How to disassemble the drum of a Beko washing machine?

If your Beko washing machine has ever given you problems, you may need to disassemble the drum for a more thorough inspection or repair. Although taking apart the drum can seem like a difficult task, it’s actually fairly manageable with some help. In order to access the inner workings of your machine and address issues such as leaks, mechanical failures, or drum noise, you will need to follow a few steps in this process.

Knowing how to disassemble the drum correctly can help you save time and possibly even prevent expensive service calls. We’ll guide you through the process of disassembling a Beko washing machine drum step-by-step in this article. We’ll go over everything, from assembling the necessary equipment to properly reassembling everything, to ensure you feel comfortable taking on the task on your own.

It’s critical that you understand the machine’s design and the functions of each part before beginning the process. We’ll clearly explain each step and provide advice to make sure you complete each carefully. By the time you’re done, you ought to be able to easily disassemble the drum of your washing machine and resolve any problems that may arise.

What you will have to face?

It is worth stating the extent of the task and being aware of the obstacles before beginning to disassemble. Thus, the bearing unit is responsible for ensuring that the drum rotates while the motor’s impulse is transmitted through the shaft. The bearings in the washing machine deteriorate more quickly than other parts because of the high load, which makes it challenging to spin the mechanism. You will have to swap out the worn-out components in order to remedy the situation.

Because the bearings are situated on the drum cover, this presents a challenge. You will need to cut the tank in half in addition to almost completely disassembling the washing machine in order to reach the problematic area. Owners of Beko equipment face an even greater challenge because these units have single-piece tanks that are beyond standard repair.

Because the tanks on Beko washing machines are made of one piece, disassembling them calls for a metal saw.

Conventional methods cannot be used to disassemble a one-piece tank. As a result, repair shops charge a premium for replacement and frequently suggest fully disassembling the damaged unit and replacing it with a functional one. Generally speaking, the cost of "exchange" is between 50 and 70 percent of the washing machine’s purchase price. You could also choose to spend even more money and purchase a new washing machine.

You can attempt to fix the problem yourself if you don’t have enough money to purchase a new tank or an entire machine. The non-separable tank must be cut with a metal saw, the bearings must be changed, and everything must be glued back together. Even though it takes a lot of work, you can save a lot of money. Made a decision? Next, we provide recommendations and detailed instructions.

Prepare thoroughly

If you have made the decision to perform the repair yourself, it is important to plan ahead. First, gather or purchase the bare minimum of tools that are required. Thankfully, the list is commonplace:

• a set of screwdrivers (flat, Phillips and indicator);
• a saw or hacksaw for metal;
• pliers;
• combination pliers or flat-nose pliers;
• a set of open-end wrenches (8-18 mm);
• a set of heads;
• a puller (a car version will do);
• end wrenches;
• hammer;
• awl;
• chisel;
• multimeter.

We start by gathering the tools and getting the workspace ready. You can work here if the washing machine is situated in a roomy bathroom. If turning around is difficult in small spaces, consider using a hallway, kitchen, workshop, or garage as an alternative. It will be difficult to disassemble the machine if there aren’t at least two free square meters available. We typically behave as follows:

• disconnect the machine from all communications (electricity, sewerage, water supply);
• move the washing machine to a place convenient for repair;
• cover the space around the equipment with oilcloth, rags or newspapers;
• pull the detergent tray out of the housing by pulling it towards you;
• unscrew the garbage filter and drain the residual water from the tank.

The machine needs to be de-energized and unplugged from the water and sewer supplies before it can be disassembled!

It is advised to designate a distinct area for small parts, such as clamps, screws, bolts, and other fasteners, for ease of use. We move on to the direct troubleshooting after finishing the setup.

It is crucial to take it step-by-step when disassembling the drum of a Beko washing machine in order to prevent any damage. You will be able to safely disassemble the drum by following this guide, which will cover everything from unplugging the machine to removing the front panel and handling the internal parts. You’ll be able to tackle the task with confidence and get your washing machine back in working order if you have clear instructions and helpful advice.

Removing the tank with disassembling the machine

You will need to disassemble the machine nearly entirely in order to reach the tank. Everything is actually not that scary; all that is needed is the knowledge of what to do and when to do it. Thus, disassembly starts with the fundamentals:

• remove the top cover of the case by unscrewing the retaining bolts at the back and pulling the panel forward and up;
• remove the "back" by unscrewing the corresponding clamps;
• unhook the drive belt from the pulley;

The bearings are harmed if the wall behind the pulley has oil or rust stains on it.

