You’re not the only one if your Indesit washing machine rattles while it’s spinning. This is a frequent problem with several potential causes. In addition to being unsettling, the noise may be a sign of a problem that needs to be addressed.
Occasionally, the cause can be as straightforward as an uneven load or loose objects inside the drum. But there might also be problems with internal parts of the machine, like the motor, shock absorbers, or bearings.
This post will examine potential causes of the rattling noise and provide solutions to assist in resolving the issue. Here are some helpful hints to get your washing machine operating smoothly once more, whether it’s a simple DIY fix or something that requires professional repair.
Or maybe there is no reason to worry?
Inquisitive residents frequently visit service centers, where they tell the managers how horribly noisy their washing machines are. They claim that since the machines aren’t supposed to operate that loudly, there is most likely a breakdown. When the technician gets there, he or she checks that the washing machine is operating correctly, that there are no malfunctions, and that the noise level is within reasonable bounds. After collecting payment for the call, the technician departs.
In this situation, it’s important to realize that everyone has a different threshold for noise sensitivity; some people cannot stand noises louder than 70 dB, while others can handle noises up to 130 dB. Make sure that your Indesit washing machine model is truly operating louder than usual before rushing to the service center. In this day and age, this is not hard to accomplish. Take these actions:
- take the instructions that came with your Indesit washing machine;
- find in the instructions the noise level in dB that the washing machine should make during spinning;
The maximum noise level that the washing machine can produce must be disclosed by the manufacturer; however, if you do not have the instructions, you can check the model’s noise level online.
- download and install any free noise meter utility for your smartphone (for example, we used the Sound Meter utility);
- configure the utility according to the instructions that come with it, and measure the noise from the Indesit washing machine during spinning.
Next, take action based on the measurement’s findings. If the utility’s reported dB value (+–5-7 dB) roughly matches the instruction-specified indicator, then the noise is typical for this model and there is nothing you can do to stop it short of replacing the washing machine. You should investigate the reason if there is a significant discrepancy between the indicators and the noise level is higher than the stated level by 15, 20, or even 40 dB. This is clearly abnormal.
Do not rush to call a technician or climb inside the washing machine, even if the noise level during spinning is significantly higher than what the manufacturer stated. Observe the machine’s behavior when the drum’s rotational speed reaches its maximum and, naturally, pay close attention to the amount and technique of linen you insert into the drum. It’s possible that a common user mistake or a bad installation is what’s causing the issues rather than the machine itself. I’d like to go into a little more detail about installation.
Installation defects
The installation of the washing machine requires careful attention to detail if it is to function properly and not generate extra noise. Many users disregard the installation guidelines because they believe it is improper to take the time to read them. Our technicians consequently shake their heads when they visit clients’ apartments and discover washing machines installed at an angle of 10 degrees, or worse, that the owners of the machines have forgotten to remove the transport bolts and are continuing to use the machines as if nothing had happened.
Recall! Breaking the installation guidelines for an Indesit washing machine results in the manufacturer’s warranty obligations for repairs being canceled. Furthermore, we are certain that the machine will require repairs shortly after such an installation.
Make sure there is a sturdy base underneath any Indesit automatic washing machine before placing it anywhere. Concrete floors are the best option, but if a concrete pedestal cannot be created, at least reinforce the wooden floor to ensure that it will not buckle or wobble even when you start jumping on it. The floor can easily support a washing machine in operation if it can support an adult man jumping on it.
Once the floor has been strengthened, you can begin installing it; however, do not remove the building level. The operation of the Indesit or any other washing machine will be impacted if there is even the smallest installation error. Remember to take out the transport bolts as well, which are fastened into unique openings on the washing machine’s rear wall.
Even though the washing machine is set up on an aged wooden floor, as long as it is properly strengthened beforehand, nothing will go wrong.
Remember that there should be a space of 1 cm between the furniture’s walls and the washing machine’s body and 2 cm between the side walls if you are installing the appliance in a sink, under a countertop, or inside other furniture. To ensure that the vibration is not transferred to the furniture and has no negative effects, it is ideal for the washing machine to have no contact with it at all.
These are merely suggestions for a proper washing machine installation; for more information, see the publication Installation and connection of the washing machine. This article contains a wealth of helpful information.
Foreign object or factory defect
If the Indesit washing machine is noisy as soon as you buy it, you should pay close attention to the type of sound it makes. Half the problem is solved if the noise level is measured and only slightly higher than what the manufacturer stated. Even in this scenario, though, you still have the option to request a warranty repair or have the equipment replaced with one that is comparable. But you need to stop the wash right away, drain the water, and get a technician to your house right away if the noise is uneven and you hear a metallic clank over the hum and rumble. In such conditions, washing is not possible.
It is not advisable to attempt to disassemble a brand-new Indesit washing machine while it is still under warranty. Permit the technician at the service center to investigate the cause of the noise while spinning. We are most likely discussing a manufacturing defect; perhaps some moving parts on your machine, like bearings, aren’t working properly. Whatever the case, it will be resolved by an expert who is required to do this.
It might come to light that your previous Indesit washing machine was operating normally when it started to clank and create a lot of noise while spinning. In this instance, it’s possible that a sizable foreign object just fell into the tank and isn’t the cause of the problem. Without being a skilled craftsman, it is not always possible to tell this by sound, but there are some telltale indicators. Let’s highlight them.
- Along with the noise and clanking, you can distinguish the characteristic jamming of the drum during the spin cycle.
- A foreign object will dangle in the tank while the machine is running at high speeds, if you listen closely, you can distinguish it.
- You can shine a flashlight into the small holes in the drum and try to see what is at the bottom of the tank. You can also move the edge of the cuff and look with a flashlight into the gap between the tank and the drum.
Although it is extremely difficult, you can try and occasionally succeed in seeing something through the perforations in the drum’s walls.
Imagine for a moment that you heard, saw, or just remembered something foreign that might have vanished into the washer’s tank. In this situation, what should I do?
- Remove the back wall of the "home assistant".
- Remove the drive belt.
- We take a photo on a smartphone of the location of the wires on the heating element, which is located at the bottom of the tank.
- We remove the wires, unscrew the nut located between the contacts of the heating element, pull out the heating element.
- We climb with our hand into the hole that formed after removing the heating element, and scoop out all the dirt from the bottom of the tank along with the foreign object.
- We put the heating element and other parts in place, assemble and install the washing machine.
The reason behind the rattle when spinning of your Indesit washing machine could be worn-out bearings, loose parts, or imbalanced loads. By taking care of these issues early on, you can keep your machine operating smoothly and avoid more significant damage, which can save you money on repairs.
| Possible Cause | Solution |
| Loose items in drum | Check and remove any loose objects like coins or buttons |
| Washing machine not level | Adjust the feet to ensure the machine is on a stable surface |
| Worn drum bearings | Contact a technician to inspect and replace the bearings |
| Unbalanced load | Redistribute laundry evenly in the drum |
| Faulty shock absorbers | Get a professional to replace worn shock absorbers |
It’s important to pay attention to the noise coming from your Indesit washing machine if it rattles while in the spin cycle. The rattling may seem like a small annoyance, but it could be a sign of a more serious issue down the road.
Unbalanced loads, loose parts, or foreign objects stuck inside are common causes of rattling. You can keep additional damage from occurring and increase the lifespan of your washing machine by taking care of these problems early.
You can keep your machine operating smoothly by performing routine maintenance, such as cleaning the drum and looking for loose parts. After trying various fixes, if the noise doesn’t go away, you should think about hiring an expert to do a thorough inspection and repair.
