How to remove the drum in the Atlant washing machine?

Although disassembling your washing machine may seem difficult, there are situations in which it is required, particularly if you need to access the drum. This step-by-step guide will help you remove the drum from your Atlant washing machine if you own one. Removing the drum is a task you can accomplish with a little perseverance and the correct tools, whether you’re working on a repair or are just interested in learning more about how your machine operates.

It is important to make sure you are safe before you dive in. Before starting any work, make sure the washing machine is unplugged and disconnected from the water supply. By doing this, any unintentional electric shocks or water damage will be avoided. Also, collect all the tools you will require, including pliers, screwdrivers, and maybe a wrench. Having everything ready will facilitate a less stressful and more seamless process.

When you’re prepared, begin by taking off the washing machine’s front and rear panels. You’ll be able to access the internal parts, including the drum, this way. Even though it might seem complicated, if you take your time and pay close attention to the instructions, you can prevent mistakes. You’ll get closer to the drum with each panel you remove, which will help you comprehend how your washing machine works from the inside out.

Since the drum is usually held in place by a drive belt and a number of bolts, removing it yourself will take some more work. Gently remove these parts, making a note of where they go so you can put everything back together later. You can lift the drum out and carry out any necessary repairs or maintenance after it is free. By the time you finish this process, you’ll have learned a lot about the inner workings of your Atlant washing machine in addition to having removed the drum.

Collecting everything you need

You have to get ready for the fix. You should choose a location first. You’ll need enough room to dismantle the washing machine calmly. The washing machine should ideally be moved from a small bathroom to a large room, or better yet, taken to a garage, workshop, or barn. Dry rags should be used to cover the area where the automatic machine is disassembled before dragging the apparatus there.

Regarding the tools, you will require the following to remove the drum:

• Phillips and slotted screwdrivers;
• hammer;
• chisel;
• set of keys;
• WD-40 aerosol;
• lubricant for washing machine elements.

An extra repair kit is ready, depending on why the drum needs to be removed.

In the event that you need to replace the seal and bearings, you should first determine which parts are available in Atlanta and then purchase new parts from a specialized retailer. Purchasing original components is advised. Bearings and a seal—a rubber seal that keeps water off the metal ring—will be included in the repair kit. You can start disassembling the machinery as soon as you have everything ready for the next washing machine repair.

Although taking the proper steps to remove the drum from an Atlant washing machine can seem difficult, anyone with a basic understanding of do-it-yourself tasks can handle it. This tutorial takes you step-by-step through the entire process, from unplugging the machine to reaching the internal components to securely taking out the drum without breaking anything else. You can prevent costly repairs and maintain the optimal operation of your washing machine by adhering to these simple instructions.

Disassemble the top of the case

De-energize the washing machine and unplug it from the home communications before beginning disassembly. Make sure you use the garbage filter to drain any leftover water from the system. The following will be the subsequent action algorithm:

• press the central latch, remove the powder receptacle from the machine;
• unscrew the bolts securing the cover of the unit;
• remove the top panel;
• unscrew the four screws on the transverse metal bar;
• using the Torx key, unscrew the counterweight retainer, remove it from the case;
• unscrew the fasteners of the "bunker" for detergents, unfasten the pipe from it, take out the dispenser;
• disconnect the pipe from the tank, having previously loosened the fixing clamp.

As a result, the tank’s upper portion will be "cleaned" of numerous components. Releasing the unit’s back wall is the next stage of disassembly. See what needs to be done next.

Open the technical hatch

You will now need to operate the Atlant washing machine’s rear. It is imperative that the machine’s back wall be removed. This will provide access to the motor, drive belt, pulley, and other components that need to be disassembled. Here are the directives for taking action:

• unscrew the bolts along the perimeter of the rear panel, dismantle it;
• throw off the belt from the “wheel” of the drum;
• disconnect the wires from the heating element;
• disconnect the motor wiring, unscrew the bolts and pull the engine out;
• loosen the clamp of the drain pipe, disconnect the hose from the tank;
• disconnect all the wires attached to the “tank-drum” unit;
• unscrew the bolt securing the pulley, remove the drum "wheel".

Apply WD-40 aerosol liquid to the pulley’s central bolt if it continues to resist.

Removing the shock-absorbing spring fastenings is the next task. Nothing will therefore prevent the drum from being removed from both above and behind. It will continue to function exclusively with the washing machine’s front wall.

Although taking out the drum from an Atlant washing machine can seem difficult, it’s a task that can be completed with the correct equipment and direction. You can safely disassemble the machine and gain access to the drum without causing any damage if you carefully follow the instructions provided in this article.

Prior to beginning, don’t forget to unplug the washing machine, and proceed slowly at each step. To guarantee a seamless reassembly, keep track of the screws and parts. It is always advisable to seek professional advice if you are unsure about anything in order to prevent costly repairs down the road.

You can keep your Atlant washing machine in good operating order for many years to come by knowing how to do the necessary maintenance or repairs on it. You can successfully remove the drum and take care of any issues with your appliance if you have a little patience and care.

Video on the topic

How to easily remove the spring on the drum of the washing machine.

Atlant. Atlant replacement of bearings. Review of a modern washing machine

Replacing the drum rib of the Atlant washing machine – do it yourself

HOW TO REPLACE A BEARING IN AN ATLANT WASHING MACHINE. WATCH EVERYONE!!!

Repair of the Atlant 45u102 washing machine. Replacing the drum bearing. Part 1. Disassembly.

Atlant washing machine nuances how to remove the drum and assemble..Drum cleaning..

Drum disassembly and bearing replacement in washing machines. .

how to easily remove the Indesit tank