Has your Candy washing machine ever started to jerk around while it was in the spin cycle? This may be more than just a bothersome noise; in fact, it may be a sign of a more serious issue that requires attention.
Excessive shaking or vibration in a washing machine is often an indication that something is wrong. If you take care of an imbalanced load, an uneven floor, or a more serious mechanical issue as soon as possible, you can avoid more damage.
This post will discuss the typical causes of your Candy washing machine’s spin cycle jumping and provide workable fixes to assist you in fixing it. Let’s get started and restore the smooth operation of your washing machine!
| Possible Causes | Solutions |
| Unbalanced load | Redistribute the laundry evenly in the drum. |
| Washing machine not level | Adjust the feet to ensure the machine is level on the floor. |
| Shock absorbers worn out | Consider replacing the shock absorbers if they are damaged. |
| Incorrect installation | Check if the machine is installed according to the manufacturer"s instructions. |
Why the machine "likes to jump"?
Throughout the cycle, any automatic machine vibrates. This is particularly apparent when spinning. Although not completely, dampers and counterweights reduce the resulting centrifugal force. As a result, it is acceptable for the washing machine to shake slightly while it is operating because it does not bother the other members of the household or raise any concerns.
If the washing machine starts to thunk and rattle its way across the room, that’s a whole other story. Diagnostics will be necessary in this case. Errors that occurred during the washing machine’s installation may account for some of this "behavior" in the machine.
As a result, check that the machine’s body is level first. Adjust the device’s feet if there is a skew. Additionally, notice that the floor beneath the washing machine should be hard and level.
For what other reason might the Candy washing machine jump and make noise while it spins? There are multiple likely causes:
- drum imbalance;
- violation of the permissible load weight (it can be either excess or underweight);
- unremoved transport bolts (typical only for new washing machines, started for the first time);
- a foreign object that has fallen into the space between the tank and the drum of the washing machine (this can be a coin, button, hairpin, bra bone);
- wear of the shock absorption system elements (dampers or springs);
- damage to concrete counterweights or loosening of weight fastenings;
- engine failure;
- wear of drum bearings.
If your washing machine is rattling and jumping, you should stop using it and instead begin repairs and diagnostics right away.
Most issues are manageable on your own. For instance, you can fix shock-absorbing components, tighten fastenings, and replace bearings or counterweights by hand. Let’s determine where to begin the diagnostic process.
Problem search algorithm
Self-diagnosing is not advised if the washing machine is still covered by warranty. It is advised to get in touch with a service center in this situation. Experts will inspect the washing machine at no cost to you and replace any broken parts (assuming, of course, that the breakdown was not caused by the user disobeying operating regulations).
If the warranty is no longer valid, you can attempt to fix the issue at home. Observing how the automatic machine operates should be your first step. Finding out when it starts to knock and jump after washing is crucial.
Diagnostic procedures range from easy to difficult. Unbalanced drums can cause Candy washing machines to occasionally start jumping. The metal tank deviates from its intended course and begins to collide with the tank’s walls. Such touches cause the body to vibrate and make loud noises.
The following may be the cause of the drum imbalance:
- the laundry gets knocked into a lump, and this “ball” is located mainly in one of the parts of the drum;
- the user violates the maximum permissible load weight of the washing machine manufacturer.
- the total maximum and minimum permissible load weight;
- the recommended load weight for each washing mode separately.
Every program has its own requirements. For instance, the maximum load weight that a particular model can have in the "Cotton" mode is acceptable. Generally speaking, you can only fill the drum with 1.5–2 kg of items when using the "Wool" algorithm.
If a recently installed Candy washing machine jumps, it might be because the transport bolts aren’t off. They are made to secure the drum, so when the machine is being transported, the container doesn’t hang loose. The washing machine’s fasteners need to be taken out before the first start.
Candy automatic machines cannot be started without the transport bolts removed.
The transport bolts’ primary function is to fasten the drum firmly. The screws are preventing the container from unscrewing when the wash is underway. The motor is prone to burning out and will operate at its highest speed. For this reason, when using the washing machine for the first time, it is crucial to remove the fasteners.
A foreign object that has fallen into the washing machine’s tank could be the cause of the noise if it continues to make noise throughout the cycle. Bras should be washed in special bags and pockets should be thoroughly inspected before placing items in the machine to avoid this. The foreign body can be taken out of the tank by disassembling it or by using the "nest" beneath the heating element.
The shock absorbers should be checked next. It is their responsibility to reduce the centrifugal force and keep the machine from shaking excessively. When shock absorbers get worn out, they can no longer function at 100%, which causes the washing machine to start jumping and making noise.
To ensure that the springs and shock absorbers are functioning properly, you must:
- de-energize the machine;
- remove the top cover of the Candy case;
- press hard on the tank with both hands so that it drops 3-5 cm;
- suddenly stop pressing;
- observe the behavior of the tank.
The shock absorbers and springs are doing their jobs if the plastic container instantly goes back to its original position. There are evident issues with the shock-absorbing components when the tank hangs there for a while. Parts will need to be replaced or repaired.
Next, give the counterweights a thorough inspection. First, make sure all of their fasteners are securely fastened. Increasing the clamp tension is sometimes sufficient to stop shaking. It is preferable to replace the blocks if the weights have noticeable flaws, such as deep cracks.
Strong vibration and shaking of the machine are not the only signs of bearing failure. The noises produced by the washing machine are loud, resembling grinding and clanking. The rear of the tank may also develop rusty streaks.
It will be necessary to replace the seal along with the bearings. In this instance, you will have to take the washing machine apart entirely, take out the tank, and divide it in half. Subsequently, the outdated rings are removed by pressing and replaced with new parts.
There may have been a manufacturing defect if all other reasons were ruled out. These kinds of issues typically surface during the washing machine’s first year of use, right before the warranty expires. Consequently, contacting the service center for a free diagnostic is your best bet in this situation.
Something is wrong with your Candy washing machine if it is bouncing while the cycle is spinning. Simple issues like an unbalanced load, an uneven floor, or worn-out shock absorbers are frequently the cause of this problem. You can lessen vibrations and maintain the stability of your machine while it is operating by taking care of these factors.
The secret to keeping this issue from happening again is routine maintenance. Make sure the washing machine is level and avoid piling too much laundry in it. Should the problem continue, it may be necessary to inspect or replace parts such as the drum bearings or shock absorbers.
By taking care of these problems as soon as they arise, you can prolong the life of the washing machine and avoid future expensive repairs.
If the spinning cycle of your Candy washing machine is interrupted, it may be the result of an uneven load, incorrect leveling, or worn-out shock absorbers. These problems may result in excessive vibrations from the machine, which would make it unstable. Redistributing the laundry or making sure the machine is on a level surface are two simple fixes that frequently resolve problems. However, if the problem persists, a more thorough inspection or repair may be required.
