

A socket wrench is needed to remove the counterweight. It is required to remove the bolts holding the concrete block in place. You can set the weight aside.

When disassembling the counterweight, exercise caution because it is fairly heavy.

It is also required to take the water level sensor apart. First, unhook the element from the mount and disconnect the wiring from the pressure switch. It’s crucial to proceed cautiously to avoid breaking the plastic retainer.

The washing machine must then be carefully placed on its right side. The majority of Candy models lack a bottom. Take out the tray if it is present.

The drain pipe and pump are the next in line. Loosening the clamp makes it very simple to disconnect the hose. Once the fixing bolts are removed, the pump is also taken out of the housing.

Lastly, you must unplug the shock absorbers from the fuel tank. Loosen the screws holding the racks in place. Take out the dampers. You can then stack the washing machine upright once more.

How to properly cut the Candy machine tank?

The unit needs to be taken out of the machine first because the plastic tank is cut outside the housing. It is best to remove the container with two people because doing this alone is difficult. As a result, assign someone to help with the task.

Lay the tank on the ground after that. Verify if the design is indeed non-separable. In this instance, there won’t be any bolts or nuts along the seam because the container’s halves will be soldered together.

A metal hacksaw or grinder is used to cut a plastic tank.

It is important to cut precisely along the welds. Position the tank vertically before cutting it. Additionally, you must drill 5–6 holes on the center edge, spaced 6-7 cm apart. Screws will be inserted during reverse assembly to increase the structural reliability.

Remove the top half of the tank after cutting. Bearings and the drum are at the bottom. Moreover, the work will accompany it.

Although taking apart the Candy washing machine’s tank can appear difficult, it is doable with the correct equipment and a methodical approach. You can access the internal components without harming the machine if you carefully follow each step.

Always take your time and make sure you record the number of screws and parts you remove. Correctly reassembling everything is equally crucial as the disassembly procedure. You can avoid possible problems by reading the machine’s manual or getting expert assistance if you’re unsure at any time.

You can confidently handle repairs or replacements if you know how the tank is made and how to disassemble it correctly. Regardless of whether you’re trying to fix a problem or just want to clean the tank,

You must carefully remove the top and back panels, disconnect the hoses and wires, and separate the tank from the drum in order to disassemble the Candy washing machine’s tank. Patience and meticulous attention to detail are necessary for this task because careless handling could harm the machine or its parts.

Video on the topic

09 06 22 Repair of the tank from the Candy Washing machine Replacing bearings at home

Replacing bearings in Candy washing machine

Repair of indifferent tanks

How to replace bearings in a non -vegetable tank?

Disassembling a Candy Smart 5kg washing machine Replacing bearings

STRANGE WASHING MACHINE 🤪 Candy washing machine repair