An Indesit washing machine’s pressure switch is essential for controlling the water level during each wash cycle. For the machine to operate effectively and prevent common problems like overfilling or underfilling, it must be properly adjusted.
If there’s something wrong with your Indesit washing machine, it could be a misaligned pressure switch. Thankfully, changing this part is a reasonably simple procedure that can spare you from future hassles and expensive repairs.
We’ll walk you through the process of adjusting the pressure switch in this post so you can get your washing machine back to working at its best. Whether you’re an experienced do-it-yourselfer or a novice to appliance maintenance, you’ll find this advice useful and simple to understand.
| Step | Description |
| Locate the pressure switch | The pressure switch is usually found inside the washing machine, near the control panel or at the top of the machine. It is a small, circular device connected to a thin tube. |
| Check the tube | Inspect the tube connected to the pressure switch for any blockages, kinks, or damage. Make sure it is securely connected at both ends. |
| Adjust the screw | Carefully turn the adjustment screw on the pressure switch to either increase or decrease the water level. Turn clockwise to increase and counterclockwise to decrease. |
| Test the machine | After adjusting, run a test cycle to check if the water level meets your preference. Repeat the adjustment if necessary. |
- Finding the part
- How to understand that the pressure switch is broken?
- What to check first?
- Adjusting the part
- Video on the topic
- Adjusting the pressure switch of the washing machine in my opinion
- Electronic pressure switch. Adjustment.
- Adjusting the pressure switch of the washing machine
- How to increase the water level in the washing machine. Four working methods. How to add water washer
- Adjustment (correct video in the description) of the water level in the drum of the washing machine, level sensor
- The device of the pressure switch of the washing machine
- Water level sensor in the washing machine, the machine takes in little water. pressure switch of the washing machine
- HOW TO CHECK THE PRESSURE STATION OF AN INDESIT WASHING MACHINE
Finding the part
The pressure switch is made up of a long rubber tube and a round plastic "washer." The first one is attached to the left side of the washing machine body, right under the top cover, and the second one is attached to both the tank nipple and the "washer" on opposite ends of the machine. As a result, the tank’s pressure is gauged and the water level that has been gathered is noted. You must take off the machine’s top cover in order to access the sensor. Follow these steps to accomplish this.
- Use a Phillips screwdriver to unscrew the two bolts holding the top cover from the back wall of the Indesit.
- Lifting the cover from the back, press on yourself until you hear 2-3 clicks from the latches working.
It is advised against pulling the cover too firmly because the plastic latches are prone to breaking.
- If the cover does not move from its place, you can increase the pressure and change the side for pressure on the panel.
As soon as the cover shifts, take it off and inspect the machine’s internal components. Typically, the body of the level sensor washer is either white, black, or blue in color. The tube that extends deep inside the machine and the pressure switch "give it away."
How to understand that the pressure switch is broken?
Make sure the level sensor is broken before attempting to fix and adjust it. If you look more closely at how the washing machine operates, you can see that this is not difficult. Something like an unusual humming sound when drinking water, a cycle that won’t start, or a constant drain should warn you.
Issues with the pressure switch will also be directly indicated by the display. 70% of the time, the level sensor is the one that is malfunctioning if the combination "F05" illuminates on the device. When the user discovers that there is either too little or too much water in the drum, the risk rises to 85%.
It is highly advised that a broken pressure switch not be ignored. Utilizing a device with a malfunctioning sensor can make the issue much worse. The heating element will burn out if there is not enough water in the tank, and the pump that cannot handle the volume will suffer if there is an overflow. If the control board’s triac fails, the situation gets worse because repairs will become three or four times more expensive.
What to check first?
After confirming that the pressure switch is malfunctioning, you must initiate the diagnostic process. The water intake system is inspected first, including the device’s "chamber," nozzle, and sleeve. The parts are in order if there are no chips, abrasions, or cracks. In the event that a washing powder deposit is found, the sensor is disassembled and every part is cleaned. Repairing a visible damage on the tube or "washer" won’t help; a complete replacement is necessary.
Evaluating the quality of the connection to the electrical network is the second step. It is quite possible that the terminal has become loose, the contact has come off, or the wire has become worn out or bent. Additionally, since dirt and deposits within the component may result in noticeable failures, it is imperative to inspect the sensor’s contact group. Lastly, testing of the pressure switch is required. This is how we behave.
- We find a tube that matches the diameter of the pressure switch nipple.
- Insert one end of the found tube into the sensor hose.
- Blow gently into the other end.
- Listen: if you hear 1-3 clicks, then the sensor is OK.
The sensor needs to be adjusted if the pressure switch is functional and clicks correctly but the machine does not wash. You almost never need to call repairmen to adjust a washing machine; most users can do it themselves. Below are some recommendations and instructions.
Adjusting the part
While not hard, adjusting the pressure switch takes time and patience. The most important thing is to proceed with extreme caution, move slowly, and follow the directions exactly. It is also crucial to make sure you are fully ready for the adjustment, which calls for a variety of tasks.
- Disconnect the machine from communications, the power grid and the water supply.
It is advised to note the location of the conductors on the camera before disconnecting the pressure switch’s wiring to avoid phase errors when reconnecting.
- Loosen the bolts and release the wiring connected to the sensor.
- Find the screws near the terminals, with the help of which the device contacts are attracted and loosened.
- Remove the sealant from the screws.
Our working screws are the ones that were previously mentioned. The primary goal is to seize the opportunity for contact opening and convergence. After that, the best possible operating parameters will be established, ensuring that the pressure switch operates at the appropriate time and precisely measures the water level in the tank. For these purposes, professional repairmen use a specialized tool; average users typically lack such a mechanism. You can, however, manage the well-known "trial and error method." We follow the following plan of action.
- Carefully turn the first screw half a turn in any direction.
- Return the pressure switch to its place and start the washing machine in the fastest mode.
- We evaluate the quality of the set. If there was little water before, and now there is more, then the progress is positive. In this case, we complete the cycle, remove the sensor, turn the screw again in the specified direction and fill it with sealant. When the manipulations gave the opposite result, for example, there is even less water, then we do the opposite. Unscrew the bolt 1-2 turns in the opposite direction and repeat the test.
Most of the time, a proper pressure switch adjustment salvages the day and the washing machine keeps running smoothly, both when filling and emptying. The key is to avoid "overtightening" the screws and to force yourself to restart the machine multiple times in order to get the best outcome.
To make sure your Indesit washing machine runs smoothly, you must adjust the pressure switch correctly. This little but essential part regulates the water level in the drum, which has a direct impact on your machine’s washing performance and safety.
The procedures described in this guide will help you keep your machine operating at peak performance and shield it from future problems. You can avoid future expensive repairs by checking and adjusting the pressure switch on a regular basis.
Always remember that in order to prevent any damage to your washing machine, it’s best to seek professional assistance if you’re unsure about performing these adjustments yourself.
An easy way to make sure the washing machine fills and drains properly and avoid problems like overfilling or not having enough water in a cycle is to adjust the pressure switch on an Indesit washing machine.
