Error F54 on a Gorenje dishwasher

If you have a Gorenje dishwasher, you may have seen a confusing and annoying error code on the display. F54 is one such error that can make the dishwasher stop functioning properly. You can avoid wasting time and money on pointless repairs by being aware of what this error means and how to resolve it.

A Gorenje dishwasher’s error code F54 usually indicates an issue with either the water circulation system or the motor. This error typically indicates a problem with either the water flow or the motor’s ability to function properly. Fortunately, you can troubleshoot and solve the issue on your own by following a few simple steps.

We’ll go over the most frequent causes of the F54 error in this article and provide simple steps to fix them. Regardless of the nature of the problem—a basic blockage or a more complex one—we’ll assist you in getting your dishwasher back up and operating efficiently.

List of possible malfunctions

In a Gorenje dishwasher, strange error F54 is always the result of drain issues. This could be the result of a common blockage or a malfunction of one of the dishwasher’s essential parts. You need to examine each of the potential causes of the malfunction before deciding what to do.

• The user accidentally bent the drain hose, due to which the water physically cannot go into the drain. In this case, it is enough to simply straighten the sleeve and try to start the working cycle again. This happens very often, so you should not exclude this option.
• The coarse filter is completely clogged, so the waste liquid simply gets stuck. To prevent this, you must always pre-clean the dishes from food residues, bones, tea bags, napkins, toothpicks and other debris. This will eliminate the risk of filter clogging in the future, so that water always flows freely from the tank.
• The drain section is clogged. This also happens due to food debris and other contaminants that could pass the garbage filter, but block the pipe, drain hose or pump.
• The pump is out of order.
• The water level sensor is broken.
• The control board of the Gorenje dishwasher is damaged.

Experts always advise beginning the examination with the most trivial issues and working your way up to more significant harm. This will enable you to avoid wasting time in the event that a straightforward issue that doesn’t need intricate fixes or replacements was the cause of the error code.

We clean the machine, change the pump

The equipment must first be disconnected from all communications if the error F54 shows on your computer’s display. Next, check the apparatus for obstructions, beginning with the drain hose, which clogs most frequently. In order to accomplish this, unplug the hose from the sewer, drop it into a container or bathtub, and see if any water comes out. If it does, there is a blockage in the sewer or siphon. If the waste liquid does not escape, the blockage in the household appliance needs to be checked. First, let’s clean the filters.

• Open the door of the machine.
• Remove all the baskets for dishes.
• Remove the cover of the trash filter located at the bottom of the washing chamber.
• Take out the filter cup, and then the filter mesh.
• Rinse the filter elements under a powerful stream of hot water.

If any dirt has gotten inside the components, you can clean them with an old toothbrush and a citric acid solution, which you can leave the filters in for a few hours.

• Open the pump cover and carefully test with your finger whether the impeller rotates, which could also contain debris, as well as broken dishes, if they broke during washing.

The next step is to put everything back in its proper place and test the machinery during an idle start. In order to access the internal parts of the Gorenje dishwasher, you will need to partially disassemble the apparatus if all other attempts at manipulation prove unsuccessful. Starting with the pump, let’s.

• Drain all the waste liquid from the dishwasher, which can be done manually by scooping out the water from the tank, or by tilting the "assistant" forward to pour out all the water.
• Remove the drain filter.
• Turn the household appliance over on its back to remove the tray, fixed with screws.

Never force the tray to be removed because, on some Gorenje dishwasher models, the tray has an Aquastop sensor attached to it that needs to be removed by unplugging all of the wiring.

• Disconnect the sensor, if there is one.
• Remove the tray.
• Unscrew the pump, removing all the hoses from it.
• Examine the impeller – does it rotate without problems. If not, then you will have to buy a new part and install it in place of the broken one.
• Measure the resistance of the element by connecting the probes of a simple multimeter to it. Normal resistance will be around 200 Ohms.
• Additionally, you can check whether voltage is supplied to the pump from the control module of the Gorenje dishwasher.

If the pump is truly broken, the only option is to replace it—ideally with an original spare part—to prevent the machine’s performance from being compromised by a subpar component.

When a Gorenje dishwasher displays error F54, the circulation pump is likely having issues. The reason behind this problem could be a blockage or malfunction in the pump’s motor, which is preventing the water from passing through the dishwasher in an appropriate manner.

The first step in fixing this error is to look for any obvious impediments in the pump area. Eliminating any foreign objects or debris could potentially resolve the issue. Should that prove ineffective, you may need to examine the pump motor or seek assistance from a professional.

You can prevent expensive repairs and save time by learning what Error F54 means and how to troubleshoot it. Careful use and routine maintenance can help avoid these problems before they arise.

When a Gorenje dishwasher displays error F54, there is typically a problem with the water flow system. This could be the result of a kinked hose, a clogged filter, or a water pump issue. Without having to contact for expert assistance, users can promptly fix the problem and get their dishwasher operating normally again by being aware of the causes and learning how to troubleshoot this error.

Video on the topic

Dishwasher dishwasher constantly drains pumps out water. Dishwasher repair

E54 Error on Gorenje Dishwasher | How to fix

What to do if the Gorenje dishwasher does not work | Gorenje.

Gorenje dishwasher does not collect water DIY repair

How to fix F54 error and repair your dishwasher. Service error F54.

Dishwasher, overflow of water and possible causes