How to remove the transport bolts on a Haier washing machine

One of the first things you should do after purchasing a new Haier washing machine is to take out the transport bolts. These bolts are meant to hold the drum in place during shipment, but they could seriously harm the machine if you leave them in place before operating it.

It’s not necessary to have any specialized tools or skills to remove these bolts, but it’s crucial to do it correctly to guarantee your washing machine functions as intended. We’ll walk you through the process of securely removing the transport bolts from your Haier washing machine in this guide.

For the best performance and protection of your washing machine, whether you’re moving it to a new place or setting it up for the first time, you must know how to remove these bolts.

Finding fasteners

The quickest and easiest part of the entire disassembly process is finding the fasteners. In Haier washing machines, they are typically concealed in the following areas:

• either on the back wall of the device, if it is a front-loading machine;
• or on top or behind, if we are talking about vertical washing machines.

If you are still unable to locate the transport bolts, consult the machine’s official instructions, as the manufacturer provides precise information about the location and quantity of fasteners.

Basically, the instructions will include an image showing the location of the parts and instructions for placing the bolts on the device’s sides and back. Advice on the best way to remove the fasteners may also be found in the manual. Four transport screws are typically found on Haier washing machines.

Removing the desired screws

Now that the equipment has been delivered safely and undamaged, it is appropriate to let it sit for a few hours until it comes to room temperature. You can lay out a level surface for the machine or connect it to the electrical and water networks during this time. Once the Haier washing machine is prepared for connection, the shipping bolts and factory stickers must be taken off.

• Loosen each shipping screw by unscrewing them by 3-4 centimeters, for which you need a special key for removing the clamps, which is included with the washing machine.

If you don’t have one of these tools, pliers or a 12-headed key will work just fine.

• Next, you need to push the screws into the body until they hit a hard surface. Most often, a recess of several centimeters is enough for this.
• Now the attachments can be pulled out along with the screws.
• In the holes that appear, you need to install special plugs, which are supplied with the Haier washing machine. It is important to install them until they click.

For safe shipping, the manufacturers advise storing the plugs with the machine’s paperwork and receipt instead of discarding them. This is because, in the event that you move, sell the washing machine, or take it in for repair, they might be needed for additional transportation. It is advised to never move washing machines without transport bolts in order to prevent malfunctions.

Locate the bolts at the back of the Haier washing machine in order to begin removing the transport bolts. To prevent damage, these bolts that hold the drum in place during transit must be taken out before operating the machine. To unscrew them, you’ll need a wrench. Once they’re out, be sure to save the bolts in case you ever need to move the machine again. It only takes a few minutes and is crucial to remove these bolts to make sure your washing machine functions correctly.

What is fraught with transporting a washing machine without bolts?

We discovered that while the equipment can be harmed during transportation without bolts, the device is harmed even more during washing when bolts are installed. Since the tank is fixed firmly, the machine will damage the tank if you start it while it is in this condition because the motor will start spinning the drum vigorously. Many other internal components of the "home assistant," including the shock absorbers and bearing unit, will also deteriorate and need to be either repaired or replaced entirely.

People frequently forget about the transport screws because they are eager to try out a new purchase. Every additional minute of this kind of labor will lessen the likelihood that the washing machine will operate normally in the future if you start it with the clamps on. As a result, pay close attention to the device during the initial wash because it may indicate an issue in the following ways:

• if the bolts have not been removed, the machine will vibrate very strongly. The vibration will become even stronger during the spin cycle;
• the equipment will literally jump around the room;
• it will also make particularly loud sounds, creak and rumble.

You will not be eligible for a warranty if the Haier washing machine malfunctions because the bolts are left in place.

To lessen the chance of the appliance malfunctioning, the wash must be stopped as soon as possible after it is started while the locks are still in place. After that, in order to make sure the machine is not damaged, you must take the transport bolts off and diagnose it. For diagnostics, it is best to have a technician come to your house. They can check everything thoroughly and, if needed, repair the device.

It’s easy but necessary to remove the transport bolts from your Haier washing machine. Although these bolts are meant to safeguard the machine during transportation, if they are left in place, the washer may sustain damage once you begin using it. You can easily remove them and get your washing machine ready for use by carefully following the instructions provided in this article.

After removing the transport bolts, put them somewhere secure. If you move the washing machine in the future, you might require them once more. Your Haier washing machine will function smoothly and won’t be at risk of needless wear or damage once the bolts are removed.

By spending a few minutes on this simple chore, you can prolong the life of your washing machine and ensure that it operates at peak efficiency right from the beginning.

Video on the topic

Dismantling the transport bolts of the Haier washing machine

How to remove transport bolts from a Haier HWD80-B14686 washing machine

How to remove transport bolts on a Beko washing machine?

How to remove transport bolts on a washing machine

Transport bolts