First launch of a dishwasher

It can be thrilling to set up your new dishwasher for the first time. Who wouldn’t want to reduce the amount of time and effort required for everyday tasks? But before you enjoy the convenience of always having spotlessly clean dishes at your disposal, make sure your dishwasher is set up correctly and ready to go.

There’s more to this initial start than just pressing a button. To get your machine off to the best start possible, follow these few easy but necessary steps. These simple initial actions, like inspecting the connections or performing a cycle, can have a significant impact on your dishwasher’s long-term performance.

We’ll walk you through every step required to get your dishwasher up and operating properly in this guide. You can start taking advantage of your new appliance’s efficiency and convenience with a little bit of preparation.

Step	Description
1. Unpack and Inspect	Carefully unpack the dishwasher and check for any damage or missing parts.
2. Remove Interior Packaging	Take out all the protective packaging materials from inside the dishwasher.
3. Connect Water Supply	Attach the water inlet hose to the water supply valve.
4. Connect Drain Hose	Secure the drain hose to the designated drainage point.
5. Plug in the Power	Connect the dishwasher to a power outlet.
6. Run a Test Cycle	Select and run an empty cycle to check for any leaks and ensure proper operation.

What happens at the first launch of the dishwasher

Do not turn on PMM right away, even if you are overcome with impatience. Carefully read the instructions. There is no need to load dishes because the initial start is a test. All well-known brands of dishes, including Bosch, Siemens, Electrolux, Samsung, Miele, and others, are subject to this requirement. If you buy a built-in model, don’t install it in a furniture niche until the first inclusion has been successfully completed.

Verifying every connection before turning on the dishwasher for the first time

Initially, the dishwasher needs to be connected to communications before it can be turned on. It will be evident when you turn it on for the first time whether the dishwasher was installed correctly and whether it is a long-term household appliance.

The following are the primary causes of dishes not being cleaned when you first turn it on:

1. During the production process and subsequent sales, dust, dirt, stains and grease deposits from the hands of workers, sellers and buyers accumulate inside the dishwasher. All this is removed during the first start-up.
2. All systems are tested for serviceability. You can determine how quickly water flows and heats up, how the drain modes and dish drying work, whether the chamber was cleaned well.
3. All connections to the water supply and sewerage are checked for leaks. The dishwasher should not be pushed into a furniture opening before the first start-up, so that there is access to possible leaks. Also check the correctness of the electrical network installation.
4. Owners receive knowledge on how to operate a dishwasher. This will help them use this equipment correctly, avoiding mistakes in further operation.

When a leak is discovered right away after turning on, it needs to be fixed.

Procedure before the first start

Check for any remaining advertising stickers or chamber packaging material before turning it on for the first time. Bosch dishwashers from the Hansa and SPV series, as well as many other models from well-known brands, are known to contain these.

Be mindful of the foam packing balls, of which the PMM contains a good number. When found, all of this needs to be eliminated.

Additionally, use a fresh cloth to wipe the chamber clean of any obvious contamination.

Prior to the initial startup, the dishwasher chamber should be mechanically cleaned.

The corresponding compartments must be filled with special softening salt, washing powder or gel, rinse aid, or use a 3-in-1 tablet that combines detergent and rinse aid even though the dishes are not loaded into the dishwasher.

Add salt to the hopper even if you’re using "universal" tablets. Fill the tank with approximately one liter of purified water beforehand. Next, add 500 g or so of salt there.

Greetings, readers! Join our Telegram channel to receive helpful housekeeping and other information: Visit the channel.

The chamber’s bottom contains the salt compartment, which is covered by a lid.

Make sure to indicate on the control panel whether the dishwasher should use a tablet, powder, or gel to clean the chamber. This guideline is applicable to PMM models that are unable to identify the type of detergent they are using.

A range of dishwasher detergents

You can acquaint yourself with the benefits and drawbacks of different dishwasher detergents by watching the following video:

You need to set the salt consumption level (if the machine doesn’t figure it out on its own) in addition to the detergent type. The degree of water hardness determines this parameter; the harder the water, the more product is required to soften it. Readers can learn how to adjust the salt consumption level in a Bosch dishwasher by watching the following video:

Use the special strips that typically come with the dishwasher to find the hardness level. These test strips are also sold in the network of retail stores.

Using the test strip color to determine the hardness of tap water

Special detergents are produced by the chemical industry specifically for the dishwasher’s initial start-up. They eliminate pollutants that have developed during the production process with greater cleaning and disinfecting power. However, this common household chemical is only meant to be used during the dishwasher’s initial startup. Such products ought not to be utilized in the future.

