How to remove the impeller from the LG washing machine?

It’s possible that you had to take out the impeller from the pump if your LG washing machine ever gave you problems. When handling pump blockages or malfunctions, this is a typical task. The impeller, a tiny but vital component that aids in pumping water, can occasionally become clogged or stuck.

We’ll walk you through the steps in this guide to remove the impeller from the pump in your LG washing machine. We’ll simplify each step as much as we can by breaking it down. Whether you’re a do-it-yourself enthusiast or just trying to cut costs on repairs, knowing how to approach this problem can really make a big difference.

Everything you need to know will be covered, including the tools you’ll need and how to safely remove and replace the impeller. Now put on your sleeves and let’s see if we can restore your washing machine’s functionality!

This guide will take you through the easy process of safely removing the impeller from your LG washing machine pump if it is proving to be stubborn. Everything will be covered, including the tools you’ll need and how to handle the impeller without harming the pump or it. You can solve the issue and restore your washer to optimal functioning condition by adhering to these simple instructions.

Remove the pump

The impeller needs to be fixed carefully; it will take at least an hour. However, there are no risks because the pump will eventually need to be replaced. You have to take the washing machine’s pump out before you can reach the screw. It is connected to the nozzles, drain hose, and snail and is housed in the machine gun’s lower section. This is how it is disassembled in order:

De-energize the device and unplug it from the water supply before disassembling the pump!

• Disconnect the washer from communications;
• drain the water by unscrewing the garbage filter;
• remove the powder receptacle (pull it all the way and, holding the central latch, remove it from the recess);
• lower the machine onto its left side;
• find the pump;
• disconnect the wires and hoses connected to the pump;
• turn the pump clockwise;
• remove the device from the grooves.

The Aquastop system on the LG washing machine model must be turned off before proceeding. To accomplish this, unscrew the retaining bolts and unplug the power wire from the float. After removing the pump, set it down flat with the impeller facing up.

Pull off the broken impeller

The plastic impeller needs to be removed in the second step. You have to adhere to the instructions to replace the broken plastic with a new one. The following is the algorithm:

• cut off part of the plastic from the tip of the impeller (use a hacksaw);
• pull the base out of the pump together with the blades;
• fix the dismantled base in a vice;
• take two slotted screwdrivers;
• Place the screwdriver on the bottom of the screw and press the impeller several times, moving from bottom to top.

It is necessary to raise the impeller gradually; you cannot apply too much pressure to the plastic. The entire system will spin as a result of its base "flying off" from the fastener and exposing the shaft. The most important thing is to avoid going overboard, as this could strip the axis threads and render further repairs meaningless.

To free rusted and stuck parts, use WD-40 cleaner.

The rod shaft from the pump needs to be removed next. After removing the screws from the tabletop, flip the vice over, and tighten the clamps. They have the pump fixed, or more accurately, its disassembled axis. The following are the additional instructions:

• take a screwdriver proportionate to the diameter of the shaft seat;
• insert the screwdriver into the mentioned hole;
• tap the rod with a hammer (light but increasing blows).

The shaft will stay clamped in the vice after tapping, and the remainder of the structure can be simply disassembled into its component pieces. However, it is not necessary to replace the impeller right away, and reassembling it is not worthwhile. It is advised to thoroughly inspect the pump and remove any debris or scale before using it. Pay close attention to the axial rubber right away. It usually wears out a lot because of the blades’ rotation. Should the cuff sustain significant damage, it ought to be replaced.

Create a solid base

It must rebuild its solid base before putting the impeller back in its place. Following that, the structure can be put back together. The following is the general order:

• insert the shaft into the new plastic impeller (in order for the part to "sit" more tightly, you should press it with a screwdriver);
• treat all rubber seals with lithol;
• insert the shaft with blades into the rubber ring;
• clean the "nest" for installing the impeller;
• install the shaft with blades in the "nest" (they should be magnetized to the pump);
• lubricate the top of the impeller with sealant (where it was previously cut off).

Make sure to use sealant when changing the impeller; if not, water will seep into the pump and cause it to break.

The drainage device will require sixty to ninety minutes to disassemble and reinstall. Assembling the parts with tools beforehand and researching the pump’s and its rotating element’s design beforehand will speed up the process.

Although removing the impeller from an LG washing machine’s pump may seem difficult, it can actually be a simple task if done correctly. First, unplug the machine from the power source and empty out any leftover water. This guarantees security and avoids any mess while working.

Next, access the pump by usually taking off the machine’s back cover or front panel. Find the impeller and gently take it out of the pump. Based on the model, you may need to pry it off or unscrew it. Take care not to damage the parts by handling them gently.

Examine the impeller and the surrounding pump parts for wear or debris after removing them. Your washing machine’s efficiency can be sustained by occasionally cleaning or replacing these components. Make sure all the parts are firmly fastened as you carefully reassemble everything.

Test the washing machine after the impeller has been replaced to make sure it is operating correctly. By following these steps, you can maintain the smooth operation of your machine’s pump and address any problems that may arise. For complete peace of mind, look up specific details in the handbook that came with your machine or, if necessary, seek professional advice.

Video on the topic

Household tricks. Washing machine pump repair.

Washing machine pump repair.

replacing the impeller of the washing machine pump (how to remove ?)

REPLACING THE IMPELLER WITH ROTOR FROM THE WASHING MACHINE PUMP AND IS IT WORTH DOING!

Atypical breakdown of the washing machine pump. Impeller breakage.

How to remove the impeller on the washing machine