If you own a Haier washing machine, you may have encountered the CLR FLTR error code. Error codes can be very annoying, particularly if you’re unsure of the root of the issue. Don’t worry, though; CLR FLTR is actually a useful indicator that indicates a particular problem that you can fix with your washer.
CLR FLTR essentially stands for "Clear Filter," and it alerts you when the filter in your washing machine needs to be cleaned or is clogged. Because it helps catch dirt, lint, and other debris that might otherwise find its way into your machine or drain, this filter is essential. If left unattended, a blocked drain can impede the functionality of your washing machine and potentially lead to more severe problems.
This post will guide you through the process of fixing this error code so that your Haier washing machine can resume normal operation. We’ve got you covered with useful hints and advice to make this process as easy as possible, from finding the filter to properly cleaning it.
Thus, stay put if you’re looking at that CLR FLTR message and unsure of what to do next. We’ll assist you in quickly clearing that filter so you can resume doing your laundry.
| Topic | Error Code CLR FLTR on Haier Washing Machine |
| Description | This code indicates a filter blockage. It means the washing machine’s filter is clogged and needs cleaning. |
| How to Fix | Locate the filter, usually at the bottom front of the machine, and clean it thoroughly. Refer to your user manual for specific instructions. |
| Prevention | Regularly check and clean the filter to avoid future issues. Make sure to remove any debris or lint that could cause blockages. |
- What is this long code?
- Additional reasons for poor water drainage
- Getting rid of excess liquid
- Find and remove the pump for cleaning or replacing
- Video on the topic
- Haier Washing Machine Error | Front Load Washing Machine
- Checking the filter on Haier HW80 Washing Machine
- The Haier washing machine shows this error
- CL error in the washing machine. What to do and how to fix it
- Haier Washing Machine Error Code E1 or CLR FLTR, was soll ich tun?
- Haier washing machine water not draining/ E1/ CLr FLTr
- Error E1 in the Haier washing machine (Eng subs)
What is this long code?
It is indeed frightening to see such a long error code. Actually, the machine has not suffered any harm. The Haier washing machine is unable to empty the tank of water within the program’s designated time, according to error CLR FLTR.
Garbage filters that are clogged are the most common cause of the CLR FLTR error.
The error indicates that there is a problem with the tank’s waste water drain. The liquid is typically prevented from passing through a "garbage plug" that has formed in the filter. Thus, it is essential to check the filter element first.
The CLR FLTR error is self-resettable. This is typically a banal obstruction rather than a breakdown. Only a small percentage of cases need repair. Let’s investigate further potential causes of the washing machine tank waste liquid draining difficulties.
Additional reasons for poor water drainage
One of the potential causes is a clogged garbage filter. When a user sees the error CLR FLTR on the screen, they must rule out other issues. Let’s investigate further potential causes of draining difficulties in washing machines.
- Clogged drain hose. Soap deposits and dirt settle on the walls of the corrugated pipe, scale forms. All this prevents water from flowing calmly into the sewer. It is also possible that the tube is squeezed by a heavy object, the hose is bent.
- Clogged sewer pipe or siphon (if the machine is connected through an elbow). In this case, the problem is not in the washing machine, a plumber will help to fix the situation.
- Clogged or broken pump. This is the "heart" of the drainage system. The pump pumps water from the tank through the pipes into the hose, and then into the sewer. When the element breaks, the liquid remains static. The cause of the malfunction may be a manufacturing defect, natural wear, blockage of the impeller blades, short circuit.
- Failure of the control module. Electronic unit – the "brain" of the washing machine. It coordinates the work of all other units. Due to a breakdown, the microcontroller may stop signaling the need to drain, so the pump will not start pumping water. Repairing or replacing the board will help to fix the problem.
- Broken level sensor. The pressure switch determines the amount of water in the tank and transmits this information to the electronic module. If the element is “malfunctioning”, the readings will be incorrect. For example, the tank will be full, and the sensor will inform about the lack of water. Then the control unit will not give the command to drain.
