First start-up of the Weissgauff dishwasher

It’s exhilarating to finally set up a new dishwasher, such as the Weissgauff model, and handle kitchen chores with ease. However, there is a little setup required for the initial start-up before you begin using it.

Setting up your dishwasher correctly guarantees that it functions properly right away. Assuring that everything is correctly connected, the filters are installed, and the appropriate cleaning supplies are prepared for use are all part of this process.

You can begin taking full advantage of your new Weissgauff dishwasher in a matter of easy steps. Let’s go over what you should do in advance of and during that initial start.

The Weissgauff dishwasher needs only a basic initial start-up to function properly. Remove all packaging materials first, then carefully place dishes in the dishwasher and add the suggested detergent. Verify that the drain hose is installed correctly and that the water supply is connected. Lastly, before beginning your first full load, choose a rinse or quick wash cycle to get rid of any remaining manufacturing debris. This first step ensures that your dishwasher is configured for maximum longevity and performance.

Commissioning the dishwasher according to the instructions

In order to avoid missing any of the most crucial details, such as how to connect the equipment to all communications at first and how to arrange dirty dishes in the washing chamber baskets, it is best to start the machine for the first time exactly as directed by the manufacturer’s official instructions. This is particularly significant because operating instructions vary not only between brands but even within individual models.

If you lack the requisite experience in connecting the machine to all communications, you should leave the initial connection to the water supply to a service center specialist.

The dishwasher needs to be idle—that is, it shouldn’t have any dirty dishes or other unnecessary items when it first starts up. This procedure is required because, if an equipment unit is assembled at the factory and is kept in a warehouse for an extended period of time, it may contain dust, oil, and factory dirt. In order to get rid of all these contaminants, the machine needs to be left idle for a while. During this time, no dishes should be inside to avoid contaminating it or interfering with the cleaning process. Furthermore, the exam provides a useful means of evaluating the "home assistant’s" performance:

• is tap water entering the washing chamber normally;
• is the machine"s operation not interrupted during washing;
• is there any water leaking anywhere during the working cycle;
• is the heating element heating the water in the machine to the selected temperature;
• the liquid inside the device circulates smoothly, and then completely goes into the drain.

It is crucial to observe the specified parameters and start the dishwasher correctly the first time, as these five points are critical to its regular functioning. You will have to complete several easy tasks in order to pass the test.

• Add salt, regenerating ion exchange resin and detergent to the equipment.

Only use salt and common household chemicals in dishwashers to avoid damaging the equipment’s internal parts while it’s running.

• Unlock the locking valve that supplies water to the machine.
• Connect the device to the mains.
• Turn it on the “Food” button.

• Choose the longest working cycle, which is usually an intensive sink program.
• Make sure that the door of household appliances closed to a characteristic click.
• Act a keys "Start".

You cannot start a full working cycle and fill the baskets with dirty dishes until you have verified that the idle start was successful. In addition to considering the type of table item, the program should be chosen based on the quantity of dishes. For instance, it is advisable to use the intensive mode for cleaning complex pollution, pans with stuck fat, and burned food, and the fast mode for cleaning poorly contaminated cutlery.

On contemporary Weissgauff machines, a very useful feature is the ability to alter a cycle if it was selected incorrectly. The cycle cannot be changed after the apparatus has begun using detergent, so this is the only thing that can be done. In order to modify, you must:

• open the door of the washing chamber;
• press and hold the button of the selected washing mode for a few seconds to cancel it;
• activate the correct program;
• close the door of the dishwasher.

The device will momentarily stop washing if you simply open the door while it is operating, but it will resume working 10 seconds after the door is closed. You can also load dirty dishes that you’ve forgotten to do so. Similar to altering the operating mode, this function is limited to being performed when the household chemical dispenser is closed. To accomplish this, adhere to similar guidelines.

• Open the door of the dishwasher and wait until the operation stops.
• Carefully load an additional portion of dirty dishes.
• Close the door and wait for the operation to start.

The machine will alert the user with a unique sound signal as soon as the wash is complete. It is then sufficient to switch off the machinery, open the washing chamber door, and give the dishes a few minutes to cool before continuing.

Substances for the first activation of the dishwasher

Certain household chemicals, like dishwasher salt, detergent, and rinse aid, are needed to keep the dishwasher running smoothly. Additionally, a dedicated cleaner needs to be purchased once every quarter.

For the ion exchanger to effectively soften hard, subpar tap water, salt needs to be present in the device. In order to accomplish this, you must both add salt granules to the device and modify the water hardness that the softening element must "fight" before it starts up for the first time. To complete all of this, you must:

• find the salt bin at the bottom of the washing chamber;
• unscrew the lid of the salt compartment;
• find a ring with an arrow on the tank;
• set the desired values ​​​​of the ion exchanger hardness;

Using specialized test strips or visiting the official website of the city water utility—which is required to consistently provide accurate data on the quality of water—you can determine the degree of hardness in the water.

• fill the tank with water to about two-thirds of its total volume;
• load about 1 kilogram of special salt into the compartment, for convenience using the funnel from the dishwasher starter kit;
• close the tank lid tightly.

The salt tank is filled with water just once, and salt needs to be added based on consumption; in certain areas, this needs to be done once a month, and in others, once a year. This will be communicated by the machine itself through a separate indicator on the device’s control panel. All of the aforementioned, however, does not hold true for a water source that provides exceptionally soft water, as there is no need for salt regeneration in this scenario.

Dishstains and unsightly plaque can be removed from dishes with the help of the rinse aid in the "home assistant," which also speeds up the drying process. The product is added automatically at the very end of the wash, so the user doesn’t need to worry about consuming it. It is sufficient to choose the appropriate chemical consumption by moving the lever to the desired position and adding the product to a dedicated tank that is situated on the washing chamber door. Since it can only hold 140 milliliters of liquid, it is best to fill it all the way before turning it on and to periodically top off the compartment.

Finally, because this chemical is available in multiple forms at once, including powder, liquid gel, and tablets and capsules, housewives have an extensive selection of detergents to choose from. Similar to rinse aid, this kind of household chemical is used to efficiently remove all kinds of dirt from dishes, but it needs to be put into a specific dispenser that is attached to the dishwasher door. When using powder, be mindful of the unique marking that denotes the recommended minimum detergent dosage, typically 20 grams. Everything is much simpler when using tablets and capsules because each functional program only requires one piece to be loaded.

Your Weissgauff dishwasher’s initial startup is a crucial step in making sure everything functions properly. You can help avoid problems early on by closely adhering to the instructions.

Ensure that the dishwasher is level and that all connections are tight. Its performance can be enhanced by adding the proper detergent and modifying the water settings.

After following these instructions, you can relax knowing that your dishes will be cleaned effectively and with little effort.

Video on topic

First start of the dishwasher #startupdishwasher #serviceathome

BOUGHT A Weissgauff DISHWASHER FOR MYSELF / HOW TO INSTALL A DISHWASHER IN THE KITCHEN

The first launch of the dishwasher Maunfeld MLP12i