It can become quite annoying when your Electrolux dishwasher won’t turn on, especially if you depend on it to finish your everyday tasks. There are a number of possible causes for this issue; some are straightforward to resolve, while others might need more work.
Prior to making snap decisions or contacting a repair service, it’s critical to comprehend the possible causes. Occasionally, the problem could be as easy as a tripped circuit breaker or a loose plug. In other situations, it might be a more complicated issue, such as a broken door latch or control panel.
This post will walk you through the typical causes of your Electrolux dishwasher not turning on and offer helpful solutions for troubleshooting and fixing the issue. These suggestions will assist you in getting your dishwasher back up and running, regardless of the severity of the problem.
Why the equipment does not respond?
What should be done if the Electrolux dishwasher was operating correctly only yesterday, and now it not only won’t turn on, but it also doesn’t produce any noise or light up any of its lights or indicators? The absence of electricity in the house is the first thing you could presume. In order to avoid wasting time because of a common local power outage, this assumption should always be verified first.
You can call a specialist from the service center to your home for an accurate diagnosis, as it’s not always necessary to search for the causes of the malfunction independently. They will inspect the dishwasher quickly and effectively.
Therefore, make sure your equipment is de-energized before getting ready for repairs. Surprisingly, this is frequently the primary cause of the machine’s inability to turn on. The following factors should be taken into consideration if the equipment is connected to the power grid and the home has electricity, as they could prevent the unit from turning on:
- the power cord or socket for the dishwasher is damaged;
- the power button of the device is broken;
- the power filter is out of order;
- the control unit of the dishwasher is damaged.
These are the most typical kinds of malfunctions, but this is not an exhaustive list of the causes of the equipment not turning on. Furthermore, you can always use a standard multimeter to examine the wiring and contacts. The tester is able to precisely identify burned or broken wire. Furthermore, you should never rule out the possibility that the machine won’t turn on because of a heating element failure. In this scenario, purchasing a new heating element will cost money.
It is worth checking the power cord
There is a list of all the common malfunction types. Now let’s take a closer look at the most frequent cause, which is damage to the power cord. When a brand-new Electrolux dishwasher is installed and then fails to turn on, it is a common occurrence, even though it operated correctly in the store during the audit. This is what happens when the PMM owners inadvertently install equipment on the network cord by pressing it firmly with the weight of the entire machine due to inattention.
This frequently occurs when the technique is installed independently, so be sure to carefully check that the machine stands upright without coming into contact with any cables or hoses. If not, there is a chance that the network wire will be severed where it was crushed by heavy machinery, leaving a possible burning trail on the ground. Thus, in order to avoid unintentionally harming a recent purchase or gender, pay close attention to every detail when getting the unit ready for extended use.
When the dishwasher is suspected of having a damaged wire and will not turn on, what should be done? In this instance, a basic multimeter is required.
- Switch the tester to ohmmeter mode.
- Connect the probe of the device to the fork of the network wire, which is possibly damaged.
- Check the resistance.
In the event that a single wire in the network cord is pierced, it is not advisable to twist or solder the damaged element. It is safer to replace the network cord entirely to prevent fire and other emergencies.
It will be possible to determine whether the wire is functioning based on the indicators that the tester has provided. Once everything with him is in order, we proceed to the next checkpoint.
A broken or unresponsive Electrolux dishwasher can be annoying and inconvenient. A tripped circuit breaker, a loose power connection, or a malfunctioning door latch could be the only causes of the problem. Technical issues like a broken power button or a malfunctioning control board could also be the cause. In order to get your dishwasher back in working order without requiring professional repair, this article will walk you through the troubleshooting steps.
Network capacitor
Even in the twenty-first century, abrupt cuts in mains voltage and unplanned power outages still occur, and they can be detrimental to delicate household appliances and other technologies. All of the aforementioned factors combined with unfavorable operating circumstances may harm the dishwasher’s network capacitor. You will need to carefully examine the internal components of the "home assistant" after partially disassembling it with your hands to confirm that this is the issue.
- Remove the front panel of the dishwasher, located under the door of the device.
- Disconnect the side fasteners that secure the tray.
To prevent flooding the floor with any residual water from the dishwasher, you can cover the surface with rags or towels as a precaution.
- Open the door of the device, remove the dust filter and impeller.
- Close the door, turn the household appliance over.
- Carefully remove the tray, simultaneously disconnecting the hoses and wires.
- Find the circulation pump on which the network capacitor will be installed.
- Using the same multimeter in ohmmeter mode, check the resistance of the element.
Make sure to inspect the unit’s wiring and contacts, as any damage to these areas can be seen with the naked eye. If the capacitor was the source of the malfunction, you will need to take the component out and use it as a sample to purchase an identical one from a hardware store. If the component is functioning properly, then more investigation will be necessary to find the issue.
| Problem | Possible Cause |
| Dishwasher doesn"t start | Check if it"s plugged in properly |
| No power | Ensure the power outlet is working |
| Door won"t close | Inspect the door latch for any obstructions |
| Control panel unresponsive | Try resetting the dishwasher by turning it off and on |
| Delayed start mode active | Check if the delay start function is enabled |
First, make sure to check a few basic things if your Electrolux dishwasher isn’t turning on. Verify that the power supply is connected and that the outlet or fuse are in working order. Occasionally, all it takes to fix the issue is a quick reset that involves unplugging the dishwasher for a short while.
If none of these simple solutions resolve the problem, there may be a more complicated problem, like a broken door latch, a control panel issue, or even a wiring problem within the structure. In these situations, it might be best to refer to the user manual or seek assistance from a professional.
Maintaining a seamless home routine requires keeping your dishwasher in good operating order. In the long run, you can save time and stress by preventing problems before they arise with regular maintenance and being aware of potential issues.
