The Haier washing machine does not spin

It can be annoying and inconvenient if your Haier washing machine isn’t spinning. You anticipate that your clothes will be clean and almost dry when the spin cycle fails, leaving you with sopping wet clothes.

There are a few possible causes for your machine’s improper spinning behavior. Comprehending the potential reasons of various problems, ranging from basic ones like an uneven load to intricate mechanical issues, can aid in troubleshooting and restore your machine’s functionality.

This post will discuss typical causes of a Haier washing machine not spinning and provide workable fixes to get it operating again.

List of possible problems

It is not acceptable for you to ignore the automatic laundry machine’s refusal to spin. Naturally, you could "twist" the items by hand after washing, but this isn’t the ideal solution. You must first invest your time and effort. Second, the washing machine might get even "worse" if you don’t fix it.

The following are the main causes of the Haier washing machine not spinning:

• the user has disabled the spin option (perhaps a program has been selected that does not provide this function);
• the machine"s intelligence detected an imbalance in the drum and cancelled the spin cycle for safety reasons;
• the drainage system is not working properly (water is not discharged into the sewer, so the spin cycle does not start);
• the Hall sensor is out of order;
• the washing machine"s electric motor is broken;
• problems with the bearing unit have been recorded;
• a foreign object has gotten into the drum, which prevents the container from rotating freely;
• the electronic control module is "failing".

If there are issues with the spin cycle, it is not permitted to run the washing machine as this can lead to numerous problems.

The majority of the aforementioned issues are self-fixable and don’t require technical assistance. Only if the washing machine is brand-new and still covered by warranty, or if there are issues with the control module, will you need to get in touch with the service center. We will work out in detail how to deal with a non-spinning machine.

The wrong program is working

The safest explanation is to launch a non-spinning program. washing machine that operates automatically When the “Wool”, “Silk”, and “Down” algorithms are activated, along with the delicate and hand wash modes, Haier will not spin the drum at its fastest speed. Check the position to which the selector was moved as a result.

You can change the spin speed of any Haier washing machine from zero to maximum speed. It’s possible that you used the button to disable the function, leaving the clothes wet and the machine unable to spin them.

Turn on the machine, choose any quick program that includes spinning, and begin the cycle to rule out a user error. Watch the device as it operates. A thorough diagnosis of the washing machine will be necessary if the issue with it refusing to spin things again occurs.

It can be annoying if your Haier washing machine won’t spin, but you can usually solve the problem by following a few easy troubleshooting steps, like resetting the machine, inspecting the drive belt, or checking the load balance.

An imbalance has occurred inside the drum

In the event that a system imbalance is detected, the automatic washing machine will not begin spinning. Things "clumping" together and not adhering to the washing machine’s allowable load weight guidelines can cause an imbalance in the drum. After identifying such a malfunction, the control module turns off the washing machine.

Haier washing machines that were released more than five years ago are more likely to have this issue. Special sensors built into modern machines keep an eye on the environment and guard against imbalance. And they show the associated error code if a malfunction is found.

Haier automatic machines exhibit imbalance in the following ways:

• After finishing rinsing the items, the washing machine spins the drum;
• Each attempt to achieve the desired speed is accompanied by a loud hum and knocking;
• The device begins to vibrate and “jump”;
• The spin cycle is canceled;
• The washing machine drains the water;
• The cycle ends 10-15 minutes earlier;
• The laundry in the drum remains wet.

Dealing with the imbalance is simple. Simply open the hatch, remove some of the items, and restart the cycle if the problem resulted from overloading the machine. Conversely, "throw" more clothes in the washing machine when there isn’t enough laundry.

A common cause of imbalance is objects clumping together inside the drum. In this case, you must open the hatch and distribute the clothing evenly throughout the machine. You can then resume the wash after this.

In addition to stopping the spin, imbalance puts the washing machine in danger.

The machine will have time to "struggle" for a while while the intelligence logs the imbalance and stops the cycle. For the washing machine, "jumps" and drum impacts against the tank walls are not recommended. Shock absorbers, bearings, and the shaft are all harmed in this scenario. Consequently, it’s critical to take action to avoid imbalance, especially in order to adhere to loading guidelines and prevent clumping.

Here’s a succinct summary of the piece:

The most common causes of a non-spinning Haier washing machine are unbalanced loads, clogged drain pumps, and malfunctioning motors. Fixing these issues on your own can frequently get back to normal operation.

It might be necessary to contact a professional, though, if the problem still exists after troubleshooting. Frequent maintenance can help keep your machine operating smoothly by preventing such issues.

Keep in mind that, over time, you can save time and money by being aware of how your washing machine works and identifying the early warning signs of problems.

Video on the topic

Does not spin how the Haier washing machine works spin HW60-10636A P–2