Hansa dishwasher does not drain water

It can be quite annoying to find yourself with dirty dishes and standing water at the bottom of your Hansa dishwasher if the water isn’t draining. This problem is more common than you might imagine, but fortunately, it can usually be resolved on your own without the need to hire a professional.

The first step in solving this issue is figuring out what the possible causes could be. It might be as easy as a clogged drain hose or filter, or it might be a little trickier, like a malfunctioning pump. There are a few troubleshooting techniques you can try to get your dishwasher back in working order, regardless of the cause.

This post will walk you through the most frequent causes of your Hansa dishwasher not draining and provide workable fixes to help you fix the problem. At the conclusion, you ought to know exactly how to handle this issue and stop it from occurring again in the future.

If the water in your Hansa dishwasher isn’t draining, the cause could be a blockage in the drain hose or filter, a broken pump, or a problem with the drainage system. You can frequently solve common problems on your own without the assistance of a professional by recognizing and addressing them.

Why the equipment does not remove waste liquid?

The dishwasher may not empty water into the sewer for a variety of reasons. In actuality, you can solve most issues by yourself. Erroneous disposal of waste liquid may result from:

• clogged drain hose;
• clogged filter unit of the machine;
• failed pressure switch;
• burnt out pump;
• clogged siphon or sewer pipe;
• damaged control module.

Without hiring a specialist, you can remove the obstruction from the drain system on your own.

You will have to "weed out" one theory after another if it appears at first that there is no clear explanation for the dishwasher’s improper operation. Examining the drain hose is the easiest thing to do first. Verify whether the hose is kinked. Feel it for any obstructions. Use a long metal wire to clean the corrugation if there is an obvious "garbage plug" inside.

Next, examine the drain pump and garbage filter on the dishwasher. The pressure switch is the next in line if everything is in order here. We will go into greater detail about every potential issue and how to resolve it on your own.

The culprit is a blockage

A clogged garbage filter is the most common cause of the dishwasher not draining water into the sewer. Food scraps, fruit pits, broken glass, napkin fragments, and other items that have got inside the machine get accumulated in it. The washing chamber of the dishwasher has the filter element at its base.

In order to clean the Hansa dishwasher’s filter unit, you must:

• de-energize the equipment;
• scoop out the water that has accumulated in the dishwasher tray;
• remove the filter element.

In most contemporary dishwashers, there are multiple filters instead of just one. It includes:

• fine-mesh fine filter;
• coarse filter;
• external mesh filter;
• supporting parts.

It is necessary to disassemble the filter unit into its component parts after removing it. Every component is given a separate wash. It is preferable to soak the parts in water with baking soda or citric acid for several hours if there is a thick layer of limescale covering them.

Make sure the area where the trash filter is placed is clean. Particles of food and dirt also collect there. Once the "cleaning" is complete, put the unit together and place it where it belongs. If testing the machine doesn’t solve the issue, it’s time to look for a different solution.

Cleaning the dishwasher’s filter unit at least once a month is advised.

It is then imperative to remove the obstruction from the sewer pipe and siphon. The water usually drains poorly from the machine, the sink, and the bathtub if the riser is clogged. How to verify this presumption

• disconnect the dishwasher drain hose from the siphon;
• direct the end of the corrugated pipe into an empty container;
• run a short wash cycle;
• observe the operation of the machine.

There isn’t a blockage if the waste liquid is still inside the washing chamber. You will need to clean the siphon, though, if the water begins to drain. Put on some rubber gloves, grab an empty container, and begin disassembling the gadget.

If you don’t have time to fiddle with the siphon, you can attempt cleaning it with specialty products from the store. The outlet in the kitchen beneath the sink is typically where the dishwasher is plugged in. So, as directed on the package, purchase a special gel and pour it into the sink.

Occasionally, a garbage plug forms in the sewer pipe rather than the siphon. Should the obstruction be sufficiently deep, you’ll need to contact a plumber. The issue will be swiftly resolved by the master.

Should the issue not stem from the obstruction of the drain system components, you will need to examine each dishwasher unit individually, as they are all somehow connected to the extraction of water from the chamber. It’s advised to begin with the pump. The pressure switch and control module will be the next in line.

The pump is not working well

The waste liquid from the washing chamber must be pumped into the sewer by the drain pump. What might occur to it? The pump may burn out in certain situations or become clogged in others. You must take the part out of the dishwasher’s body in order to diagnose it.

The Hansa dishwasher must be partially disassembled in order to obtain the pump. To remove the tray, place the dishwasher on the ground. Certain experts advise removing the machine’s side wall rather than its bottom. You can decide which approach is more practical for you.

The machine’s drain pump then needs to be taken out. Remove all wires and pipes from it in order to accomplish this. Examine the impeller stroke after removing the pump; the blades ought to spin freely.

Occasionally, something foreign, like a fragment of glass, can be discovered in between the pump impeller’s "petals." It is sufficient to clean the blades and replace the pump in such a scenario.

Verify the pump’s functionality to make sure the impeller is not damaged or obstructed. Measure the resistance generated by the drain pump contacts using a multimeter. About 200 Ohms should be the standard resistance. The part cannot be repaired; it must be replaced if the readings are noticeably off.

You must be aware of your Hansa dishwasher’s model in order to purchase an appropriate drain pump. Another option is to take the disassembled pump to the retailer and ask the seller to choose an equivalent. Purchasing original components is preferable.

It can be annoying when your Hansa dishwasher won’t drain water, but you can usually resolve the problem on your own. First, look for obstructions in the pump, drain hose, and filter areas. These are typical locations where debris or food particles may gather and obstruct appropriate drainage.

The dishwasher’s settings or the drain pump may be the issue if the filters and hoses are clear. Erroneous settings can be quickly reset, but a broken pump may require repair or replacement. If you need advice specific to your model, always consult your user manual.

You can frequently restore your dishwasher to normal operation without the need for expert assistance by taking care of these possible causes. Drainage problems can also be avoided in the future with routine maintenance, such as filter cleaning and periodic hot cycle runs for the dishwasher.

Video on the topic

The dishwasher does not drain water. No drain in the dishwasher. Dishwasher drain pump. Drain hose.

The dishwasher does not drain:-(( Life experience.

The dishwasher does not drain water. What to do?

The water does not drain in the dishwasher, what to do