It is not as hard as you might think to get your Beko dishwasher up and running. Whether you’ve never used a dishwasher before or you’re just unfamiliar with this specific model, following a few easy steps will quickly have your dishes spotless. It all comes down to knowing which buttons to press and double-checking that everything is configured properly before you begin.
Make sure the dishwasher is loaded correctly before starting. Arrange the dishes according to their designated locations, placing delicate items on top and larger items, such as pots and pans, on the lower rack. To ensure that water flows freely over all surfaces, make sure nothing is obstructing the spray arms and avoid packing the machine too full.
It’s time to choose the appropriate program after the dishwasher is loaded. Dishwasher cycles from eco-friendly choices to more thorough cleanings for highly soiled dishes are available in Beko models. After deciding which cycle best suits your needs, hit the power button and use the control panel to choose the program. When you finally hit the start button, your dishwasher will handle the rest!
- The first start of the technique
- Video on the topic
- Review of the dishwasher BEKO DFS-05014X BEKO DISHWASHER
- Dishwasher Beko BDDIN16420 Software Setting the amount of rinse aid!!!
- Beko DSFS 1530_2 dishwasher start-up
- BEKO DFN05310W(S) dishwasher Setting water hardness
- Beko BDIN16420 dishwasher Program Setting the amount of salt!!!
- Beko BDIS16020 dishwasher
The first start of the technique
The most crucial dishwasher is to take your time and pay close attention to user management, which is always accompanied by equipment. It’s okay if it turned out that there are no instructions available; we’ll go over exactly how to start the Beko sink correctly for the first time in detail right now.
If you want to quickly test the equipment’s performance, do not rush to load it with a mountain of dirty dishes; instead, let the equipment idle for its first launch. Prior to using the device, it is necessary to remove any factory grease, dust, and debris that may have accumulated during assembly at the manufacturer’s facility.
However, you must ascertain the necessary hardness level prior to initiating a test cleaning cycle. It is directly impacted by your city’s tap water quality. Checking this can be done as follows:
- open the tap and let the water run for about a minute;
- fill a glass of water;
- unpack the pre-purchased test strip and lower it into the glass for literally a second;
- shake the strip and wait another minute;
- examine the result on the strip and compare it with the instructions;
The official website of the city water utility, where they are obligated to publish monthly public data on the quality of the water, is another resource you can use to find out how hard your tap water is.
With this knowledge, you can select the proper hardness level in the PMM settings. For instance, the dishwasher should be set to the hardness level of 3, as indicated by the test strip. What are you going to need for this?
- Press the timer and P buttons for about 3 seconds until the countdown ends.
- The machine will go into the function selection mode, in which you can use the same P button to go to the hardness mode, displayed as the English letter r.
- Using the timer button, select the desired hardness level.
- Press the power button to save the setting.
To prevent scale buildup in the machine, we must now add salt granules to the salt container. This step can only be omitted if your water’s hardness is 1 or lower. If this isn’t the case, we move on to filling the tank with salt granules.
- Pull out the lower basket for dishes from the washing chamber.
- Unscrew the lid of the salt container.
- Insert a special funnel, which comes with the Beko dishwasher, into the hole in the salt compartment to make it easier to load the salt granules.
- Pour about a liter of water into the hopper.
- Pour in about a kilogram of salt.
- Remove the funnel.
- Now you can stir the salt with a spoon so that the salt solution is prepared faster.
- Tightly screw the tank lid clockwise.
Only specialized salt made for dishwashers should be used, according to experts, as its larger and cleaner granules can better restore the ion exchanger than those of regular certified salt.
Make sure the salt solution does not spill onto the washing chamber’s bottom after the salt has been loaded. If this occurs, nothing bad has happened, but it is best to start the wash right away or wipe off any remaining salt with a cloth to prevent corrosion. Because the second choice is better, it is advised to add the salt immediately before the working cycle begins.
To complete the task, simply add detergent and initiate an idle cycle. You can choose household chemicals that come in tablet, gel, or powder form, which contains multiple products at once. Whichever product you select, you must put it in a designated container meant for household chemicals before loading the rinse aid to ensure that the dishes come out streak-free after washing.
Refusing to use 3-in-1 tablets and capsules in favor of using household chemicals separately will result in a better end product at a lower cost.
Pricey dishwasher models come with a dedicated cleaning mode; if yours doesn’t, you can choose a regular cycle that reaches a minimum temperature of 60 degrees Celsius. Additionally, a test run will ensure that everything is working properly, there are no leaks, and the apparatus is suitable for dishwashing. After the test, give the equipment some time to cool down before beginning a full working cycle.
Make sure nothing is obstructing the spray arms before loading your dishes in a Beko dishwasher and starting the wash cycle. Place dishwasher detergent inside the allotted space and shut the door firmly. Press the main power button to turn on the machine. Using the control panel, choose your preferred program. Eco-friendly washes and rapid cycles are among the typical options. When you finally hit the start button, the dishwasher will start cleaning.
| Step | Instructions |
| 1 | Open the dishwasher door and load the dishes properly. |
| 2 | Add the detergent in the detergent compartment. |
| 3 | Close the door securely. |
| 4 | Press the "Power" button to turn on the dishwasher. |
| 5 | Select the desired washing program by pressing the program button. |
| 6 | Press the "Start/Pause" button to begin the wash cycle. |
Once you know the basic steps, turning on your Beko dishwasher is easy. Make sure nothing is obstructing the spray arms by correctly loading your dishes before proceeding. Next, fill the dispenser with the appropriate amount of detergent for the load you’re washing.
Once the dishes and detergent are loaded, firmly shut the door. Next, use the control panel to select the wash cycle that best fits your needs. The control panel will walk you through the choices whether you’re doing a thorough wash or just a quick rinse.
Once everything is configured, hit the start menu. The dishwasher will take care of your dirty dishes with the least amount of work on your part. Your dishes will be clean and ready to use once the cycle is finished. It really is that simple!
