The Candy dishwasher does not turn on

It can be annoying to discover that your Candy dishwasher won’t start up, especially if you have a ton of dirty dishes to load. Numerous things can contribute to this frequent problem, some of which are simple to resolve on your own.

It’s advisable to troubleshoot the issue for a few minutes before losing your cool or calling a technician. Resetting the dishwasher or inspecting the power connection may be the easiest ways to solve the problem. If these simple solutions don’t resolve the problem, there may be a more complicated one at hand.

This guide will assist you in determining the likely causes and offer doable solutions to get your dishwasher operating again. The first step in fixing any issue, be it a power supply malfunction, a malfunctioning door latch, or a more serious internal problem, is figuring out what might be wrong.

What could have happened to the Candy PMM?

If the machine has stopped turning on, is not making any noise, or even has no lights, we will first go over the most frequent breakdown causes that should be looked at. First and foremost in a situation like this, you should confirm the most common and obvious thing: that the power supply is in working order so that you can diagnose the PMM on your own.

It is best to call a master for professional diagnostics if you are unsure of your skills; after checking, they will be able to fix the machine right away.

Make sure there is light in the house and that the equipment is connected to the mains before rushing to disassemble the device and schedule costly repairs. If the power supply is functioning properly, experts suggest examining the following potential causes of the issue:

• the machine"s power cord or socket is damaged;
• the dishwasher"s power button is out of order;
• the power filter is faulty;
• the control module of the device is broken.

Although there are many more potential causes for the unit to have stopped working, these are the most common issues that service center technicians deal with. In addition to these four points, you can also use an ordinary multimeter with an ohmmeter mode to check the device’s wiring. By doing this, the possibility that a power wire inside the machine’s body has burned out or broken is eliminated.

Lastly, the water heating element, also referred to as the heating element, frequently fails in Russian home appliances due to low-quality tap water. Either way, it’s always worthwhile to begin the check with the most straightforward causes of the breakdown and work your way up to the more intricate ones, so let’s begin with the simpler ones.

Power cord

Perhaps the most basic, but at the same time, the most dangerous malfunction is damage to the power cord. The fact is that sometimes, due to ignorance and carelessness, dishwasher owners place the body of the appliance directly on the power cord of the device. Usually this happens when the owner himself is engaged in the installation and connection of the dishwasher. This situation is dangerous because the power cord can be broken in the place where it is pinched by the body of the machine, which in the best case will leave a burnt mark on the floor, and in the worst case, a serious fire can even occur. To prevent this from happening to you, you should always carefully place electrical appliances in the house, carefully checking how they are positioned.

It is best to replace the unit’s cable right away with a new one if the wire is truly broken beneath the insulating layer rather than attempting to twist and fix it.

Using the same multimeter, you can confirm if the power cord is damaged. How can I find out?

1. Set the ohmmeter mode in the tester.
2. Connect the probes of the device to the teeth of the plug of the power cord that you are suspicious of.
3. Measure the resistance.

The cable has a hidden fault if the readings deviate from the average. The next checkpoint can be reached if the resistance is satisfactory.

A broken door latch, an internal electrical fault, or a problem with the power supply could be the cause of your Candy dishwasher’s inability to turn on. Before contacting a professional, you can try troubleshooting and possibly fixing the problem yourself by looking through these areas.

Protection against voltage surges

The Candy dishwasher’s capacitor might burst as a result of unexpected voltage spikes and other issues with the working environment. When this happens, the device will stop turning on and reacting to user input. If the power cord is in good condition but the machine is still unusable, proceed to test the dishwasher’s capacitor by following the instructions.

• Carefully remove the front panel of the device, which is located under the door of the dishwasher.
• Remove the side fasteners of the tray.

At this point, it’s best to cover the floor with blankets or rags because the machine may leak a lot of water, flooding the nearby floors and their neighbors.

• Open the door, remove the garbage filter and sprayer.
• Close the door, turn the device and remove the pallet, simultaneously extracting the hoses and wires. For reliability, take a few wiring photos so that during the assembly at hand there is an example of the correct connection.
• We find a circulation pump on which the capacitor is placed.
• Check the part in a multimeter in ohmmeter mode.

If the part is defective, you must take it apart, carry it to the store as an example, and purchase a new one. Installation is done in the opposite order specified in the instructions. If the element is functioning properly, assess the caliber of the wiring and contacts. These can be examined visually as well as with an ohmmeter, as burned or torn wires are visible.

There are several common reasons why your Candy dishwasher might not turn on. Make sure the power supply is connected and the outlet is working correctly before moving on to more complex inspections. Resetting the device can sometimes fix the issue.

If everything checks out on the basic level, you may need to look at the control panel or the door latch. The dishwasher may not start due to a broken latch, but problems with the control panel may need to be fixed by a professional. Furthermore, make sure the appliance is receiving power by checking the fuse or circuit breaker.

If the issue persists, it might be appropriate to seek advice from a qualified technician. Certain issues can be resolved at home, but others might call for specific equipment or knowledge. You can find the source of the problem and restart your dishwasher by tackling these problems one at a time.

Video on the topic

Pyramida, does not turn on, dishwasher, repair

Candy CDP 4609 dishwasher Eco indicator blinks and does not wash dishes. What could be the reason?

Candy dishwasher repair, dishwasher does not work, machine does not wash, pump repair

Common problems with Candy dishwashers. Simple repair of Candy dishwasher.

What to do if the dishwasher does not turn on

Dishwasher does not turn on, board repair.

Dishwasher does not start, what to check first

DISHWASHER DOES NOT TURN ON! WHAT IS THE REASON?