What thread is on the washing machine for connecting water?

One of the most crucial things to think about when assembling a washing machine is the kind of thread used to connect the water. The water supply and your washing machine are connected securely and without leaks thanks to this thread.

Selecting the appropriate thread type can help you stay clear of potential leaks and compatibility problems. Additionally, it streamlines the installation process so you can take advantage of your washing machine’s convenience without having to deal with any extra hassles.

This tutorial will show you how to select the appropriate thread type for your setup by going over the various kinds that are frequently used for washing machine water connections.

A washing machine’s water connection thread is usually a standard size that fits most plumbing fittings, making it simple to connect to the water supply in your house. Knowing this thread size is essential whether you’re replacing old hoses or installing a new machine because it guarantees a leak-free and secure connection.

Thread of the nut of the inlet hose of the washing machine

An inlet hose is included with every automatic machine. It is utilized to link the washing machine to the source of cold water. Despite being made of plastic, the inlet pipe’s nut does its job flawlessly, holding the branch pipe firmly in place at the point where it connects to the water supply and the washing machine’s body.

An automatic machine can be connected to the water supply in a number of ways. One way to accomplish this is by using a standard mixer, cutting the clamp straight into the pipe, or putting the inlet hose in front of the flexible connection. In every scenario, extra spare parts will be needed.

Thus, in order to connect the washing machine’s inlet hose, you will need to purchase a tee. Its thread needs to be the right size. Every home washing machine adheres to the same standard, which is a thread diameter of 3/4 inches.

In order to connect the washing machine to the water supply, you can therefore safely go to the store and ask the seller for a tee tap. Since the thread diameter is unified, making a mistake in this situation will be impossible. The 3/4-inch size is appropriate for all contemporary automatic machines, regardless of manufacturer.

Let"s "join" the mixer

Once you’ve made the decision to install the machine yourself, you must select one of three appropriate ways to connect the water. Using the mixer is the most common way to connect the washing machine to the water supply. In this instance, you must have available:

• a tee tap, the diameter of the first external thread should be 3/4 inches, the second 1/2 inches, and the third internal 1/2 inches. Experts recommend buying a ball valve with an extended flag;
• an extension (this is a chrome part with threads at both ends with a diameter of 1/2 inches). The length of the element should correspond to the dimensions of the tee tap;
• sealing thread (plumbing flax).

The following is the sequence of events that will occur when the washing machine is connected to the bathroom mixer:

• turn off the supply of cold and hot water to your apartment;
• unscrew the mixer taps to make sure there is no water in the system;
• remove the nuts securing the mixer with a wrench and set it aside;
• remove the plumbing adapters from the water sockets;
• take the tee tap and extension, wrap their external threads with sealing thread;
• screw the tee tap and extension into the water sockets;
• wrap the eccentrics with plumbing thread and screw them into the tee and extension;
• put the mixer back.

To prevent future leaks from the connection, it is advised to replace the old, worn gaskets beneath the mixer as soon as possible during the work.

Subsequently, you can activate the water supply and verify if the mixer is sealed. In the event that there isn’t a leak, the work was done correctly. The inlet hose only needs to be screwed into the tee’s free hole after that. The automatic machine’s body is attached to the other end.

We “cut in” between the mixer hose and the pipe

Compared to the previous method, this one is even simpler. In this instance, you should be aware that flexible hoses typically have a five-year service life. It would be best to replace the hose right away if the permitted time has passed in order to stop a breakthrough later on.

This connection option requires the following:

• a tee tap (the requirements for it will be similar);
• plumbing linen thread for winding the thread;
• a sealing rubber for the flexible hose nut (if there is a need to completely remove the element, then buy a new hose).

You must take the following action:

• turn off the cold water supply valve;
• make sure that the water supply is turned off;
• unscrew the nut of the hose-supply;
• wrap the thread under the nut with plumbing thread;
• screw in the tee tap;
• install a new gasket (or, if necessary, replace the flexible hose entirely);
• connect the hose and the inlet hose of the washing machine to the tee tap;
• turn on the water supply and make sure that the connection is tight.

The joints ought to stay dry. Should you detect even a minor leak, disassemble the structure once more and verify that the gasket is positioned uniformly and that the thread has sufficient winding. Troubleshoot your system.

Make sure you use the correct thread type when connecting a washing machine to the water supply. The majority of home water supply fittings are compatible with washing machines because they are typically built with a standard ¾ inch thread.

A secure connection and the avoidance of leaks, which could harm your house, are ensured by using the appropriate thread size. Prior to buying any hoses or connectors, always confirm the thread type to prevent any problems during installation.

You can have a hassle-free setup and prolong the life of your washing machine by paying attention to these little things.

Video on the topic

Connecting a washing machine

water softener for washing machines and boilers

Installing a washing machine. How to connect a washing machine. First, disconnect the old washing machine.

Ball valve with a 3/4 adapter for connecting a washing machine.

installing a tap for a washing machine if the pipe thread is external, through a coupling