How to repair the shock absorber of the Indesit washing machine

There may be a problem with the shock absorbers if your Indesit washing machine starts to make odd noises or shakes more than usual when it is in the spin cycle. These necessary parts absorb the vibrations produced by the spinning drum, keeping your washing machine stable. They may become worn out with time, causing them to move and make noise excessively.

It’s not as hard as it sounds to fix the shock absorbers. You can avoid spending the money on hiring an expert by arming yourself with a few tools and fundamental knowledge. We’ll walk you through the procedures in this guide to locate the issue, get to the shock absorbers, and replace them if needed.

You can quickly restore your Indesit washing machine to operating smoothly and silently by following these easy instructions. Regardless of your level of experience, this guide is meant to give you the confidence to take on the repair.

First, we will analyze the detail

To fix shock absorbers on your own, you must have a thorough understanding of these specifics. Indesit’s washing machines are fitted with dampers, not shock absorbers, as opposed to many other brands’ machines. They are made up of a small metal rod, a plastic cylinder, two bushings fastened to the rod and cylinder, and a unique gasket that serves as a piston. The gasket, which actively wears out while the SM operates and ultimately loses all of its properties, usually needs to be replaced. This phenomenon occurs even when there is residual grease within the cylinder, thereby generating extra friction.

When a gasket fails, the damper loses its ability to function as a piston. This means that the rod is no longer contained within the cylinder and can start to move and occasionally fly out of it. Let’s look at a hypothetical scenario in which the gasket has already started to fail but is still able to function somewhat, preventing the rod from shooting out of the cylinder just yet.

In this case, the user should carefully disassemble and dismantle the damper to obtain the rod using his hands. Just take hold of the rod with your hands and pull it out of the groove to accomplish this. This is frequently very simple to accomplish because the rod becomes less resistant and can be easily taken out of its seat.

To ensure that it does not obstruct the removal of the element, you must first remove any plastic cover that has a screw thread installed on the rods of your automatic SM model. This cover prevents the rod from falling out of the cylinder.

If you find it difficult to remove the rod with your hands alone, you should wrap a small piece of cloth around the cylinder, clamp it in a vice, and then try to remove the part once more. If you pull it too hard, you run the risk of breaking the plastic components, which will need to be bought separately if they deform. The shock absorber is deemed disassembled as soon as the rod is taken out.

A malfunctioning shock absorber may be the cause of strange noises or excessive vibrations coming from your Indesit washing machine. This tutorial will show you how to identify the issue, remove the old shock absorber safely, and install a new one so that your washing machine can operate smoothly again. You can perform this DIY repair and restore your machine to like-new condition with a few simple tools and careful attention.

Removing and repairing the shock absorber

The process of disassembling the dampers themselves will be covered in detail in this section. If you discover that the shock-absorbing system is malfunctioning, you should not put off doing this step. The washing machine tank and the bearings may deteriorate over time if you choose to ignore the issue and keep things as they are. However, the chance of this happening is almost eliminated if you replace the shock absorbers on time.

The actual repair is fairly easy. It is even possible for someone with no prior experience to repair household appliances. This is because, in most cases, replacing the deformed gasket is the only thing that needs to be done. How can I take the unit apart partially, take out the dampers, and replace the broken spare part?

• Disconnect the Indesit washing machine from the power supply, water supply and sewerage.
• Move the device away from the wall to gain free access to all sides.
• Remove the bolts holding the machine cover, then remove the top panel and put it aside for a while.
• Remove the powder receptacle.
• Carefully disconnect the control panel.
• Remove the UBL.
• Loosen the clamp on the rubber hatch seal, and then tuck the cuff into the drum.
• Dismantle the front panel of the SM.
• Remove the dampers.
• Disassemble them and carefully examine the gaskets.
• If they need to be replaced, prepare spare parts made of textolite or rubber.
• Install the elements in the seat.

It’s best to take a picture of the washing machine after every step so you have reference material for when the appliance needs to be correctly reassembled.

Regretfully, changing the gasket alone isn’t always enough to get the damper operating normally again. To properly dampen the vibration of household appliances in this situation, replacing the failed damper alone won’t be sufficient; you’ll need to purchase two dampers at once. If you replace just one component, the shock-absorbing unit will deteriorate more quickly and require maintenance once more.

The dampers need to be taken out of the seats in order to be replaced. They can be readily removed from the washing tank or firmly fastened to it, depending on the device. The second option is better because in this instance, removing the case’s front panel, replacing the old dampers, and leaving them in place is sufficient. You will need to partially disassemble the CM, though, if the parts cannot be disconnected without the washing machine tank.

• Disconnect the device from all communications.
• Remove the case cover, the cuvette for household chemicals, the control panel, the upper springs and the front panel.
• Remove all pipes, sensors and devices from the washing tank.
• Carefully remove the tank.
• Disconnect the damaged dampers to install new spare parts in their place.

After restoring the shock absorber unit, take your time assembling the machine because you can still examine other important components, such as bearings, a crosspiece, and a drain, in the disassembled form. This will enable you to research and replace the part in advance rather than waiting for it to break completely. Use WD-40 technical lubricant if you discover a significant obstruction or scale formation with rust. It works well in this and a number of other unpleasant circumstances. The Indesit washing machine only needs to be assembled and tested with a test work cycle after maintenance.

Although it may seem difficult, you can do the repair of an Indesit washing machine’s shock absorber at home if you have the correct instructions. In order to keep your machine operating smoothly during the washing cycle, the shock absorbers are essential. Your machine may become noisy or even start moving while in use as they begin to wear out.

To start fixing this problem, carefully remove the outer panels of the washing machine so that the shock absorbers are accessible. When you’ve found it, look for damage or wear indicators. If they need to be replaced, it’s critical to obtain the appropriate parts for your particular model. Usually only a few bolts or screws are needed for installation, so go slowly and make sure everything is firmly in place.

Reassemble the machine after the repair to make sure the vibrations have decreased and everything is working as it should. You can maintain the efficiency and lifespan of your washing machine by following these easy steps. Future problems that are larger and more expensive can be avoided with timely repairs and routine maintenance.

Video on the topic

Destroying the myth about repairing washing machine shock absorbers

Repairing Ariston/Indesit washing machine shock absorbers. Step by step

Repairing a washing machine shock absorber.

How to check and repair the shock absorbers of a washing machine

How to replace shock absorbers in an INDESIT washing machine