Zanussi washing machine does not fill with water

Are you having problems getting water to fill your Zanussi washing machine? You’re not by yourself. This problem can be annoying, particularly if you’re eager to finish your laundry. Thankfully, there are frequently simple causes and solutions for this issue.

There are several typical causes for why the water in your washing machine might not be filling up. A kinked hose or a closed water valve could be the culprit. Occasionally, a blockage in the filter or a problem with the water inlet valve could be the cause. Comprehending these possible issues can facilitate efficient troubleshooting.

We’ll look into the common suspects behind a washing machine that won’t fill with water in this article. We’ll also provide helpful hints to assist you in locating the issue and resolving it swiftly. So that you can smoothly resume washing your clothes, let’s get started!

There are a few common problems that could be the cause of your Zanussi washing machine not filling with water. Look for issues such as kinked hoses, clogged inlet filters, or closed water supply valves. Furthermore, confirm that the machine’s door is completely closed and that there is sufficient water pressure. Resolving these basic problems can frequently restore your washer’s functionality.

Let"s list the possible malfunctions

Since you cannot use a machine to wash something dry, you must address the filling issue right away. It is best to look for a potential solution as soon as possible. Luckily, a blocked or absent central water supply may be the cause of a problem rather than an empty drum always signaling a breakdown.

A loosely locked door is the third "non-repairable" reason. The control board needs to check that the drum is tight before washing. The electronic lock fails to function if the hatch is not forcefully closed, which indicates that the system rejects the cycle’s beginning.

Water intake issues are frequently the result of obvious malfunctions and breakdowns. The lengthy list of components, which includes the control module, hoses, and inlet valve, makes diagnostics challenging. Users thus frequently experience eight malfunctions.

1. Damaged inlet valve. This device controls the water supply to the machine. If it fails, the membrane stops responding to the signal sent by the board – the “entrance” to the machine will remain locked. It is easy to confirm the malfunction of the valve sensor: just connect to the power supply and apply voltage to it. A working system will close and make a characteristic click, and a broken one will “remain silent”.
2. Clogged filter mesh. The Zanussi inlet hose has a special filter attachment, on which a significant portion of dirt and impurities in tap water settles. Naturally, over time, the part becomes too clogged and does not allow the water flow to enter the machine under the required pressure. In this case, the machine hums when trying to fill the drum, but to no avail.
3. Overflowing inlet filter. Like the mesh, the coarse filter, installed even earlier – right in the water pipe, also suffers from dirty water. It is this filter that receives the main "dirty" blow, and without regular cleaning, a blockage is possible with a subsequent stop in the intake into the machine.

Look at the screen before attempting to find the source of the malfunction; the Zanussi self-diagnostic system may show an error code!

1. Broken pressure switch. This is a water level sensor that controls the degree of filling of the drum. If the device fails, then the electronic unit, not receiving information about the fill, turns off the system for safety and to prevent leakage. To test the pressure switch, you need to remove the top cover of the housing, find the device, unscrew the bolts holding it, take it out and blow into the tube. A few clicks should sound in response to the air flow. Their absence will prove the fact of a breakdown or blockage.
2. Problems with the pressure switch hose. Sometimes it is not the sensor itself that fails, but the pipe connected to it. It gets damaged, becomes leaky and prevents the device from monitoring the water level in the drum.
3. Problems with the inlet hose. If the hose is pinched by the housing or kinked, then the water will not be able to reach the machine.
4. A non-functioning pump. Before collecting a portion of clean water, the machine always drains some of the old water left in the tank after the previous wash. If the pump cannot pump out the liquid, then the board does not give the command to fill.
5. A “frozen” control board. It is the electronic module that is responsible for distributing commands and collecting information from the main units of the washing machine. If there is a problem with the unit with triacs, microcircuits or tracks, the system cannot cope with the task and stops Zanussi.

By automatically self-diagnosing the system and displaying the error code on the display, modern Zanussi machines facilitate the user’s search for the cause. In this instance, all you have to do is retain the combination that is shown and decode it using the guidelines. Others will have to physically search for a breakdown, examining each issue that results in an empty drum.

Features of finding a breakdown

Determining on your own why water isn’t being poured into the machine is not too tough. The most important thing is to proceed cautiously and consistently, having already cut Zanussi off from the electricity and water supplies. The simplest options must be ruled out first:

• make sure that the central water supply is functioning and there is water in the pipes;
• check that the tap supplying water to the machine is open;
• unhook the inlet hose from the body and check for blockages, cracks or kinks.

Ignoring the issues, we proceed in the direction of the filter-mit. It is a circular nozzle that is attached to the assault rifle case at the junction of a bulk hose. To assess his health, you will need:

• unhook the pouring hose from the Zanussi case;
• Find a filter skeleton;
• take the pliers for the existing ledge on the filter and pull on yourself;
• Clean the grid under the pressure of water (if necessary, clean the toothbrush or soak in a lemon solution);
• insert the filter into the seat, and then attach the hose.

There might be leftover water in a bulk hose from earlier washes; make sure to empty the sleeve first!

There won’t be any water poured, and the rough cleaning filter will be clogged. It is installed right behind the tap, straight into the water pipe. In order to fix the issue, you will need to disconnect the bulk hose and unscrew a few parts. The resultant hole will shoot a stream that will wash the filter mesh. The most important thing is to prepare the stream by placing a basin beneath it.

Before contacting a professional, there are a few important things to check if your Zanussi washing machine isn’t filling with water. Make sure the hoses are connected correctly and that the water supply is turned on first. Water flow into the machine can be readily interrupted by a kinked or blocked hose.

Examine the water inlet valve as well. It could be preventing water from entering if it’s clogged or broken. Usually, the problem can be resolved by cleaning or replacing the valve. Furthermore, make sure the filters are clean because a clogged filter can stop the flow of water.

It could be necessary to speak with a technician if you’ve looked through these common issues and the problem still exists. Occasionally, the issue might be more complicated, like when an internal component breaks down. Frequent maintenance can assist in averting future occurrences of these problems.

Video on the topic

Zanussi does not collect water, repair

Zanussi washing machine does not spin the drum, but drains and fills with water.

ERROR no water intake ZANUSSI

3 Reasons why the washing machine does not collect water

Zanussi, Diagnostics mode.