- Incorrect installation of the drain corrugation. It is important to position the drain hose of the washing machine “according to science”. As – it is said in the instructions for the equipment. It should bend in a certain way, and its connection point should be at a distance of 50-80 cm from the floor level. If the standards are not followed, a “siphon effect” may occur. As a result, water will not leave the tank.
The length of the drain hose is crucial because problems pumping water from the tank to the sewer may occur if it is longer than the advised 1.5 meters.
- Damaged wiring. The drain may not function due to a break in the internal wiring. Finding the problem area is quite difficult, you may need the help of a specialist.
The majority of the time, you can fix the washing machine yourself. Cleaning the garbage filter, snail, hose, or pipes usually solves the issue. Haier washing machines are known for their reliable electronic module, which is why it is inspected last.
Getting rid of excess liquid
The Haier automatic machine stops with a full water tank because it detects the CLR FLTR error in the middle of the cycle. You will need to empty the washing machine first. Models of this brand use the same forced drain procedure as other models. Mechanism of action:
- de-energize the washing machine;
- turn off the valve responsible for the water supply;
- cover the floor around the automatic machine with dry rags;
- prepare a low but roomy container for collecting water;
- find the technical hatch door in the lower part of the washing machine body, open it;
- place a container under the body of the washing machine, in the location of the "garbage can";
- unscrew the plug of the garbage filter by half a turn;
- collect the water flowing out of the hole in a container.
Replace the plug, empty the container of water, and repeat the process if the basin overflows. An emergency drain in the laundry Haier It is done through the garbage filter’s opening. Even when the filtering spiral is fully removed, there are situations when the liquid does not flow smoothly. The obstruction is then located here.
When your Haier washing machine displays the error code CLR FLTR, it means that the filter needs to be cleaned or serviced. This code usually appears when the washer detects a restriction or blockage in the filter, which may cause other problems and impair the washer’s performance. Knowing how to quickly fix this issue will help you keep your washing machine operating smoothly and prevent more serious issues.
Find and remove the pump for cleaning or replacing
You must look for a drain pump clip if the garbage filter is clean. There is a minimal set of tools needed for the task. You must have available:
- cross and slotted screwdrivers;
- spanner;
- dry rag;
- water collection container.
It’s simple to get to the pump. The manufacturer recommended routine cleaning in addition to streamlining the pump’s accessibility. De-energize the machinery and shut off the shut-off valve before beginning repairs. Having a phone nearby to take pictures of each step of the disassembly process is also advised.
To take out the drain pump from the housing of the washing machine:
- cover the floor with a blanket;
- lay the Haier washing machine on its side;
- if the machine has a tray, remove it;
- remove the bolts holding the pump;
- turn the pump from right to left, slightly press it into the machine body and take it out;
- disconnect the wires and pipes from the pump.
At this point, you will hold the pump. First, examine the impeller’s integrity and eliminate any hair or threads that may have wound around the blades. Next, take the part apart and give the pump a thorough internal cleaning. Well rinse the element.
Next, put the pump back together and "plug" it in. Wires and pipes should be connected to the pump. Fasten the component with bolts and replace the tray. Place the automated device in an upright position.
Make sure to run a test cycle without laundry and watch how the washing machine operates after making any local repairs.
You must keep an eye on the machine when it is being tested. The repair is finished if the washing machine operates without issue and does not display an error message. No, you need to take further action.
When your Haier washing machine displays the error code CLR FLTR, it can be a little unsettling, but it’s usually easy to fix. This error usually means that the filter needs to be cleaned, which is an important part of keeping your machine in good working order. Lint and debris can clog the filter over time, which will reduce the efficiency of your washer.
Make sure the machine is off and unplugged before attempting to resolve this issue. Find the filter, which is usually located behind a small panel at the front bottom of the machine. Take out the filter, give it a good cleaning, and make sure there is no debris left. Replace it after cleaning, then tighten the panel back into place. Restart the computer after the power is back on to check if the error code has disappeared.
Frequent maintenance can stop this error from happening again, including cleaning and inspecting the filter. Incorporating this into your routine will help you avoid disruptions and prolong the life of your washing machine. It could be worthwhile to hire a professional for additional inspection to look into any underlying problems if the error continues after cleaning.
