You’re not the only one if your Haier washing machine has ever displayed the FC2 error code. This can be a confusing and annoying problem, particularly if you’re in the middle of doing laundry. But don’t worry, you can troubleshoot and solve the issue more quickly if you know what this code means.
Usually, the FC2 error code indicates a drainage system issue with the washing machine. A clogged hose, a blocked drain filter, or a pump problem could be the cause of this. Identifying the possible culprits can aid in problem narrowing and speed up the solution-finding process.
We’ll guide you through a few easy steps in this article to identify and resolve the FC2 error. We’ll go over the essentials to help you get your washing machine back in working order, from cleaning the hoses to checking the drain filter. Together, let’s take on that bothersome error code.
| Error Code | FC2 |
| Description | Communication error between the control board and the motor |
| Possible Causes | Loose connections, faulty wiring, or a malfunctioning control board |
| Solutions | Check and secure all connections, inspect wiring, or replace the control board if necessary |
When your Haier washing machine displays error code FC2, it typically indicates a problem with the drainage or water supply system. This guide will examine typical causes and effective fixes to assist you in resolving the problem fast and guaranteeing the smooth operation of your machine.
Testing the engine
The machine motor’s operability can be verified by you; all you need to know is how to do it. Studying the kind and workings of the engine that is installed in the unit will be necessary. Haier washing machines, for instance, have collector motors that run on a drive belt. They are easier to use and more portable when compared to inverter ones. They do have a drawback, though, which is that the "collectors" frequently fall through, which means you will eventually have to serve them.
These engines are composed of a stator, rotor, and two electric brushes. The mechanism’s internal current transmission is handled by the winding and lamellas. A sensor that regulates the engine’s revolution gain is also located within the motor. When performing self-diagnosis, it is imperative to check each of the aforementioned components in turn. However, you must first do the following:
- remove the back panel from the CM body;
- pull the drive belt off the pulley;
- find the engine, which is located under the tank on the right side;
- take a photo of the chip or remember the location of the terminals, so that it would be easier to connect everything back later;
- turn off the wiring connected to the motor;
- loosen the fixing bolts;
- rock and remove the engine from the "socket".
First, we examine the engine directly. This is a very easy process. It is required to connect the rotor’s veins to the stator windings and apply a 220 volt voltage to them.
The gadget is operating correctly if the motor turns on and starts rotating the shaft.
In this scenario, you can move on to inspecting each part of the "home assistant" mechanism separately. In the event that there is still no movement, a malfunction is obviously present. In this case, repairs are going to be necessary.
Remember that you need to take extra care even when testing in a straightforward manner. Firstly, in order to prevent unpleasant situations, you should exercise caution when handling voltage. Second, if the motor is connected directly, you must prevent it from overheating. It is better to be safe and turn on the heating element, which will heat up and absorb the impact in the event of a current leak. Thirdly, it’s important to keep in mind that these diagnostics only address the most obvious issues and don’t provide a comprehensive picture of how the part operates at various speeds.
It is worth looking at the brushes
The electric brushes are the next diagnostic step. They are mounted on the motor body and use carbon tips that have been specially made to reduce friction. The motor overheats and sparks if they wear out. When the board notices this, the FC2 error is displayed. To examine the state of the electric brushes, you must do the following:
- unscrew the fixing bolts;
- compress the spring;
- detach the brushes from the body;
- open each "case";
- measure the length of the tips.
Keep an eye out for the Haier model’s serial number when selecting replacement parts. An error code will show on the display if one of the brushes has "carbon" that is shorter than 1.5 cm. In this case, replacing both rods in pairs is the only viable option. New case installations are completed by following the directions in reverse order.
Although it can be a little annoying, the FC2 error code on a Haier washing machine typically doesn’t indicate a serious issue. This error usually indicates a problem with the drainage system of the machine. If you’re seeing this error, there probably is a blockage or a pump issue that’s keeping the water from draining correctly.
First, look for any obstructions in the drain hose and filter in order to address the FC2 error. Tiny objects like pennies or lint can occasionally become stuck and cause problems. Frequently, cleaning these components will fix the issue and restore your machine’s smooth operation.
If clearing the hose and filter doesn’t resolve the issue, the pump itself may be the source of the trouble. If so, it could be worthwhile to get in touch with an expert to have a closer look. They can examine the pump to make sure everything is operating as it should.
Recall that although error codes can be annoying, they are frequently intended to assist you in identifying problems promptly. Your Haier washing machine can usually be restarted with little difficulty if you perform some troubleshooting.
