It can be very helpful to know where the pressure switch is on your Candy washing machine, especially when troubleshooting problems like low water levels or a non-starting machine. A tiny but essential part, the pressure switch is essential for keeping an eye on the water level inside the drum.
Locating this portion may appear difficult at first, but with some assistance, it becomes much more doable. When repairs are necessary, knowing its location can save you a great deal of time and effort by enabling you to verify that it is operating correctly.
We’ll walk you through finding the pressure switch in your Candy washing machine step-by-step in this article. Regardless of your level of experience with do-it-yourself projects or your desire to save money on needless service calls, following this guide will simplify and streamline the process.
- What kind of sensor is this and what function does it perform?
- Search and extraction of a level sensor
- Video on the topic
- Review of the Candy CS41051D1 / 2-07 5kg washing machine
- How to check the inlet valve of the washing machine (on any model)
- Where is the pressure switch in the Indesit washing machine
What kind of sensor is this and what function does it perform?
Finding the pressure switch in the Candy washing machine is very simple; all you have to do is take off the top panel of the machine body, which requires removing the fastening screws beforehand. The actual level sensor is situated in the corner close to the SM’s side wall. It appears to be a tiny piece of corrugated plastic that somewhat resembles a hockey puck. It comes in a variety of colors, but the most crucial feature is that wires are attached to it from the washing machine’s two walls as well as a tiny tube at the end.
Depending on the Candy washing machine model, the water level relay may be different. For instance, it may be smaller and have wires that extend from just one wall of the case.
The element got its name due to the fact that it is actively connected to pressure (in English this is the word "pressure"). Contrary to popular belief, this part does not respond to water, but to the pressure that the liquid creates due to the fact that it gets into the tank of the device. In this case, the higher the pressure, the stronger the pressure of the air will be, which goes to the sensor through a thin plastic tube. Accordingly, when there is enough water for the selected working cycle, the air begins to actively press on the membrane, which is inside the device and closes the contact. Thus, the sensor sends a signal to the control module, which transmits an order to stop filling with water, which also happens in reverse order.
However, the Candy washing machine won’t be able to begin the cycle if the press begins to respond to pressure because it won’t get confirmation that there is enough liquid in the system for washing. For this reason, you should familiarize yourself with the contacts and water level relay in such a scenario.
Search and extraction of a level sensor
Rush with the disassembly and still-checking even though the Candy washing machine is situated in a section of the case that is easily accessible. This is because independent analysis will cancel free maintenance if your "home assistant" is still covered by warranty. For this reason, if the warranty hasn’t expired, it’s best to leave the repair to the pros. If not, you can open the machine with composure by following our instructions.
- Disconnect the Candy washing machine from all communications, which should be done as a precaution.
- Remove the cover of the washing machine, having previously unscrewed all the fasteners from it.
- Find the water level sensor located on the right wall of the case.
- Remove the retaining screw and connector so that you can then easily pull the relay out of its seat.
- Loosen the clamp with pliers or a similar tool, and then remove the pressure switch itself.
Since not everyone has a multimeter at home, let’s examine the device manually first. You will need to use a basic homemade tool for this, which is a short length of tube whose diameter matches the sensor tube. After putting the tube inside the pressure switch nipple, listen and gently blow into it. Your actions should cause a quiet click to indicate that the relay is handling pressure correctly. The element needs to be replaced if it is "silent."
| Part of the Washing Machine | Location of the Pressure Switch |
| Top Panel | Located behind the control panel, typically on the right side under the top cover. |
| Side Panel | Sometimes found behind the side panel, depending on the model. |
If you know where to look, you can easily locate the pressure switch in your Candy washing machine. This little but essential part regulates water levels during the wash cycle, which is essential to the proper operation of your machine.
You can diagnose problems and, if necessary, replace the pressure switch by carefully following the steps to access it. To protect your safety, always remember to unplug your computer before beginning any work.
Knowing where important parts, such as the pressure switch, are located will make it easier for you to maintain and extend the life of your washing machine.
The pressure switch on a Candy washing machine is typically located close to the top of the device and is reachable by removing the top panel. This little round part, which is attached to the drum with a thin hose, is essential for keeping an eye on and controlling the water level during every wash cycle. To find the pressure switch, unplug the device, remove the top cover, and locate the circular component that is connected to the drum area via tubing. Knowing the location of the pressure switch on your Candy washing machine can help you identify and resolve common problems with the drainage and intake of water.
