The filter may be to blame if you’ve ever used a washing machine that doesn’t seem to clean clothes as well as it should. In order to prevent debris, lint, and other particles from impairing the functionality of your machine, filters are essential. It can be a little difficult to locate and clean the filter on a Samsung washing machine if you don’t know where to look.
Depending on the model, the filter in a Samsung washing machine is usually located in one of several locations. Usually, it is located at the front bottom of the machine, behind a tiny panel or door. You must look in order to reach the filter so that it can be cleaned. Occasionally, the filter is contained in a tiny opening that can be opened with a simple twist or pull.
Cleaning the filter is an easy task once you’ve found it. You can increase the effectiveness of your washing machine and avoid clogs by clearing any lint or debris from the filter. Maintaining the filter on a regular basis guarantees that your machine keeps working efficiently and that your clothes are clean and fresh after washing.
Checking and cleaning the filter is a great place to start if your Samsung washing machine isn’t functioning properly or if you just want to keep it that way. Your washing machine will thank you for paying attention to this tiny but crucial part by operating more efficiently and lasting longer.
- Search for a part
- Signs of the need for cleaning
- Cleaning the trash filter
- Video on the topic
- How to clean the filter on the Samsung Diamond
- Cleaning the filter on the Samsung WW60K40G00WDLP washing machine
- Why is it important to clean the drain filter of the washing machine!
- Video review: Samsung washing machine WF0408N2N. How to clean the filter and dismantle the powder tray.
- review instruction washing machine Samsung biocompact fuzzy s821, s1021, s832. s621
Search for a part
Samsung’s contemporary washing machines come with a filtration system. More specifically, we are discussing two filters that are situated at various machine "ends." Even with their great placement and design, they serve the same purpose: they shield the washing machine from dirt and other objects. The machines are equipped with the subsequent filters:
- Inlet. Located at the very “entrance” to the machine behind the inlet hose. Necessary for primary purification of water from impurities, scale, rust and small debris, which the central water supply is “rich in”.
- Drain. Also called drainage and garbage, and unlike the filler, it is located at the "exit" of the machine. The "garbage bin" protects the pump and the sewer hose from debris and foreign objects that get into the drum with things. For example, if coins or keys fall out of your pocket during washing, the filter stops them, preventing them from passing through the drain, blocking the impeller and damaging the pipes.
To soften tap water, the manufacturer suggests adding more filters to the washing machine.
The "garbage bin" usually needs to be cleaned. It’s easy to locate the drain pump filter; just look for the technical hatch door in the body’s lower right corner. The latches only need to be unfastened by using a flat screwdriver to pry the part. The filling "mesh," which is tucked away next to the filling hose, is also simple to locate. It is easy to determine when the filters need to be cleaned. All you have to do is "detect" the indications that a blockage has already happened.
Signs of the need for cleaning
The self-diagnostic program will respond to a blockage in the filtration system first. Contemporary Samsung washing machines are outfitted with intelligent control systems that enable them to react autonomously to internal component malfunctions. Understanding which error codes point to filthy "garbage bins" is crucial.
As a result, combinations 5E, 5C, or E2 indicate issues with the garbage filter and drain, while combinations 4E, 4C, or E1 indicate inadequate water intake. When the electronics malfunction, you’ll have to make educated guesses about the cause based on ancillary indicators. We are discussing the subsequent "symptoms":
- water drains very slowly;
- the drum does not empty at all;
- the machine stopped, but did not drain the water;
- the laundry was not spun well;
- the system automatically canceled rinsing and spinning;
- the washing machine does not fill with water and does not start the cycle.
An offensive odor emanating from the washing machine is another "symptom" of signaling. The detergent causes the accumulated trash to start to rot, releasing a corresponding "aroma." However, it is preferable to clean the filters in a planned mode rather than waiting until the last minute.
Cleaning the trash filter
The trash filter "hides" behind the technical hatch door, let’s say that again. Release the latches, locate the emergency drain tube, and empty the machine of any leftover water. Place a container, old newspapers, or a rag under the hole to start. Then carry out the following.
- Unscrew the screw holding the “trash can”.
- Take the filter handle and rotate it counterclockwise.
- If the filter does not give in, treat the part with a cleaner such as WD-40 and wait 20-30 minutes.
- Take out the spiral.
We are now going to clean directly. After cleaning up debris, run a tap sanitizer.
| Model | Filter Location |
|---|---|
| Front-Loading Models | Usually at the bottom right corner, behind a small door or panel. |
| Top-Loading Models | Typically located at the bottom of the drum, or behind a cover inside the drum. |
| Washer-Dryer Combos | Often at the front bottom area, similar to front-loading models. |
It’s easy to find the filter in your Samsung washing machine, and doing so can help you maintain the machine’s performance. The filter is usually behind a small panel at the front bottom of the washing machine. If you want to make sure your machine continues to function properly, you should check here.
Usually, you have to pull or press the panel open in order to access the filter. A tiny, round or rectangular filter that is easily unscrewed or pulled out should be visible once it is open. Keeping a towel or a shallow container close at hand is a good idea because when you remove the filter, some water may spill out.
Maintaining a clean filter is essential to keeping your washing machine free of clogs and functioning properly. Coins, lint, and other debris that can build up over time are helped by its removal. You can extend the life of your washing machine and simplify your laundry routines by monitoring the filter and cleaning it as needed.
In conclusion, finding and cleaning the Samsung washing machine’s filter is a straightforward but crucial maintenance chore. It keeps your machine running smoothly and aids in the prevention of possible problems. For best results, check this area of your washer every few months and maintain its cleanliness.
If you’re wondering where the filter is in your Samsung washing machine, it’s usually behind a small panel or door at the bottom of the machine. To keep your machine operating smoothly and avoid clogs, this filter is essential for collecting lint, coins, and other debris. You can extend the life and performance of your washer by being aware of its location and access.
