Error E01 on the Beko dishwasher

You’re not the only one if your Beko dishwasher has displayed the E01 error code. Although this is a common problem that many users encounter, it can be somewhat confusing at times. You can save time and stress by learning what this error means and how to fix it.

Usually, the E01 error indicates a problem with the dishwasher’s heating mechanism. There could be an issue with the heating element, or occasionally it could have to do with temperature sensors. If you’re unfamiliar with these parts, don’t worry; we’ll break it down into easy steps.

We’ll examine the root causes of the E01 error and offer workable fixes in this guide to help you repair your dishwasher. We’ll make the process easy for you to handle, whether you’re a DIY enthusiast or just need some guidance.

The most common malfunctions causing E01

The presence of water overflow in the Beko dishwasher does not always indicate a malfunction. It’s possible that there’s another cause, something you can easily take care of on your own.

• Cleaned garbage filters. These filter elements are located at the bottom of the dishwasher washing chamber. During operation of the device, they can become clogged with food debris, bones, napkins, glass fragments and other foreign objects. It is because of the blockage that water sometimes cannot pass through the filters, which can be corrected by thoroughly cleaning the filter elements.
• Increased pressure in the water supply. Because of this, the flow sensor will not work properly, because it will not have time to open the reed switch, so the Beko dishwasher will fill too much liquid. You can fix the problem by officially contacting the company responsible for the water supply in your area, or you can slightly close the water supply shut-off valve to reduce the pressure.
• Short-term failure of the dishwasher control module. Another reason for the E01 error is a one-time failure of the control board, which could mistakenly fill in too much liquid. In this case, you need to reset the current cycle to reboot the control board. To do this, you need to disconnect the household appliance from the network for about 15 minutes, and then try to start the sink again. If after these manipulations everything is fine, then the reason was a one-time failure, otherwise you will have to call a service center specialist.

If any of the above scenarios apply to you, you must not only resolve the issue but also empty the tray of all water. This is required to prevent the Aquastop protection from activating the drain pump once more.

The water supply valve is “moping”

The failure of the inlet valve, which is made up of a membrane and an electromagnetic coil, could also result in the error code appearing. The designated membrane may stop working normally if the Beko dishwasher fills with too much water. This membrane occasionally deforms and even breaks into pieces, which is why it stops obstructing the water flow.

In the event that this occurs, water will enter the machine continuously even though the inlet valve is fixed in the closed position.

When equipment is left in an unheated room over the winter, the residual water in the valve freezes and damages the membrane, which is why this happens frequently.

Housewives will notice that the Beko dishwasher is overflowing through the door or drainage hoses into the tray, in addition to the fact that it has started to collect too much water, if the inlet valve is indeed the source of the problem. Subsequently, the Aquastop system will be activated, leading to further issues. The valve is extremely difficult to repair; purchasing a new one is far simpler.

Error E01 on your Beko dishwasher is probably a common problem that can cause disruptions to your daily routine in the kitchen. This error typically indicates an issue with one of the internal components or the water supply of the dishwasher. You can restore your appliance to optimal operating condition by comprehending the root causes of this error and learning how to resolve them. We’ll examine the most common causes of Error E01 in this post and walk you through the necessary steps to fix it.

The pressure switch does not work

One may also experience Error E01 if their pressure switch is broken. The system requires this water level sensor in order to accurately record the volume of liquid collected and communicate precise data to the Beko dishwasher’s control module. The machine won’t be able to recognize when the water supply needs to be turned off if it is malfunctioning. Most frequently, a pressure switch component or several components break:

• the sensor tube, which could have come off its seat, become clogged, or failed due to strong vibrations of the dishwasher;
• pressure sampling chamber, which is negatively affected by impurities of poor-quality tap water, food residues, as well as undissolved household chemicals. All of the above can clog the chamber;
• the sensor coil could also fail due to a sudden voltage drop.

How can this be resolved as soon as possible? Disconnecting the Beko dishwasher from all communications, making sure that all parts are free to access, removing the tray, locating the water level sensor, carefully removing it, and using a multimeter to check it are all necessary steps. It also has a blow pipe that produces audible clicks that are easy to distinguish. The element must be changed if it is defective.

Flowmeter is broken

The water flow sensor, which aids the water level sensor in recording the current amount of liquid, is another frequent cause of the E01 error. The liquid intake won’t stop on time if the part is jammed because it can’t detect the water level precisely.

The flowmeter, like many other important parts of the Beko dishwasher, is only replaceable with a new element and cannot be fixed. To purchase an appropriate replacement part for the PMM, take the damaged sensor to the store as an example.

In conclusion, a Beko dishwasher’s E01 error usually indicates a problem with the water supply, which is frequently connected to a blockage in the water line or an issue with the inlet valve. First things first, make sure the water supply is turned on and flowing correctly if you experience this error. Quick fixes like clearing the inlet filter or making sure the hose isn’t kinked could potentially solve the problem.

You might need to look more closely if these preliminary corrections don’t fix the problem. It can be very important to check the inlet valve for problems or possible leaks. In certain cases, if a valve isn’t working properly, it may need to be replaced. Contacting a qualified technician could ensure that the repair is done correctly and save you time if you’re not comfortable handling it yourself.

Recall that frequent maintenance can aid in averting such problems. Later on, more serious issues can be avoided by monitoring the performance of your dishwasher and taking care of any minor issues as soon as they arise. Your Beko dishwasher can continue to serve you well and take care of your dishwashing needs with a little upkeep.

Video on the topic

Beko dishwasher problems

Beko dishwasher error and repair. ER code 1 error

Beko dishwasher, E01 error, found why water accumulates at the bottom of the tray

The dishwasher does not work (does not turn on) / Just turn the dishwasher over

Delonghi Error E1

The dishwasher does not get water. Water overflow in the tray, pumping it out. Error E01. DIY repair.