You may need to remove the detergent tray from your Ariston washing machine if you’ve ever experienced problems with it. It’s a typical task, particularly when troubleshooting an issue or when it’s time for a thorough cleaning. Although it may appear difficult at first, once you know the steps, removing the tray is actually a simple process.
We’ll walk you through the easy process of taking the tray out of your Ariston washing machine in this guide. From the initial setup to the actual removal, we’ll go over everything and make sure you understand every step. This guide will assist you in doing it safely and effectively, regardless of whether you need to access the area for maintenance or are dealing with a detergent buildup.
You can confidently tackle the task if you adhere to these simple instructions. Let’s examine how to remove the detergent tray and maintain the proper operation of your washing machine.
| Step | Instructions |
| 1 | Open the washing machine door and locate the detergent drawer. |
| 2 | Press the release button or lever (usually found at the back of the drawer). |
| 3 | Gently pull the tray out of the compartment. |
| 4 | Clean the tray under warm water to remove any residue. |
| 5 | Let the tray dry completely before reinserting it. |
| 6 | Slide the tray back into its slot until it clicks into place. |
An Ariston washing machine’s tray can be easily removed, which makes maintenance and troubleshooting easier. Make sure the machine is turned off and unplugged before beginning. To remove the detergent drawer from the machine, gently pull it out until it stops, then press down on the tab or latch inside. Remove the tray carefully, being cautious not to harm any internal parts. Maintaining a clean tray can help your washing machine work better and avoid problems like clogs and smells.
- Mechanics of removing the tray
- How to properly wash the powder drawer?
- Video on the topic
- How to remove the powder tray from the Ariston washing machine
- HOW to remove the TRAY from ANY WASHING MACHINE//HOW to remove the TRAY from a SAMSUNG MACHINE//HOW to clean the TRAY
- How to remove the tray from the Ariston washing machine
- How to remove and insert the washing machine tray
- How to remove the detergent tray in the Hotpoint-Ariston RST 602 ST S washing machine
- How to remove the tray on the Hotpoint-Ariston washing machine
- How to remove the detergent tray in the Hotpoint Ariston washing machine
- how to remove and wash the tray of the Hotpoint-Ariston washing machine
Mechanics of removing the tray
Unlike other machines, the Ariston "home assistant" only allows you to remove the powder receptacle in an arc, not by pulling it in your direction. In addition to not coming out of the grooves because the clamps will obstruct it, attempting to pull the part strongly in your direction runs the risk of breaking it. To stop this from occurring, make sure you adhere to our instructions.
- Pull out the powder receptacle to the maximum permissible length.
- There is a small latch next to the base of the tray on the right – it is important to pull the right part of the compartment so that the latch works, and the right part of the tray begins to dangle.
- At this stage, you do not need to touch the left part of the tray, instead you need to carefully pull out the central part of the compartment. Because of this, the front part of the tray will remain in place, and you will be able to remove the drawer with compartments for household chemicals.
Although this may sound like a difficult procedure in writing, it only takes a few seconds to complete. Once you’ve done it once, you’ll understand the basic idea behind it and be able to quickly repeat it if needed. Remarkably, it is much simpler to replace the powder receptacle than to remove it. To accomplish this, locate the tray’s right side groove, slide it into the guide, and then push the component back into place.
How to properly wash the powder drawer?
Any household appliance that is not properly maintained will have a much shorter service life than what the manufacturer has promised. This also applies to the detergent drawer, which is why it needs to be routinely cleared of household chemicals. This should ideally be done after every work cycle, as cleaning will then be simple. Remove the tray and give it a thorough rinse under a strong stream of hot water to eliminate any remaining powder, gel, conditioner, or other detergent in such a scenario.
Plaque and even mold may grow on the powder container if it is not cleaned for a few months. If this occurs, washing the component by hand will no longer be sufficient; instead, you must give it a thorough cleaning as described below:
- buy a special sponge with an abrasive surface;
- mix water with baking soda in a glass in a 50 to 50 ratio;
- pour the resulting solution into the powder receptacle and leave it there for several hours;
- wipe the walls of the tray with a hard sponge to remove all dirt.
You can also use a soda and nine percent vinegar solution in addition to the water and soda method. Additionally, this mixture will work well to remove any mold-related plaque. This requires you to fill the tray with 200 milliliters of vinegar for every liter of boiling water, and then you must let the part soak for at least six hours. After this process, a standard rag will be able to remove all of the dirt.
Finally, vinegar and soda can be substituted with citric acid. Pour acid into each section of the powder container and turn on the high-temperature working cycle to accomplish this. The fact that there are currently no clothes in the drum is crucial. It is best to do idle washing at a temperature higher than sixty degrees Celsius to ensure that all of the mold and plaque is removed when the task is finished.
After every work cycle, rinse the detergent dispenser and remember to leave it open for a few hours to allow all of the moisture to evaporate.
Select any of the outlined techniques to effortlessly clean your preferred "home assistant’s" powder container. However, it is far preferable to wash the tray after every wash and prevent dirt from collecting. Additionally, you can use napkins to wipe dry each compartment on the tray as an extra precaution.
Once you know the procedure, removing the tray from an Ariston washing machine is a simple task. It’s an essential component of machine maintenance because it guarantees that fabric softener and detergent are dispensed correctly. Cleaning the tray on a regular basis keeps your washer operating smoothly and helps avoid clogs.
Start by carefully extending the tray to its maximum length. Look for any clips or levers that might be holding it in place if it’s stuck. After releasing it, give it a quick rinse in warm water to get rid of any leftovers. Use a soft brush to scrub away tenacious buildup for a deeper clean.
Make sure the tray clicks firmly into place as you reassemble it by sliding it back into its slot. You can maximize the performance and lifespan of your Ariston washing machine by routinely removing and cleaning the tray. Maintaining this small home improvement project will have a significant impact on how well your laundry routine works.
