Error F02 in a Whirlpool washing machine

You are aware of how annoying the F02 error on your Whirlpool washing machine can be if you have ever encountered it. When something isn’t quite right, this code shows on the display, leaving you to wonder what’s wrong and how to fix it.

This error typically indicates a drainage problem, which means your machine isn’t able to empty the water as it ought to. However, what causes it and—more importantly—how can it be fixed?

This post will explain the various causes of the F02 error and walk you through the process of fixing it so that your washing machine functions properly again.

Because of this mistake, the drum might not spin, leaving your clothes unwashed. You’ll need to inspect the wiring harness, the motor connections, and possibly the motor control board in order to fix it. In some cases, basic troubleshooting can resolve the problem; however, in more serious cases, professional repair may be required.

Why Aquastop worked?

Error code F02 alerts the user to the fact that the Aquastop system has just been used to prevent flooding on his floors and the ceilings of his neighbors below. This clever system operates simultaneously on the washing machine’s two sides: a sensor with a float is situated in the tray at the bottom, and an electromagnetic valve is mounted in the inlet sleeve. The system will do the following if the "home assistant" finds a leak:

• liquid will flow down the body and tank directly into the tray;
• when the water level is exceeded, the float will rise;
• when the float moves to a vertical position, the sensor will be triggered;
• a signal about a leak in the system will be sent to the valve mechanism, as well as an order to stop the intake of liquid;
• the valve will stop the water;
• the control module of the CM will stop working;
• the machine will switch off urgently.

As a result, when too much liquid builds up in the Whirlpool washing machine’s tray, the Aquastop system is triggered. Leaks are typically the cause of Aquastop’s activation because it rarely functions for no apparent reason. How come the tray could have gotten wet?

• The tightness of the drain or filling hose is broken – they could have torn or come off the tee.
• The clamps on the pipes have become loose.
• The washing machine tank is damaged.
• The powder receptacle is clogged due to the fact that the pipe in the hopper is clogged, or a foreign object is stuck in it.
• The seal has shifted.
• The drum cuff is deformed.

In the event that Aquastop is enabled, the device will shut down and display the error code F02. In the event that the apparatus lacks a display, a bright indicator will alert the user to the issue. Now that all potential causes have been identified, let’s proceed to diagnosis and repair.

We will eliminate the breakdown of Aquastop

You need to closely inspect as soon as the Avastop Domestic Assistant is activated. To accomplish this, you must first turn off the control system, remove the exhaust fluid, and investigate the specifics of what’s happening inside the cam case. Although calling a specialist at the service center is the simplest option, you can handle this straightforward issue on your own. How can the malfunction at home be fixed?

• Interrupt the activated working cycle, which can be done by translating the handle of the program switching to the "Off."
• Activate the drain mode.

Use the trash filter to drain all of the spent liquid if the dashboard is not responding to user commands.

• Disconnect the washing machine from the mains.
• Tilt the body of the apparatus until all the liquid from the pallet flows out.

It’s not until all the manipulations are complete that you can start diagnosing the "home assistant." When the water is taken out of the tray, the aquastop system automatically shuts off, and the float goes back to its starting position. However, if nothing is done to address the situation, the same issue will resurface during the following work cycle. As a result, it is essential to thoroughly examine every potential source of the malfunction.

The inlet hose should be fixed first because leaks can occasionally occur from it falling off the clamps or even cracking. If the inlet hose is operating properly, you should inspect the state of all other pipes leading to the tank, pump, and powder container in addition to making sure the main drainage hose is tight.

After that, you need to examine the pump and the snail, because if these parts of the drainage system are faulty, the outflow of water will stop, the washing machine will begin to overflow, and a leak will form. Then you should evaluate the cuff and dispenser, whether there are any cracks on them. If after this the cause of the malfunction is not identified, then you will have to partially disassemble the unit to check the seal and tank. Turning on the aquastop with a dry tray indicates that the sensor itself is damaged, so you need to test it with a regular multimeter. If it turns out that the aquastop itself is to blame, then repairs are not needed in this case – you just need to replace the element.

When a Whirlpool washing machine displays error F02, the motor circuit is likely having issues. It’s a frequent problem that can be brought on by a number of things, such as bad wiring, failed motors, or a broken control board.

Make sure the wiring connections are secure before attempting to fix this error. The motor or control board may need to be inspected and possibly replaced if the issue continues. Sometimes the error can be fixed with a straightforward computer reset.

By knowing what causes the F02 error and how to troubleshoot it, you can prolong the life of your washing machine and avoid having to make expensive repairs. Seeking advice from an experienced technician is always a good idea if you’re unsure or uneasy about carrying out these checks.

Video on the topic

Indesit washing machine error F-02. Resolved: module repair.

Whirlpool AWM 8101 Pro error f-02

Error F02 SMA (aquastop). Also relevant for other washing machines

Ariston washing machine error F02. How to check the tachogenerator, tacho sensor, of a washing machine

Errors – Whirlpool F01-FH-F02-FA-F03-FP