The Bon and Magic Power brands’ initial dishwasher startup products have shown to be reliable.

The last phases of getting ready:

• install the machine according to the level, for which you need to tighten the legs of the body;
• check whether the sprayers rotate freely by turning them by hand;
• remove the filter located in the bottom next to the sprayer and rinse it with running water.

Test run of the dishwasher

Thus, all communications are linked and the compartments are filled with detergents. On the tee that feeds water into the dishwasher, the water valve is open. To begin configuring the household appliance, simply press the power button.

Only the nets, baskets, and other utensils from the dishwashing kit should be inside the chamber.

The detergent type and amount of salt used are predetermined. Reduce the dough’s rinse aid consumption to the lowest possible setting. As you use it more, you’ll choose the ideal amount of consumption.

The arrow can be moved to adjust the rinse aid consumption (position 1 indicates the minimum level).

Choosing a program that will enable you to wash the chamber and every component inside as effectively as possible completes the setup manipulations. Use the longest washing program and the highest water temperature to achieve this.

Bosch dishwasher control panels varying in model – integratedand partially integrated

Shut the door, launch the application, and keep an eye on the status of the communications and the rate of completion at various points in the process. In the event that the dishwasher functions properly, then:

• water is collected continuously, the machine does not stop the program;
• liquid heating is performed for a short period of time;
• the used liquid is completely drained into the sewer;
• after the drying process, there is no moisture left inside.

First dishwashing

The dishwasher is installed in the space designated for it if the test is successful. Remember that the dishwasher needs to be reconfigured when it is connected again if it has been disconnected from the power source.

Dishwasher users favor Finish brand products because they are reasonably priced and contain salt, rinse aids, and washing powder.

Then, with a load of dirty dishes, you can complete the first complete cycle. It is necessary to load detergents meant for dishwashing, bowls, and other utensils, not for the initial wash. Powdered detergents are the most cost-effective kind.

Dishware needs to be loaded precisely according to the guidelines provided by the manufacturer.

Observe the guidelines carefully when loading dishes into the dishwasher. This procedure determines how well the dishes are cleaned of oil and debris. Read the machine’s instructions carefully once more to ensure that you don’t make any mistakes. The primary requirement is to arrange the dishes so that the liquid from the sprayers completely covers them.

Take caution: you risk getting burned by steam if you open the dishwasher door right away after the program is done.

Choosing the right program

Selecting a program for the dishwasher is a crucial step that follows loading detergents and kitchenware. Every mode is separated into multiple groups, some of which may have different names depending on the manufacturer.

1. Wash with pre-soaking – the program is designed for inventory with burnt or dried food residues and a large amount of fatty deposits. The work is carried out in two stages – preliminary and main wash.
2. Intensive wash – designed for very dirty dishes. The effect is achieved due to the high water temperature. This mode cannot be used for plastic dishes, as well as with a delicate coating.
3. Standard mode – allows you to wash plates with a medium degree of contamination at a moderate water temperature.
4. Economical program – used to wash relatively clean cutlery, while the energy, water and detergent consumption are minimal.
5. Delicate wash – designed for plastic, porcelain and crystal dishes, as well as cutlery with a delicate coating.
6. Quick wash – used for easy rinsing of plates, forks and spoons with detergent.

Typical dishwashing programs

The dishwasher will operate without problems for the duration of its life if it is operated correctly. We hope that our post will clarify the subtleties of the device’s initial startup for you.

A straightforward but crucial first step in making the most of your dishwasher is to turn it on. You can make sure your dishwasher is set up properly for best performance and longer-lasting use by following the suggested procedures.

For your first run, don’t forget to empty the detergent, remove any packaging, and choose the appropriate settings. This helps the machine get ready for regular use by removing any manufacturing residues.

Your dishwasher is prepared to take on the daily task of cleaning your dishes now that everything is set up and functioning properly, giving you more time and less trouble with your kitchen routine.

A dishwasher’s initial start-up is essential to ensuring its smooth and effective operation. This procedure entails unpacking the machine correctly, turning on the water and electricity, running an empty cycle to remove any manufacturing residue or dust, and inspecting it for leaks or other problems. By taking these easy precautions, you can help prevent future issues and set the stage for consistently clean, spotless dishes.

Video on the topic

How to use the dishwasher correctly

First start-up of the BOSCH SMV25EX03R dishwasher

Dishwashers – first start-up

First start-up of the dishwasher / Tips, mistakes, test #Mamacholi

First start-up of the Korting dishwasher

HOW TO MAKE THE FIRST START DISHWASHERS!