Have you ever struggled with a Braun iron that simply won’t heat up or appears to be broken? You’re not by yourself! These useful appliances occasionally require some TLC to get back in working order. Disassembling your Braun iron could be the answer if you’re feeling daring and prepared to take on a DIY fix.
This helpful guide will take you step-by-step through the process of disassembling your Braun iron, providing advice and pointers along the way. We’ll make sure you have an easy way to identify the issue and its solution, from taking off the external casing to getting to the internal parts.
So gather your tools and let’s get started disassembling your Braun iron if you’re up for the challenge and want to give it a new lease of life. Before you know it, you’ll be pressing shirts again!
| Step | Description |
| 1 | Unplug the iron and let it cool down completely. |
| 2 | Remove any water from the tank and detach any detachable parts. |
| 3 | Unscrew the screws on the bottom plate of the iron using a screwdriver. |
| 4 | Carefully lift off the bottom plate to access the internal components. |
| 5 | Disconnect any wires or clips attached to the internal parts. |
| 6 | Remove the internal components such as the heating element or thermostat if needed. |
| 7 | To reassemble, reverse the steps and ensure all parts are securely fastened. |
- The process of disassembling a Braun FreeStyle iron
- Procedure – table
- How to get rid of scale
- Solving the problem with auto-off
- The process of disassembling the Braun TexStyle iron
- Procedure – table
- What to do if the electric heater in a Braun iron burns out
- Video on the topic
- Repair. Braun TexStyle 7. disassembling the iron.
- How to disassemble the Braun Texstyle 3 TS 355A iron
- DISASSEMBLY Braun Texstyle 3
The process of disassembling a Braun FreeStyle iron
One characteristic of German irons is the star-shaped heads on the fastening bolts. You can create a tool out of a regular flat-head screwdriver to unscrew them. The working blade must be chosen so that its size fits into the bolt head’s hole, and it must then be filed as indicated in the figure below.
A file should be used to slightly file the screwdriver’s tip.
Procedure – table
The order listed in the table is the optimal one to work in, though there might be a few minor variations:
The bolts holding the back cover in place can be undone with a screwdriver fitted with a modified tip. Take off the cover.
Remove the case’s upper decorative plug with a flat screwdriver. The fastening latches must be bent back in order to accomplish this.
Using a screwdriver, pry up and remove the filler cap and sprayer from the front portion of the case. The components are simple to remove.
To release the fastening screw in the sprayer’s niche, use a screwdriver.
To release the power cord’s ball lock, bend back the latches with a screwdriver.
The temperature controller can be carefully removed by prying it up with a screwdriver. When you flip the iron over, the ratchet spring and conical lock will drop out of the opening near the thermostat. Keep them close at hand.
With the heating element connector removed, remove the electronic control unit. Its appearance and the quantity of features it offers may vary depending on the modification.
Next, detach the body’s upper portion from the sole. The iron’s base with its plastic cover will stay on the table.
Turn the clamps in the locations shown in the picture using pliers. They must be rotated ninety degrees clockwise until they line up with the body’s grooves.
Take off the plastic cover to reveal the sole. At this point, the scale that houses the heating element in the metal base can be removed (hereinafter referred to as the heating element)
We provide readers with a video clip that demonstrates the Braun FreeStyle device’s disassembly and assembly:
How to get rid of scale
You can use a concentrated vinegar or citric acid solution to remove limescale on your own. Use water that has been heated to between +50 and 60 °C to prepare it. 10 g of acid to 100 ml or 1 tsp. vinegar to 1 l of water are the proportions. Make sure the solution is inside the soleplate by immersing it. The scale will eventually come loose and be simple to remove. Use running water to give the area a thorough rinse after removing the limescale. The Braun iron is assembled in the opposite order.
Solving the problem with auto-off
The device can no longer function properly if the automatic shutdown feature is no longer functional. The device starts having trouble turning on and turns off on its own while ironing. It is evident that the control unit’s horizontal position sensor is no longer functional.
A brown and white wire is visible in the picture on the left side of the control unit.
