Error 7 in the Asko washing machine

When you don’t know what Error 7 in an Asko washing machine means, it can be very annoying. This error usually indicates a problem that needs to be addressed, but the first step in fixing the issue is figuring out what caused it.

Error 7 is typically associated with the water drainage system. This might indicate a blockage in the drain hose, an issue with the pump, or another issue preventing the machine from effectively expelling water. By taking immediate action, you can save your machine from suffering more significant harm.

We’ll discuss the typical causes of Error 7 and offer simple fixes that you can do on your own. You can restore the smooth operation of your Asko washing machine with a little troubleshooting.

First, check the filter

In order to determine the precise cause of the issue, you must first perform a comprehensive diagnosis of the CM when this error code appears. In this case, it’s critical to identify the precise point in the operating cycle at which the system failed, the volume of water that was able to escape the tank, and the sound the machine made prior to the error. Diagnostics are required before you can determine how to use the device.

This error code is typically displayed by Asko brand equipment in two scenarios: either the garbage filter is clogged or the pump has failed. Since it is quicker and simpler to verify the latter, let’s begin here.

• Disconnect the equipment from all communications.
• Remove from and under the machine any objects that are afraid of moisture, such as washing powder, toilet paper, a rug, etc.
• Cover the floors in the room with oilcloth, rags or towels to protect the floors from moisture.
• Prepare a large basin for water, or another container.
• Pry up the door of the technical hatch of the SM, which is located at the bottom right of the case, with a flat screwdriver and open it.
• Find the dirt filter in the hole, which looks like a black round cover.
• Tilt the washing machine back until the front legs are about 5-8 centimeters off the floor.
• Place a basin under the dirt filter.

After making the necessary preparations, you are able to take the filter out on your own. Take the element’s projecting portion and rotate it clockwise to accomplish this. Then, in order to take it out of the seat, you must pull the plug in your direction. When you remove the filter, water under high pressure will start to pour out of the tank, so you must follow all instructions carefully.

You can check the dirt filter for damage and clean it of dirt after all of the waste liquid has drained. Start by getting rid of the dirtiest particles first, like hair clumps and stuck dirt. Next, the spiral needs to be cleaned with a strong stream of hot water directly from the faucet. Keep an eye out for deposits that are difficult to remove, such as scale, and if you find any, immerse the unit in a citric acid solution for approximately five hours. Warm, but never boiling, water is ideal; otherwise, high heat will cause the element to deform and become damaged.

You will need to wait until the liquid cools down before removing the dust filter from the washing machine tank while the water is still hot. Doing so could result in severe burns.

Additionally, a dust filter’s dirty seat may be the cause of error code 7. This is the reason it is crucial to check the area where it is installed as well as the part, for instance, by using a regular flashlight. Light up the aperture and take out any foreign objects that might have made their way into the seat. To fully remove dirt and small objects, it’s also worth wiping all interior surfaces with a damp cloth. If none of the adjustments were able to resolve the issue, you will need to look into the "home assistant" pump.

How to remove the pump from the machine?

Frequently, the washing machine’s pump requires maintenance. When the pump malfunctions, the machine is unable to remove the water since it is designed to remove waste liquid from the tank and drain it into the sewer. Once the element has been inspected and restored, the Asko machine needs to be empty in order to make the necessary corrections.

The design of washing machines from the Asko brand allows the pump to be accessed from the bottom. Disconnect the household appliance from the water and power supplies after getting a wrench, screwdriver, and basin ready. For partial disassembly, adhere to our guidelines.

• Pry off the technical hatch with a screwdriver and open it just like in the first instruction.
• Remove the trash filter.
• Release the pump from the fixing bolt, the head of which sticks out.
• Tilt the machine body back so that you can access the pump through the bottom.
• Unhook the wires and pipes connected to the pump.

Take pictures of the wiring attached to the part just in case, so you’ll have a reference of the proper connection when the time comes.

• Turn the pump counterclockwise, simultaneously pushing the element inward.
• Put your hand through the bottom and remove the pump.

Although it will take up more room, laying the washing machine on its left side will make it easier to remove the pump. You won’t need to operate by touch thanks to this clear view of the device’s internal parts. After obtaining the pump, you can start examining and fixing it.

In Asko washing machines, Error 7 usually denotes a water-related problem, most likely brought on by a clogged filter or a broken water inlet valve. Resolving this issue as soon as possible will protect your machine from additional harm and guarantee smooth operation.

Disassembling and cleaning the pump

The pump needs to be disassembled and cleaned first because it might be fine but is just extremely dirty. The pump impeller is the only rotating component in the device, so remove it. To accomplish this, split the element body into two sections, locate the portion containing the blades, and remove the retaining screws with a screwdriver.

The impeller should spin smoothly in its seat without being too free. It needs to be more firmly fixed in its location if it starts to fly off its axis. Remove all extraneous items and give the entire device a thorough water rinse if hair, dirt, threads, or other debris is preventing the blades from rotating.

The "home assistant" should be diagnosed and cleaned by experts at least once a year to extend the equipment’s recommended service life.

After the repair is finished, put the pump back where it belongs by following our directions in reverse order. Make sure you perform a test work cycle to verify the device is functional. Everything is good if there is no unnecessary noise coming from the machine, all of the liquid is drained when the program is finished, and the error code does not show up on the display. If not, you will need to change one of the SM’s essential components.

By comprehending and fixing Error 7, you can prevent time and frustration from being wasted on your Asko washing machine. This error is frequently related to an issue with the water heating system, and fixing it as soon as possible will keep your machine operating at peak efficiency.

First, make sure the heating element and its connections are in working order if you experience this error. Making sure these parts are functioning properly can frequently fix the problem.

Your washing machine needs to be serviced and maintained on a regular basis to function properly. Correcting mistakes such as these at the outset helps avert later, more significant issues.

Video on the topic

Asko washing machine does not work.does not spin, replacing beads, drain maintenance. Part 1

ERROR 98% of people! How to clean the FILTER of a washing machine? After cleaning, you will be surprised!

Haier HW50 12866ME washing machine error err7

ASKO W2084R washing machine. Video review

You won"t believe what happened when a small sock collided with an Asco washing machine!

ASKO washing machine repair. Stopped heating water. Moscow. 8-926-035-66-99 Nikita

Asko washing machine error 11 and solution to the problem

Asko washing machine door does not open, error 7