Siemens dishwashers are a popular option in many homes because of their reputation for efficiency and usability. However, the initial setup may be a little confusing if you’re not familiar with this brand. For optimal results, you must know how to turn on your Siemens dishwasher and initiate a wash cycle.
We’ll walk you through turning on your Siemens dishwasher and choosing the appropriate wash program step-by-step in this article. These straightforward instructions will help you get started quickly and easily, regardless of whether you’re using it for the first time or just need a quick refresher.
Together, we can ensure that your dishes are always perfectly clean!
Simply load your dishes, add detergent, shut the door firmly, use the control panel to select the desired wash cycle, and press the start button to turn on a Siemens dishwasher and begin a wash. Your dishes will be clean and ready to use once the dishwasher starts its cycle.
Dishwashing detergents
You should carefully read the user manual, which contains all the answers to your questions, as soon as you buy the dishwasher. The connection between the "home assistant" and the initial setup, as well as the nuances of disharranging and operating tips, are all thoroughly covered in the document. Consequently, although it is inconvenient, losing the instructions is not fatal because we will cover all of these crucial details in this post.
There should never be any dishes in the washing chamber during the dishwasher’s initial cycle. To remove any dirt or dust that may have entered the device during factory assembly and long-term storage in the warehouse, the equipment must be given this kind of idle start. This is also an opportunity to assess the device’s performance and the accuracy of the connection to all utilities.
Detergents should still be added to the device even if there won’t be any dishes in the test wash.
The proper operation of a dishwasher requires a whole range of unique household chemicals. The products on this list must be added before the machine runs, and afterward, it must be closely watched to ensure that they don’t run out:
- Specialized salt;
- Detergent in the form of powder, gel or tablet;
- Rinse aid.
As a result, you must add detergent and rinse aid, load salt granules into a designated bin, and modify the dishwasher’s hardness level before beginning the wash cycle without dishes. Let’s begin by discussing the salt and ion exchanger.
- Find out the hardness level of your tap water. This can be done using test strips, or simply by looking at the information on the official website of the city water utility, which is required to post up-to-date data.
- Set the hardness level on the machine in accordance with the data on tap water. For example, if the test strip showed a hardness level of 2, then this level should also be set on the Siemens dishwasher.
If you’re lucky enough to live in a city where the tap water hardness is 1 or lower, you can completely avoid using salt.
- To load salt into a special tank, pull out the lower basket in the washing chamber, find the large lid of the salt bin there and unscrew it. Pour about a liter of water into the compartment, then add about a kilogram of salt, depending on the size of your salt tank, and then screw the lid tightly.
- Immediately after creating the salt solution, you should quickly start an idle cycle so that the salt water does not damage the internal components of the dishwasher. This is also true for the situation when salt accidentally spilled on the bottom of the washing chamber.
Avoid using regular table salt and basic detergents for hand washing dishes if you don’t want to ruin your brand-new home appliances. Regular table salt is dirtier and smaller than special salt, which makes it less effective at reviving the functions of the ion exchanger.
Do not rush into a test run, even if you spilled a little salt, as you must first add detergents to designated compartments on the dishwasher door. Two containers are located on the door: one for the primary wash, which can hold 20 grams of detergent, and another with a capacity of roughly 5 grams for soaking. After adding household chemicals, make sure the compartment lid is securely closed.
The test wash preparation is now complete. You must also add rinse aid after the test is finished, as this expedites the drying process and aids in the removal of stains from dishes. This tool’s reservoir, which holds approximately 110 milliliters, is situated in the same area as the detergent compartments. Furthermore tweak the dispenser, paying particular attention to the same stiffness settings. Try increasing the rinseum dosage until the dishes are completely clean at the end of the working cycle if there are still water stains on them after washing.
We place dishes in the baskets
Loading dishes is covered in the second paragraph of the required preparation program for the inclusion of PMM. From the outside, it appears that this is as simple as placing the canteens in baskets and shutting the laundry room door. If, on the other hand, you disregard the basic guidelines for dishwashing, you may leave with a mountain of unclean plates rather than immaculate dishes—as if there had never been any sinks at all. Prior to using this home appliance, take note of the following list of items that cannot be washed:
- Items with wooden, porcelain or mother-of-pearl inserts;
- Plastic items without heat resistance;
- Tin and copper cutlery;
- Fragile glasses and crystal items;
- Wooden dishes;
- Synthetic fiber items.
To avoid clogging the dishwasher’s trash filter, make sure to remove any large food remnants, bones, napkins, tea bags, and other debris from the dishes before beginning the wash.
After reading the primary restrictions, it’s time to review the loading guidelines. It is crucial to adhere to each and every one of the following guidelines:
- place all deep dishes upside down, and items with curves and indentations at an angle so that water does not accumulate inside, but flows down during the wash;
- each cutlery must stand securely in its place so that the stream of water does not tip it over;
- the dishes should not be piled high, none of the items should be stacked on top of each other, and no cutlery should touch or interfere with the movement of the sprinklers;
- there should be a gap between each element so that water can circulate freely, washing the dishes from all sides;
- small dishes should be placed in the upper basket, for example, mugs, glasses, plates, saucers, plus sharp and long cutlery, which should be laid horizontally;
- large cutlery items such as pots, baking sheets, frying pans and lids are loaded into the lower basket;
- spatulas, skimmers, as well as forks and spoons are placed in a special tray for cutlery;
- large items should be placed at the edges of the basket, and smaller items – closer to the center;
- plates should be installed with the inner side facing the center of the basket;
- it is strictly forbidden to overload the equipment with a mountain of dishes, as this will affect not only the quality of washing, but also increase energy consumption and the risk of breakage. It is better to divide a large batch of dishes into several working cycles;
- do not load very dirty and lightly soiled dishes into the dishwasher at the same time.
You can raise or lower the upper basket and remove the glass mounts to make more room for loading in the event that there aren’t many large dishes that won’t fit inside the washing chamber.
There have been many expert recommendations over the years regarding loading dishes, and you shouldn’t disregard them because they all have a significant impact on the quality of the wash.
| Step | Description |
| 1 | Load the dishes into the dishwasher, making sure they are properly arranged. |
| 2 | Add the appropriate amount of dishwasher detergent to the dispenser. |
| 3 | Close the dishwasher door securely. |
| 4 | Press the power button to turn on the dishwasher. |
| 5 | Select the desired wash cycle using the program buttons. |
| 6 | Press the start button to begin the wash cycle. |
Once you get the hang of it, turning on a Siemens dishwasher and initiating a wash cycle is simple. You can make sure your dishes are spotless every time by adhering to a few easy steps.
As you load your dishes, make sure that nothing is in the way of the spray arms. After adding the proper detergent and rinse aid, firmly shut the door.
Next, pick the washing program that will work best for you. Siemens provides a range of options to handle any load, no matter how intense or how lightly soiled the dishes are.
Lastly, turn on the dishwasher by pressing the start button. You can rely on Siemens to handle your dishes in an effective and timely manner.
