How to turn on the Atlant washing machine?

Although it may seem easy, turning on a washing machine can be a little tricky at first, especially if it’s a new model or brand, like Atlant. Knowing how to use this appliance can save you time and avoid mistakes, regardless of whether you just bought it or are assisting someone else in getting started.

We’ll walk you through the basic steps of turning on your Atlant washing machine in this guide. We’ll go over the key settings and buttons you need to know so you can confidently start your laundry.

You can maximize the performance of your Atlant washing machine and guarantee that your clothes are consistently clean and fresh with just a few simple steps.

Step Description
1 Ensure the machine is plugged in and the water supply is connected.
2 Open the door and load your laundry into the drum.
3 Add detergent to the designated compartment.
4 Close the door securely.
5 Select the desired wash program using the control knob.
6 Press the start button to begin the wash cycle.

Start-up before commissioning

The machine should turn on without any issues if you follow the instructions. Following every instruction provided by the manufacturer is crucial. The equipment must be installed correctly, with a hard, level surface selected for its location. Take care to undo the transport bolts that secure the tank in place, preventing it from becoming unbalanced while being transported. Starting the washing machine while the drum is "sealed" is forbidden because it could cause serious mechanical damage. Connecting to the utilities completes the installation.

Make sure you read the manufacturer’s instructions before using the Atlant washing machine for the first time!

We take action and initiate the first "idle" cycle after making sure the machine is ready.

  1. Check the drum. The first cycle is started without laundry: open the door, check if there are any forgotten things inside, and close the hatch tightly.
  2. Add detergent.
  3. Connect to the power supply. Insert the power cord into the socket.
  4. Start the cycle. Press the network button, turn the programmer to the desired program and click on "Start".

In the event that the machine remains unresponsive even after pressing the "Start" button, it would be prudent to inspect the door. The UBL electronic lock most likely malfunctioned. Until a click is heard, the hatch must be opened and closed again.

The machine is started up for the first time without any laundry!

It is reiterated that the first cycle is set to "idle," meaning it contains detergent but no laundry. This will get rid of the "chemical" smell and clean the equipment of factory grease. An additional benefit is that you can test the washing machine’s operation without jeopardizing your clothing. Consequently, we keep an eye on the machine’s behavior to see if it makes any strange noises, stops abruptly, freezes, or exhibits any other suspicious behaviors.

Make sure the water supply is connected and plug the Atlant washing machine into a power outlet before turning it on. Load your laundry, open the door, and fill the designated compartment with detergent. Using the control panel, choose the wash program you want to use, then hit the "Start" button. The washing cycle will start, and you can keep an eye on its progress on the display.

We “force” the machine to wash

Once your initial attempt is successful, you can go ahead and do the laundry. In this scenario, you will need to learn how to properly turn on the machine and select a washing mode suited for your laundry. The modern Atlant’s dashboard is so full of buttons and lights that even the most seasoned housewife could become easily confused. Pressing at random is not necessary; it is preferable to understand all of the symbols and acronyms.

Check out the instructions to find out what each button signifies. Generally speaking, every washing machine model comes with a few standard modes that have cycle parameters already set. The program’s name alone gives away its goal: "Wool" refers to woolen goods, "Cotton" to cotton linen and towels, and "Delicate" is a hand washing analogy.

Thus, this is how the cycle typically begins:

  • plug the machine into the socket;
  • open the water supply;
  • put the laundry in the drum;
  • close the hatch tightly;
  • add detergent;
  • press the "Power" button;
  • select the mode with the selector;
  • press "Start".

The machine will beep when the wash is finished. However, the hatch cannot be opened immediately because the electronic lock must be removed within two to four minutes.

Where to add the powder?

Additionally, detergent is added in accordance with the directions. First, we check the dosage; generally speaking, it’s best to figure out a ratio of 100 grams for every 5 to 7 kg of weight. Less will leave stains behind; more will cause foaming to rise and leave items without time to rinse. It is preferable to use a special measuring cup or spoon rather than acting "by eye."

Take note of the dosage when adding the detergent!

Let’s now determine what and where to add. Pulling the tray towards you will allow you to open it and see what compartments are available. Pour the powder into the largest one, designated "I" or "A," and the conditioner or rinse aid into the central one, designated "*." Only the "Pre-wash" mode is supposed to be used with compartment "II" or "B."

You must adhere to the manufacturer’s instructions when using cleaning wipes, gel capsules, or other types of detergents. The quantity of these devices is specified on the packaging, and they are added straight to the drum.

After you get the hang of it, turning on the Atlant washing machine is simple. You can quickly initiate a washing cycle and make sure your clothes are thoroughly cleaned by following a few easy steps.

Load your laundry first, then add the recommended amount of detergent. Next, choose the washing cycle that is most appropriate for your clothing. When everything is finished, hit the start button and let the machine work.

By following these simple instructions, you can operate your Atlant washing machine with ease and without stress, ensuring that every wash yields the best results.

Video on the topic

Washing machines ATLANT 01 series Soft Control

Review of the washing machine ATLANT 60U1010-00 6kg | Knob handle

Washing machines ATLANT 7 series Multi Function

Washing machines ATLANT 2 series Maxi Function

Review instructions washing machine Atlant 35m101

Washing machine ATLANT 9th series. Operating manual

Washing machine Atlant 50U107

Functions and programs of the washing machine

How often do you conduct maintenance of your washing machine (cleaning filters, drum, and t.d.)?
Share to friends
Dmitry Kuznetsov

Technical consultant and blogger. I have always been passionate about technology and enjoy learning how various equipment works. On this site I share my knowledge about washing machines, offer advice on caring for them and talk about new products on the market.

Rate author
FAQ-Washer.com
Add a comment