Instructions for installing a ceiling liana dryer

When space is at a premium, a ceiling liana dryer is a useful indoor drying solution for clothing. Because this kind of dryer is suspended from the ceiling, it takes up less floor space and makes drying clothes, even in small apartments, easier.

Although installing a ceiling liana dryer may seem difficult, it is possible to complete the job successfully with the correct assistance. You can safely and effectively set up your dryer with the help of this article, making it ready for frequent use.

You can have a dependable drying solution that fits in perfectly with your house by following these easy steps, which will make laundry day less stressful and more convenient.

Step	Description
1	Mark the ceiling where you want to install the dryer.
2	Drill holes at the marked points.
3	Insert the provided wall plugs into the holes.
4	Screw the mounting brackets securely to the ceiling.
5	Attach the dryer rods to the brackets.
6	Thread the ropes through the pulleys on the brackets.
7	Secure the ropes to the wall cleats at a comfortable height.
8	Test the dryer by lifting and lowering the rods.

How a liana dryer works and what is good about it

The primary drawback of traditional drying devices that are stationary is that their crossbars or ropes occupy a significant amount of space on balconies and loggias, which can be inconvenient for the owners. In the past, this issue was fixed by tying ropes to long consoles that reached past the balconies.

Some apartment dwellers continue to use this method to dry their clothes and linens out of necessity.

Clothes dried using this technique are not shielded from dust and debris that may fly from higher floors. External structures are completely useless in cold or rainy weather because the laundry cannot dry.

All of the aforementioned drawbacks do not apply to a liana dryer. The whole thing is hidden under the ceiling. There are options for sizes for both a small balcony and a large loggia.

An installation of a liana-style dryer on a balcony ceiling

Clothes can be lowered utilizing ropes fastened to the wall to be placed on metal tubes (henceforth also called rods) or small-diameter plastic pipes with thick walls. Every rod is raised up once the laundry is hung up. It is preferable to arrange the tubes at varying heights because there will be more intense air exchange during the drying process.

Greetings, readers! Join our Telegram channel to receive helpful housekeeping and other information: Visit the channel.

Utilizing rods at various heights for drying

One can attribute the following benefits of this dryer:

1. There are no sharp creases on dried items, which are usually formed from thin cords or ropes and are difficult to smooth out.
2. It is easy to care for the design, just wipe the tubes and other details. Regular care ensures that clothes are free of dirt and dust after drying.
3. The design is so compact that the raised rods are practically invisible if there is no laundry on them.
4. Each tube can hold at least 2–2.5 kg of clothes. By multiplying these numbers by the number of tubes (from 3 to 6, depending on the model), you can easily determine the maximum amount of clothes that can be dried at the same time.

The design is essentially undetectable when folded.

When purchasing, the dryer’s materials of construction and manufacturer should receive particular consideration. If the design has a lot of plastic components, hanging a lot of laundry on the rods could cause it to break quickly. This is particularly relevant to tubes; it is preferable to purchase a device with metal rods.

In the design, metal rods are more dependable than plastic ones.

You can use stainless steel tubes. They are resilient to corrosion and long-lasting. Certain manufacturers also use highly dependable aluminum rods that have been coated to prevent corrosion.

Sometimes the weight of the tubes with clothes is too much for the plastic strip that holds the cords in place.

It is preferable if the rollers that are used to pull the adjustment ropes are secured in metal supports. It’s important to consider the adjustment rope’s dependability and quality as well as the strip’s design when fixing the cords.

Rotating rollers positioned within a metal mount on a metal rod

Modifications of liana dryers

There are liana dryers for the wall in addition to ceiling-mounted models available for purchase. These patterns are adhered to walls. Wall mounts are frequently more dependable than ceiling mounts. The ceiling’s finishing materials have a significant impact as well.

For instance, if you install a clothes dryer in the ceiling and fasten it to the lining, the latter will probably be unable to support the weight of the structure when filled with linen. As a result, it is advised to fasten the dryer’s metal support to the ceiling prior to finishing. Furthermore, drilling holes in a ceiling composed of reinforced concrete is a difficult task.

Something affixed to the wall

Wall-mounted versions of the drying structure are simpler to erect because it is much simpler to drill holes in brick for dowels. The load a clothes-filled dryer creates is directed perpendicular to the wall surface, lowering the likelihood that the dryer will break.

Place bulky objects on the wall structure’s tubes that are closest to the wall.

One easy rule to remember when using wall-mounted devices is to hang heavy items on rods that are closer to the wall. Hang the lightest clothes on the distant tubes. As a result, the support that is fastened to the wall will bear less weight.

Vine dryer kit

The following components are part of the kit:

• two ceiling or wall metal mounts with rollers;
• plastic or metal tubes, the number of which depends on the model;
• stop bar for ropes;
• short and long ropes – according to the number of rods;
• stop caps.

