Ardo washing machine does not turn on – washing does not start

It can be annoying and inconvenient if your Ardo washing machine abruptly refuses to turn on or begin a wash cycle. Because you depend on your washing machine to keep your clothes fresh and clean, it’s critical to investigate any issues that may arise.

Your Ardo washing machine might not be powering up or initiating the wash for a number of reasons. While some problems might be straightforward and simple to resolve, others might need further research. Gaining an understanding of the possible reasons for the issue can aid in troubleshooting and restore your machine’s functionality.

We’ll look at common causes of your Ardo washing machine not turning on or initiating a wash cycle in this article. We’ll also offer some advice on how to deal with these problems so you can easily resume your laundry schedule.

Reasons

It won’t be possible to figure out why the washing machine stopped working right away. This calls for an equipment inspection. Both the device’s internal and external components should be given equal consideration at the same time. For instance, the following are the main causes of the functionality’s absence:

• Problems with the electrical network. This includes malfunctions of machines, sockets, extension cords.
• Deformation of the power cord or plug.
• Overheating of the FPS – network capacitor.
• Faulty door lock.
• Overheating of the start button contacts.
• A failure of the control module can also be the cause of the breakdown.

The first two reasons are referred to as "childish" by most technicians, and they are easily solved. But a lot of housewives get so worked up that they are unable to look at the situation calmly; to them, a malfunction of this magnitude is quite serious.

For the next three reasons, a detailed examination and hands-on repair are necessary. Thus, for instance, if the door malfunctions and the indicators don’t burn, the replacement process can be completed promptly enough.

The final and most important reason is the most complex. It is important to examine each case independently.

Small breakdown

If Ardo is not turning on, you should examine the method for any potential damage or malfunctions. It is essential to begin with the most basic justifications listed in paragraphs 1 and 2 above.

Throughout the inspection, the washing machine is left in place. Initially, in the event that the Arduino device is unresponsive, you must take the subsequent steps.

• Check the outlet. To do this, you need to remove the plug from the outlet, connect another electrical appliance to it. The method of checking is quite simple. The socket is considered broken if the connected device refused to turn on.
• If the socket works, you need to check the extension cord where the Ardo machine cord is connected. The method of checking is the same as above.
• The next element of the inspection will be the power cord. If damage to the insulating layer was found, and traces of melting were noticed, then the cord must be replaced. Its further operation is impossible. Otherwise, this may lead to the fact that the Ardo machine will stop turning on and working.
• Finally, if you could not see the damage, you can check the wire with a multimeter. To do this, you must first set the device to the minimum resistance value, and then touch the probe to one of the teeth (usually the right one) of the plug. The standard resistance value for the Ardo machine is 2 Ohm. Any deviation indicates that the plug needs to be replaced.

It’s also important to remember that fixing network cable flaws on your own is not advised if they are found. It is best to enlist the assistance of experts who can evaluate the damage and take all the required steps to get the Ardo machine to turn on once more. For instance, workers can quickly swap out the plug or replace the wire insulation.

Malfunction of the network capacitor

Issues with the FPS can occasionally prevent the washing machine from starting up. This acronym refers to a network capacitor or interference filter.

Installed inside the washing machine, the element is a semiconductor structure designed to suppress small interference. It’s no secret that practically all electrical networks occasionally experience disruptions in their operation. They are brought on by the same interference, which the FPS blocks from having any impact on the washing machine. This guarantees that all components and equipment operate dependably.

If you look inside the Ardo washing machine, you can find the FPS at the end of the power cord. The filter will need to be changed if it breaks. This operation can only be carried out following the removal of the machine’s top cover.

You must pull the component in your direction and unscrew two bolts in order to remove it. Beneath the cover are a wire and a capacitor. It is advised to take the structure outside and disconnect all wires that are connected to the capacitor.

A multimeter is also used to measure the filter’s performance at minimum resistance values. If the device displays a quick increase in the indicator to one, it is possible to assess the element’s serviceability. During the check, if the numbers 1 or 0 show up right away, the capacitor needs to be changed.

You’ll need to purchase a new filter and install it in its place to replace the old one. After attaching the new capacitor to all required wires, the cover is screwed back on.

If the capacitor was the exact source of the washing machine issue, replacing it will ensure that the appliance functions correctly as soon as it is connected to the network.

Breakdown of the device"s power button

A broken power button is another possible reason why the Ardo washing machine won’t turn on. The equipment’s advanced age is frequently the cause of the issue. Among the other most well-liked explanations are:

• Wear of contacts. In this case, the breakdown occurs gradually. At first, the indicators light up periodically, and then completely stop responding to any action.
• Water ingress. Liquid can penetrate inside the button, which will cause overheating of the electrical circuit responsible for the operability of this element.
• Oxidation of contacts. The problem occurs as a result of excess moisture. Therefore, special attention should be paid to such a moment.

You have to take out the washing machine’s control panel before you can fix the button. To accomplish this, you’ll need:

1. Remove the top cover by unscrewing all the nuts and bolts.
2. Inspect the button contacts and check their functionality using a multimeter. The check is carried out in the same way as described earlier. In this case, you should also pay attention to the appearance of the numbers 1 or 0.
3. Remove the button if any defect was detected. Most cases require the use of a soldering iron.
4. Install a new button in the same place.
5. Return the cover back.
6. Plug the washing machine into the network.

It can be annoying if your Ardo washing machine won’t turn on, but there are a few typical problems that might be the reason. The first step is to make sure the machine is plugged in and the outlet is operational by checking the power supply. As obvious as it may seem, the cause could be a tripped breaker or a loose plug.

Examine the door lock mechanism after that. The machine won’t start if the door isn’t shut all the way or if the lock is broken. This safety measure was put in place to guard against leaks while the washer is running. It’s important to make sure the lock works and the door closes correctly.

Finally, think about the wiring and control board. In the event that the machine is dead, there may be a more complicated electrical problem. In this situation, getting expert help might be essential to prevent additional harm or safety hazards.

You can frequently fix the issue and get your Ardo washing machine back in working order with little difficulty by methodically checking these potential issues.

There could be a number of reasons why your Ardo washing machine won’t turn on or the washing cycle won’t begin, ranging from a straightforward problem like a power supply interruption to more complicated problems like a broken door lock or control board. You can decide whether it’s a fix you can handle on your own or if you need to call in a professional by being aware of the potential causes and having the troubleshooting skills to address them.

Video on the topic

Ardo washing machine does not start! The lock does not close!

The washing machine turns on but does not start washing

Ardo does not turn on

The washing machine does not turn on – ARDO washing machine repair

The washing machine does not turn on, does not start and does not fill with water – DIY ARDO repair

The machine does not start? Who is to blame, the module or the lock?! Ardo washing machine repair.

How to reset the Ardo washing machine

The washing machine does not start washing