An old washing machine motor can be put to new use with the construction of a vibrating table, if you’ve ever wondered how. These multipurpose instruments are excellent for many applications, such as compacting materials and mixing concrete, and building one at a reasonable cost can be achieved by utilizing a washing machine motor.
Vibration is used by a vibrating table to aid in the settling of materials. This is simple to accomplish with a washing machine motor by using its strong, steady vibrations. In addition to being a fantastic way to breathe new life into an outdated appliance, this project offers a practical solution for do-it-yourselfers who want to take on practical home projects.
We’ll guide you through the process of turning a washing machine motor into a working vibrating table in the following guide. You’ll find everything you need to begin this exciting project, from the tools and materials required to the assembly procedure.
Making a vibrating table out of the electric motor of an old washing machine is a clever do-it-yourself project that blends practicality and recycling. You can turn the motor into a useful tool for a variety of applications, such as material mixing or separation. In addition to being reasonably priced, this project is a terrific way to prolong the life of your washing machine’s motor and give it a new purpose in your home or workshop.
- What is needed to make a vibrating table?
- Description of the process of making a vibrating table
- Video on the topic
- Homemade vibration table
- DIY vibration table with a motor from a washing machine
- Paving slabs for a summer house "Or a vibration table for casting tiles from shit and sticks"
- Vibration table from an old washing machine
- Vibration table with a motor from a washing machine
What is needed to make a vibrating table?
The decision to make such a table from scratch was made in an effort to significantly reduce family spending on equipment purchases. Consequently, the least amount of tools necessary for manufacturing are typically those that won’t break the bank. There aren’t many consumables on the list.
- Construction corner.
- Profile pipe.
- Motor from a washing machine.
- Sheet metal.
- Springs.
- Bolts and nuts.
The list of necessary equipment is already more substantial: an electric welder with appropriate electrodes, a screwdriver, pliers, a hammer, and a drill with metal drill bits are all needed, along with a grinder and wheels. The only specialized tool required is a magnetic welding square, which is widely available at specialty stores.
Description of the process of making a vibrating table
Make sure you meet all the safety requirements for using a power tool before beginning to build a vibrating table. You should also wear personal protective equipment. You can now begin manufacturing the apparatus.
- Cut off 4 equal pieces of profile pipe to weld the frame.
- We weld the frame, and weld the fifth piece of the profile inside. At this stage of the work, a magnetic square is needed to monitor the 90 degree angle.
- We weld a piece of steel pipe to the fifth profile, which is necessary to secure the washing machine motor.
- We cut off the pipe blanks, and then proceed to creating the frame of the vibrating table.
You can save money by using the base of a household sawmill, which is stronger and can withstand vibration. This is also convenient because the sawmill can be assembled and disassembled at any time, making it easy to assemble the vibrating table.
- At the bottom of the frame, we drill holes and weld nuts into which you need to screw the support legs, for which we use long strong bolts. For additional stability, you can make 4 small metal plates and weld them to the bolt heads.
- At this stage, you need to cut off 4 pieces of corner and weld the upper frame from them. Cut off 4 plates, weld springs to them, then attach them to our frame made of corners.
- Now the frame needs to be installed on top of the table, and the springs attached to the frame.
- We place the washing machine motor in the prepared place.
- At the top of the frame we attach a profile with a pulley, and then tighten the belt to connect the pulley of the electric motor to the upper pulley.
- Cut off the metal mesh and weld it to the frame from the corner.
- Now you will need a piece of thin sheet metal, from which we make a protective casing for the washing machine motor.
- Finally, we clean all the seams with a grinder, paint the vibration table, and then attach the unit with the control toggle switch to our frame.
Thus, with just a few basic tools, a vibration table was made in 12 steps using an electric motor from an old washing machine. All that’s left to do is comprehend the device’s operating principle.
| Feature | Description |
| Purpose | Used to create a vibrating surface for mixing or separating materials. |
| Motor Type | Typically uses a washing machine"s electric motor. |
| Motor Speed | Speed can be adjusted to control vibration intensity. |
| Power Source | Runs on standard electrical power, often 110V or 220V. |
| Construction | Usually involves mounting the motor on a sturdy frame with a vibration platform. |
| Benefits | Cost-effective way to repurpose old washing machine parts. |
Repurposing an old washing machine motor into a vibrating table is a clever and useful way to reuse outdated equipment. You can create a flexible tool for a variety of applications, from mixing materials to improving craft projects, by harnessing the vibrations of the motor.
A few essential steps in building your vibrating table are mounting the motor, attaching it to a stable surface, and making sure the vibration strength and balance are correct. A little do-it-yourself work can turn an apparently broken component into a working, useful gadget.
This project not only recycles old components to help reduce waste, but it also provides an interactive way to learn about the mechanics underlying motion and vibration. A vibrating table can be a satisfying project if you enjoy tinkering or are into home improvement.