If you do not need the auto-off function, you can handle the issue on your own. Simply connect the brown and white wires that go to the control unit to accomplish this. Heat-shrink tape is used to insulate the connection point. Following this, the gadget will still function, but neither the auto-off feature nor the power-on indicator will function.
Although taking apart a Braun iron may seem difficult, it’s actually a simple process that can help you avoid spending time and money on repairs. We’ll walk you through the process of carefully disassembling your Braun iron in this useful guide, from handling sensitive internal parts to securely removing the outside screws. You’ll be able to take care of common problems, properly clean and maintain your iron, and restore it to like-new condition by following these simple instructions.
The process of disassembling the Braun TexStyle iron
This series of electric irons is also simple to dismantle. They share many structural similarities with the products in the FreeStyle series.
Greetings, readers! Join our Telegram channel to receive helpful housekeeping and other information: Visit the channel.
Braun manufactured the TexStyle model, modification 7.
Procedure – table
The order in which the iron is disassembled is shown in the table:
Under the rubber plug are the back cover’s fastening screws. Their heads are likewise shaped like stars. Therefore, you should create a screwdriver with the same shape as the one above in order to unscrew them (for repairing FreeStyle series devices)
Once the screws are removed and the back cover is lifted, the control unit with a cord attached will be visible.
Pull the control unit over while giving it a slight shake from side to side to remove it. Use a screwdriver to help if it is immobile by putting it between the body and the control unit from the bottom.
View of the control unit through the connector. The sole’s contact plates are among the holes that are visible in the foreground. The plates are connected to the sole’s built-in heater.
Additional disassembly follows the same procedure as the Braun Frestyle’s previously mentioned order. That is, you will need to take off the sprayer, temperature control, and pouring opening lid. You will also need to unscrew another fastener screw located in the case bow and use pliers to turn the plastic lid fixers on the sole. The iron’s photogenic base will entirely separate at the conclusion of the match.
The iron braun texstyle must be gathered in the opposite order. Since connecting the conductors will be impossible in the event of a control unit breakdown, including issues with automatic shutdown, the unit will need to be replaced entirely. It is preferable to take the iron to a service center for repair because they are filled with compound.
Compound-filled network cables for increased dependability
Using the above-described method, you can remove scale from the housing and metal base.
What to do if the electric heater in a Braun iron burns out
Regretfully, the heating element in Braun ironing devices from the aforementioned series can only be replaced along with the sole. You will need to purchase a new base for the electric iron if it burns out. Considering that it costs about the same as the iron, it makes sense to consider getting a new household appliance.
By measuring the resistance between the two outer plates that emerge from the base, you can use a multimeter to verify the integrity of the heating element. The heater’s total resistance ranges from 50 to 60 ohms. There is a break in the circuit if the measuring device displays an extremely high value or if its display begins to flash.
Finally, I would like to point out that the plastic clamps found in the housings of ironing devices manufactured in Germany are not very strong. As a result, take care disassembling.
Although dismantling a Braun iron may appear difficult, it is actually fairly manageable given enough time and the appropriate methods. You can safely open up your iron, examine its parts, and take care of any problems you may be having by following the instructions provided in this guide. Understanding how to disassemble your iron is a useful ability that can prolong its life and enhance its performance, whether you’re trying to clear out accumulated lint or replace a worn-out component.
Never forget to unplug the iron before using it and let it cool fully before starting. The first priority should always be safety. The procedure can go more smoothly and prevent any unintentional damage by using the right tools and operating in a well-lit area. It’s also a good idea to keep an inventory of the screws and parts you remove, maybe in a little container.
After the iron has been disassembled, take your time and carefully examine every part. Keep an eye out for any wear or damage that might be compromising its effectiveness. Eliminating any dust or debris can also have a big impact. To prevent more problems, make sure the replacement parts are compatible with your model.
It’s crucial to reassemble your Braun iron precisely as it is to disassemble it. Verify that all the parts are replaced in their original positions and that the screws are securely fastened. You will be glad you took the time to learn how to disassemble it because a well-maintained iron lasts longer and works better.
You can now confidently handle the upkeep of your Braun iron by keeping these suggestions in mind. Maintaining your iron can prevent expensive repairs and guarantee that it keeps working properly. Happy fixing!