Stop bar and caps fastened to the ropes

Depending on the model, the rods’ lengths can range from 0.5 to 2.5 meters. You can select a drying device for any room in the apartment thanks to the wide selection. However, if a set has excessively long tubes, don’t purchase it. The weight of damp laundry can cause even 2.5-meter-long metal rods to bend. Two meters is the ideal tube size for loggias and balconies. The rods must be at least 1.2 meters above the ground in order to be permitted.

Try to avoid purchasing a dryer made in China when making your selection. It’s going to be an error. Sadly, Chinese electronics are not trustworthy enough. Russian or nearby country dryers are more dependable. Aluminum is regarded as the best material because it is strong and lightweight.

The ease of installation of a ceiling liana dryer can significantly improve the effectiveness of drying laundry at home. From picking the ideal spot to safely mounting the dryer and making sure it’s oriented correctly for convenience of use, this guide takes you through all the important processes. Your ceiling dryer can be up and running quickly with a few simple tools and do-it-yourself knowledge, offering a practical and room-saving solution for drying clothes.

Some successful models

Good Liana-type drying device models with comparable features and a price significantly less than their European counterparts are made in Belarus and Russia. For instance, the Russian-made Dogrular model SP1500 dryer, which is sold in Turkey, weighs just slightly over 2 kg. Five tubes can support clothing weighing a combined minimum of 10 kg at the same time. Plastic is used in the design, but aluminum is used for strong rods and fasteners. The device has a width of 1.5 meters and a total length of 12 meters for the drying surface.

Dehydrator Dogrular SP1505

Rods 1.5 and 2.5 meters long are used in the production of Belarusian dryer Comfort Aluminum. Clothes weighing a combined 10 kg can be dried on 5 tubes with either modification. Materials: plastic and aluminum.

A Belarusian invention for comfort aluminum drying

The retail network offers drying products made in Europe in addition to goods from the CIS. The dryers are much more expensive, but they have excellent features. For instance, the Italian-designed Gimi Lift brand, which features coated steel rods, has the capacity to dry up to 12 kg of objects at once. Simultaneously, the maximum weight is independent of the rod length, which ranges from 1.2 to 2.4 meters.

Rods and wall mounting for the Gimi Lift drying apparatus

While having identical features, French products under the Luminarc Liana brand are not more expensive than Italian ones. Similar to most other parts, dryer tubes are composed of steel and are capable of supporting up to 12 kg of weight. There are five rods. This brand’s 1.4 m tube length dryers are available in the retail network.

Assembly instructions

The following equipment must be ready before hanging a clothes dryer from the ceiling:

• a hammer drill with a drill bit, 6 mm in diameter;
• a screwdriver;
• a tape measure and a marker;
• dowels with a diameter of 5 mm and screws with a diameter of 4 mm.

A collection of instruments for erecting the drying framework

Unpack the package containing the drying structure’s components first. One by one, remove each component and compare its availability to the comprehensiveness of the instructions. Examine the installation manual with great care.

The liana dryer dismantled

Without the assistance of experts, installing the liana dryer is a simple task that you can complete on your own. The table provides comprehensive instructions accompanied by images:

After using a tape measure to measure and mark the space between each fastener so that it equals the length of the tubes, attach the fasteners to the ceiling. Place a marker where the holes that must be drilled to install the fasteners are.

Using a hammer drill, drill holes in the ceiling and place dowels into them.

Screws are used to fasten the roller-equipped mounts to the holes.

Select a location for the stop bar that will allow for easy access. Use dowels and screws to secure the bar at a height of 1.5 to 1.6 meters off the ground.

If the ends of the rod are not already tucked in, pass the short and long cords through and fasten them. The roller in the mount nearest the stop bar is where you want to pull the short cord through. Insert the lengthy cord through both mounts’ rollers.

To make it easy to raise and lower the tube, place the caps on the cords and tighten them. Install each rod in the kit one at a time.

It’s evident that installing the dryer is simple. Lastly, make sure every rod is operating properly and clean them of any dirt or dust. You can now begin letting your laundry air dry.

If you want to make the most of your laundry space, installing a ceiling liana dryer is a sensible solution. You can quickly set up the dryer and take advantage of a convenient way to dry your clothes by carefully following the instructions.

To ensure that you get the most out of your dryer, don’t forget to measure your ceiling height precisely and pick the best location for installation. Make sure everything is firmly fastened and operating as intended by taking your time with each step.

After installation, you’ll have a stable, room-saving drying solution that blends in perfectly with your house. Experience the efficiency and convenience of a ceiling liana dryer in your laundry routine.

Video on the topic

Clothes dryer. Installation on the ceiling in detail

Installation of a clothes dryer on the ceiling

Liana ceiling dryer. Installation on balcony. 0974288408

Installation and assembly of the ceiling dryer-Liana.

GOT TRAPPED IN THE ROPES. INSTALLING A CEILING CLOTHES DRYER WITH YOUR OWN HANDS.

Instructions for assembling and installing the Liana dryer