• remove the heating element from its seat, having first disconnected the supplied wiring.

Though skilled artisans advise against taking a chance, it is theoretically possible to disassemble the washing machine down to the tank without removing the heater. In actuality, neglecting to remove the heating element frequently causes harm to the latter, such as contacts breaking or the "spiral" becoming distorted. Instead of attempting to save time, it is preferable to safeguard yourself against having to replace an expensive part later on.

The electric motor is the next in line. In order to remove it from the washing machine, we must also disconnect the motor’s supply line, loosen the bolts, swing the component, and pull it in your direction. We take great care to ensure that the engine’s tacracker is not damaged.

Now let’s discuss the "upper" portion, or more accurately, the counterweights. These concrete blocks are placed above the drum to reduce the force of centrifugation that is generated by it. It is simple to remove the stones from the machine; simply unscrew the retaining bolts with an end wrench and take out the concrete. Remember its weight, though, and it’s best to get assistance by calling someone.

It’s time to take the dashboard off. The following guidelines are followed in doing this:

• unscrew 2-4 bolts located next to the powder receptacle;
• loosen another clamp located on the left side of the case;
• remove the board from the plastic latches by lifting the panel up;
• disconnect the wires leading to the inlet valve;
• hook the removed panel onto the service hook or put it aside.

Next, notice the hose at the inlet. The powder receptacle niche and the inlet valve are located next to it; both must be taken out of the housing. It’s really easy: we just use a screwdriver to push the clamps and disconnect the wiring and summarized pipes.

It is also necessary to remove the pressure switch from the apparatus. To accomplish this, remove the holding screws, unhook the wires from the "washer," and carefully remove the plastic tube from the tank. There’s no need to rush because the part is brittle and easily broken by abrupt movements.

Proceed to the hatch and remove the clamp that is securing the rubber seal. After that, switch off the UBL and tuck the cuff inside the drum. After that, flip the washing machine over. The explanation is straightforward: since the majority of Beko models lack trays, accessing the drain system via the "empty" bottom is simpler. Here, take off the drain pipe, the clamps, and the fasteners. An end wrench can be used to twist the shock absorbers. That’s it; you can now start sawing the tank by putting the machine back in a horizontal position.

Divide the tank into two halves

The tank must be removed because it cannot be sawed inside the machine. It is best to get an assistant because this unit is heavy even though it looks light. Then, take hold of the drum’s edges, swing the container to one side, raise it a little, and pull it in your direction. The tank ought to shift out of the seat.

Examine the tank after you’ve freed it. Make sure the container is cast in one piece and that this manipulation is truly necessary. If so, we begin our task:

• prepare a place for cutting: put a car tire, which will increase stability;
• put the tank vertically on the tire, with the seam facing up;
• take a saw or hacksaw for metal and cut the tank in half strictly along the seam.

It is imperative that you proceed with extreme caution because even the smallest side deviation will impact the container’s future tightness. Once the cutting is complete, take off the top section of the tank and flip the bottom one over. Since the bearings are "hidden" directly beneath the shaft, we can move on to the next step, which is to remove the "rings" and seals.

Although disassembling a Beko washing machine’s drum might seem difficult, it’s actually fairly doable if you follow the right instructions. First, disconnect the computer and collect the required equipment. To remove the drum, carefully follow the instructions, being mindful of every connection and component. To ensure that there is no confusion during reassembly, be sure to keep track of screws and components.

It’s essential to handle every component of the drum carefully when working on it to avoid damage. The washing machine’s manual can offer more assistance if you’re not familiar with certain parts or processes. Always put safety first by making sure the machine is fully unplugged before operating.

After the drum has been successfully disassembled, you should take this chance to clean up any accumulated debris or look for any damage. The disassembly procedures must be repeated in order to reassemble the drum. Verify each connection twice to make sure everything is safe. You can restore the smooth operation of your Beko washing machine by being patient and paying close attention to details.

Video on the topic

Replacing Beko bearings in 3 minutes

BEKO. Beko bearing replacement. Washing machine review.

Repair of the BEKO washing machine. How to properly disassemble!!!

Replacing bearings in a BEKO washing machine (Part 1)

How to disassemble a BEKO washing machine preparing to replace bearings!

How to disassemble a Beko washing machine. Changing the bearings in the drum.

How to replace bearings on a BEKO washing machine