If you recently bought a Leran dishwasher, you may be excited to use it right away but don’t know where to begin. Dishwashers may seem intimidating at first, but it’s actually very simple to turn on the Leran model and start a wash cycle.
You’ll feel more confident and be able to wash your dishes flawlessly every time if you know the basic procedures. These simple instructions will help you through the process whether you’re using a dishwasher for the first time or moving to the Leran brand.
You can load your dishwasher, choose your settings, and start the wash cycle in a matter of minutes. Let’s examine the steps you must take to ensure the optimal operation of your Leran dishwasher.
| Step | Description |
| 1 | Load the dishes |
| 2 | Add detergent to the dispenser |
| 3 | Close the dishwasher door |
| 4 | Press the power button to turn on the machine |
| 5 | Select the desired wash cycle |
| 6 | Press the start button to begin the wash |
Adding the necessary products
Make sure you read the dishwasher’s instructions after making a purchase. All operating instructions for the equipment are contained in the user manual. From instructions on how to link the device to utilities and initiate the wash, to a rundown of every program and maintenance advice.
When a new dishwasher is first turned on, it should be idle and not have any dishes inside the working chamber. This cycle is required to clean the machine’s interior and watch how it works. However, you must load specific products into the dishwasher before turning on the test switch.
The dishwasher requires specific salt, detergent, and rinse aid for proper operation.
Prior to turning on the Leran dishwasher for the first time, you have to:
- set up the softener;
- fill the dishwasher salt into the softener, pour 500 ml of water into it;
- pour rinse aid into the dispenser;
- add dishwashing detergent to the tray.
You must be aware of the local water hardness level in order to modify the dishwasher’s softener. Utilizing specialized test strips, you can measure it. Making a call to the Water Utility to explain the indicator is the second option. The amount of salt consumed is changed as a result.
Adjust the softener after determining the tap water’s hardness. The Leran dishwasher instructions specify where the regulator should be adjusted. After that, you can fill a designated container with salt. The following will be the algorithm:
- pull the lower basket out of the washing chamber;
- find the lid on the bottom of the hopper, unscrew it;
- pour about 1.5 kg of salt into the container;
- pour 500 ml of water into the compartment;
- tightly screw the cap counterclockwise.
The test cycle needs to begin as soon as the salt has been added to the container. If not, the dishwasher’s internal components may sustain damage from salt water. However, you must fill the dispenser with detergent before turning on the program.
The dishwasher’s door contains the detergent dispenser. It has two compartments: one for the soaking cycle, which holds approximately 5 grams, and the other for the primary wash, which holds 20 grams of material. Once the compartments are filled, firmly shut the container’s lid.
The only detergents that are permitted are those made especially for dishwashers.
It will be sufficient to add detergent and salt for the test cycle. Rinse aid must also be added to the machine for later use. It helps cutlery dry faster and keeps streaks off dishes.
Next to the detergent dispenser in the dishwasher door is where you’ll find the rinse aid reservoir. The tray holds 110 milliliters. Once the container is full, turn the lid to the right to shut it.
Refresh aid dispenser needs to be adjusted. Here, the hardness of your tap water is another important consideration. Set the handle to position 1 first. Move the selector to position 2 if there are still drops on the dishes, and so on, until the desired result is obtained.
Make sure the dishwasher is correctly loaded with dishes and detergent before turning on the Leran dishwasher and beginning a wash cycle. Next, use the control panel to choose your preferred wash cycle, shut the door firmly, and hit the start button. The dishwasher will start the washing cycle, and in no time at all, your dishes will be spotless.
Loading kitchen utensils
Loading the dishes is the second thing that must be done before beginning the wash. Here, there are a few subtleties as well. It’s critical to properly arrange the cutlery so that each piece is uniformly cleaned by the water.
The following items cannot be washed in a dishwasher:
- products with wooden, porcelain and mother-of-pearl handles;
- non-heat-resistant plastic dishes;
- pewter and copper cutlery;
- thin crystal;
- wooden dishes;
- synthetic fiber products.
Make sure to remove any large food remnants from the dishes before putting them into the machine. Empty the mugs of tea bags and clean the plates of burnt food and fruit pits. Avoid packing the dishwasher with too many tiny items because they could fall out of the basket while it’s running.
The following suggestions for packing dishes into the working chamber are given in the Leran dishwasher’s instructions:
- deep dishes (pots, saucepans, mugs) should be placed upside down;
- items with curves and indentations should be placed at an angle so that water can freely drain from the recesses;
- all cutlery should be securely fixed in the baskets so that they do not fall during the wash;
- dishes should not interfere with the rotation of the dishwasher spray arms;
- do not stack items inside each other;
- it is necessary to leave a gap between the items so that each item is washed from all sides;
- large items should be loaded into the lower basket, smaller dishes into the upper tray;
- long and sharp utensils should be placed horizontally, in the upper basket.
The dishwasher cannot be overloaded. It is bad for the machine, to start. It also results in a rise in energy consumption. Thirdly, cutlery is not properly cleaned. It is therefore preferable to divide the large amount of dishes into two batches.
Leran dishwashers come with a tray for silverware and an upper and lower dish basket. Lightweight objects are loaded from above:
- mugs;
- saucers;
- coffee cups;
- gravy boats;
- small salad bowls;
- glasses.
Larger and dirtier items such as pots, baking sheets, saucepans, serving plates, frying pans, and lids belong in the lower basket. The item should be placed closer to the tray’s edge the larger it is. The inner side of the plates is positioned in the center.
On Leran dishwashers, the upper basket’s height is adjustable. You must move the rollers to other guides in order to accomplish this. It is possible to remove or lower additional glasses mounts.
Cutlery is placed one by one into a third, distinct basket. Spoons and forks shouldn’t be stacked inside of one another as this will degrade the wash quality. This area also contains mashers, spatulas, and skimmers.
Turning on your Leran dishwasher is a simple task once you know the basic procedures. Whether you’re washing large or little dishes, using the proper procedure will guarantee that your dishes are always clean.
For optimal results, make sure your dishwasher is loaded correctly and that the settings are selected. Before turning on the machine, remember to make sure the water supply is on and that the detergent has been added.
By following these guidelines, you should be able to operate your Leran dishwasher with assurance and effectiveness, streamlining and improving your dishwashing routine.
